diff --git a/atmega32/108/Makefile b/atmega32/108/Makefile new file mode 100644 index 0000000..63f3902 --- /dev/null +++ b/atmega32/108/Makefile @@ -0,0 +1,148 @@ +# Target file name (without extension). +TARGET ?= 108 + +# Directory common source filess exist +TMK_DIR ?= ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR ?= . + +# project specific files +SRC ?= keymap_108.c \ + matrix.c \ + led.c + +CONFIG_H ?= config.h + + +# MCU name +MCU ?= atmega32 + +# Defines needed to use correct registers for the atmega32 +OPT_DEFS += -DNO_CLKPR -DTIMER0_COMP -DTIMER_PRESCALER=1024 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU ?= 16000000 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB ?= $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +BOOTLOADER_SIZE ?= 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE) + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug disabled, disables also UART RX +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= no # USB Nkey Rollover +ACTIONMAP_ENABLE ?= no # Use 16bit action codes in keymap instead of 8bit keycodes +NO_UART = yes # UART for debugging + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/protocol/vusb.mk +include $(TMK_DIR)/rules.mk + + +#---------------- Programming Options (avrdude) ---------------- + +AVRDUDE ?= avrdude + +# Programming hardware, type: avrdude -c ? +# to get a full listing. +# +# This setting asumes, that you flashed the bootloader first +AVRDUDE_PROGRAMMER ?= usbasp + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT ?= /dev/ttyACM0 # programmer connected to serial device + +AVRDUDE_WRITE_FLASH ?= -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM ?= -U eeprom:w:$(TARGET).eep + +# Brown-out detection level at VCC=2.7 V; [BODLEVEL=1] +# Ext. Crystal Osc.; High Frequency; Start-up time PWRDWN/RESET: 1024 clk + 64 ms; [CKSEL=1111 SUT=00] +# Boot Reset vector Enabled (Jump to bootloader first) +# Serial program downloading (SPI) enabled; [SPIEN=0] +# Watch-dog Timer disabled; [WDTON=0] +# Self Programming disabled; [SELFPRGEN=0] +AVRDUDE_FUSEBITS ?= -U lfuse:w:0x8F:m -U hfuse:w:0xC8:m + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER ?= -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY ?= -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE ?= -v -v + +AVRDUDE_FLAGS ?= -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + +#============================================================================ + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) $(AVRDUDE_FUSEBITS) + +# Set fuses. +fuse: + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_FUSEBITS) + +# Listing of phony targets. +.PHONY : all sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff \ +clean program fuse diff --git a/atmega32/108/keymap_108.c b/atmega32/108/keymap_108.c new file mode 100644 index 0000000..dcb4b89 --- /dev/null +++ b/atmega32/108/keymap_108.c @@ -0,0 +1,50 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +KEYMAP( + A, B, C, D, E, F, G, H, I, J, K, L, + M, N, O, P, Q, R, S, T, U, V, W, X, + Y, Z, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + ENTER,ESC,BSPACE,TAB,SPACE,MINUS, EQUAL, LBRACKET, RBRACKET, BSLASH, SCOLON,QUOTE, + GRAVE, COMMA, DOT, SLASH, PSCREEN, PAUSE, INSERT, HOME, PGUP, DELETE, END, PGDOWN, + RIGHT, LEFT, DOWN, UP, KP_SLASH, KP_ASTERISK, KP_MINUS, KP_PLUS, KP_ENTER, KP_1, KP_2, KP_3, + KP_4, KP_5, KP_6, KP_7, KP_8, KP_9, KP_0, KP_DOT, KP_EQUAL,KP_COMMA, AUDIO_MUTE, AUDIO_VOL_UP, + AUDIO_VOL_DOWN,CAPSLOCK, SCROLLLOCK, NUMLOCK, LCTRL, LSHIFT, LALT,LGUI, RCTRL, RSHIFT, RALT, RGUI +), +}; + +const action_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), + [1] = ACTION_LAYER_TAP_KEY(2, KC_BSPACE), + [2] = ACTION_LAYER_TAP_KEY(3, KC_C), + [3] = ACTION_LAYER_TAP_KEY(4, KC_V), + [4] = ACTION_LAYER_TAP_KEY(5, KC_B), + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [6] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_Z), + [7] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_X), + [8] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_N), + [10] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_M), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_COMM), + [27] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), + [29] = ACTION_MODS_KEY(MOD_LSFT, KC_SCLN), + [30] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), +}; + diff --git a/atmega32/108/keymap_common.h b/atmega32/108/keymap_common.h new file mode 100644 index 0000000..d93d382 --- /dev/null +++ b/atmega32/108/keymap_common.h @@ -0,0 +1,57 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include +#include +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, \ + K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, \ + K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, \ + K70, K71, K72, K73, K74, K75, K76, K77, K78, K79, K7A, K7B, \ + K80, K81, K82, K83, K84, K85, K86, K87, K88, K89, K8A, K8B \ +) \ +{ \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59, KC_##K5A, KC_##K5B }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, KC_##K69, KC_##K6A, KC_##K6B }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, KC_##K78, KC_##K79, KC_##K7A, KC_##K7B }, \ + { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_##K87, KC_##K88, KC_##K89, KC_##K8A, KC_##K8B } \ +} + +#endif diff --git a/atmega32/108/led.c b/atmega32/108/led.c new file mode 100644 index 0000000..fab5b41 --- /dev/null +++ b/atmega32/108/led.c @@ -0,0 +1,59 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + DDRD |= (1 << 6) | (1 << 5) | (1 << 3) | (1 << 0); + DDRA |= (1 << 7); + + DDRD |= (1 << 6) | (1 << 5) | (1 << 3); + + if (usb_led & (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<