di0ib/controller
Archived
1
0
Fork 0
Code Releases Activity
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
ICPad
controller/Output/pjrcUSB/arm/usb_desc.c

877 lines
37 KiB
C
Raw Permalink Normal View History

Adding in USB module updates from Teensyduino 1.18rc2. - For potential bug fixes - Not copied verbatim, some additions were left out
2014-02-03 00:19:58 +00:00
/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
Adding dynamic USB power support - Each scan module now has a current change callback which passes the available current as a parameter - No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration - If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases) - Now working with the Apple Ipad (no over-power messages) - Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices) - More effecient set_feature/clear_feature handling (device handler) - Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-22 03:56:52 +00:00
* Modified by Jacob Alexander (2013-2016)
Adding in USB module updates from Teensyduino 1.18rc2. - For potential bug fixes - Not copied verbatim, some additions were left out
2014-02-03 00:19:58 +00:00
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
Adding CLI and CDC Serial support for Teensy 2.0 and Teensy 2.0++ - Includes serial putchar and getchar cleanup (overall) - Moved avr-capsense to DPH (renaming) - Basic cleanup for including CLI on the avr architecture
2014-03-31 08:07:48 +00:00
* 1. The above copyright notice and this permission notice shall be
Adding in USB module updates from Teensyduino 1.18rc2. - For potential bug fixes - Not copied verbatim, some additions were left out
2014-02-03 00:19:58 +00:00
* included in all copies or substantial portions of the Software.
*
Adding CLI and CDC Serial support for Teensy 2.0 and Teensy 2.0++ - Includes serial putchar and getchar cleanup (overall) - Moved avr-capsense to DPH (renaming) - Basic cleanup for including CLI on the avr architecture
2014-03-31 08:07:48 +00:00
* 2. If the Software is incorporated into a build system that allows
Adding in USB module updates from Teensyduino 1.18rc2. - For potential bug fixes - Not copied verbatim, some additions were left out
2014-02-03 00:19:58 +00:00
* selection among a list of target devices, then similar target
* devices manufactured by PJRC.COM must be included in the list of
* target devices and selectable in the same manner.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- Includes -----
// Local Includes
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
#include "usb_desc.h"
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
// Generated Includes
#include <kll_defs.h>
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- Macros -----
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
#define LSB(n) ((n) & 255)
#define MSB(n) (((n) >> 8) & 255)
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- USB Device Descriptor -----
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// USB Device Descriptor. The USB host reads this first, to learn
// what type of device is connected.
static uint8_t device_descriptor[] = {
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
18, // bLength
1, // bDescriptorType
0x00, 0x02, // bcdUSB
DEVICE_CLASS, // bDeviceClass
DEVICE_SUBCLASS, // bDeviceSubClass
DEVICE_PROTOCOL, // bDeviceProtocol
EP0_SIZE, // bMaxPacketSize0
LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
0x00, 0x01, // bcdDevice
1, // iManufacturer
2, // iProduct
3, // iSerialNumber
1 // bNumConfigurations
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
};
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// USB Device Qualifier Descriptor
static uint8_t device_qualifier_descriptor[] = {
0 // Indicate only single speed
/* Device qualifier example (used for specifying multiple USB speeds)
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
10, // bLength
6, // bDescriptorType
0x00, 0x02, // bcdUSB
DEVICE_CLASS, // bDeviceClass
DEVICE_SUBCLASS, // bDeviceSubClass
DEVICE_PROTOCOL, // bDeviceProtocol
EP0_SIZE, // bMaxPacketSize0
Fixing NKRO for Windows.
2014-10-01 07:16:14 +00:00
0, // bNumOtherSpeedConfigurations
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
0 // bReserved
*/
};
// USB Debug Descriptor
// XXX Not sure of exact use, lsusb requests it
static uint8_t usb_debug_descriptor[] = {
0
};
// XXX
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// These descriptors must NOT be "const", because the USB DMA
// has trouble accessing flash memory with enough bandwidth
// while the processor is executing from flash.
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// XXX
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
Adding basic remote capabilities + UART Rx DMA buffers - Rx buffers weren't fast enough, had to use DMA :D - Basic LCD remote capabilities are working, single node - Multi-node broadcast seems to have a bug still - DMA ring buffer allowed for significant processing simplification * There is an overrun risk, but the buffer is large and generally there isn't too much data being sent (just very quickly) - Split out LCD layer stack capability into itself and an "exact" version used for updating remote nodes
2015-10-15 07:16:36 +00:00
// ----- USB HID Report Descriptors -----
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// Each HID interface needs a special report descriptor that tells
// the meaning and format of the data.
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
static uint8_t keyboard_report_desc[] = {
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// Keyboard Collection
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x05, 0x01, // Usage Page (Generic Desktop),
0x09, 0x06, // Usage (Keyboard),
0xA1, 0x01, // Collection (Application) - Keyboard,
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// Modifier Byte
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x08, // Report Count (8),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0xE0, // Usage Minimum (224),
0x29, 0xE7, // Usage Maximum (231),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x01, // Logical Maximum (1),
0x81, 0x02, // Input (Data, Variable, Absolute),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// Reserved Byte
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x08, // Report Size (8),
0x95, 0x01, // Report Count (1),
0x81, 0x03, // Output (Constant),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// LED Report
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x05, // Report Count (5),
0x05, 0x08, // Usage Page (LEDs),
0x19, 0x01, // Usage Minimum (1),
0x29, 0x05, // Usage Maximum (5),
0x91, 0x02, // Output (Data, Variable, Absolute),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// LED Report Padding
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x03, // Report Size (3),
0x95, 0x01, // Report Count (1),
0x91, 0x03, // Output (Constant),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// Normal Keys
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x08, // Report Size (8),
0x95, 0x06, // Report Count (6),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x7F, // Logical Maximum(104),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0x00, // Usage Minimum (0),
0x29, 0x7F, // Usage Maximum (104),
0x81, 0x00, // Input (Data, Array),
0xc0, // End Collection - Keyboard
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
};
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
static uint8_t nkro_keyboard_report_desc[] = {
// Keyboard Collection
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x05, 0x01, // Usage Page (Generic Desktop),
0x09, 0x06, // Usage (Keyboard),
0xA1, 0x01, // Collection (Application) - Keyboard,
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// LED Report
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x85, 0x01, // Report ID (1),
0x75, 0x01, // Report Size (1),
0x95, 0x05, // Report Count (5),
0x05, 0x08, // Usage Page (LEDs),
0x19, 0x01, // Usage Minimum (1),
0x29, 0x05, // Usage Maximum (5),
0x91, 0x02, // Output (Data, Variable, Absolute),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// LED Report Padding
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x03, // Report Size (3),
0x95, 0x01, // Report Count (1),
0x91, 0x03, // Output (Constant),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// Normal Keys - Using an NKRO Bitmap
//
// NOTES:
// Supports all keys defined by the spec, except 1-3 which define error events
// and 0 which is "no keys pressed"
// See http://www.usb.org/developers/hidpage/Hut1_12v2.pdf Chapter 10
// Or Macros/PartialMap/usb_hid.h
//
Fixing Linux NKRO Delete bug - Fixed descriptor to not include USB Code 156 (Clear) - This USB Code affects repeating Delete
2014-11-11 05:02:25 +00:00
// 50 (ISO \ due to \ bug) and 156 (Clear due to Delete bug) must be excluded
// due to a Linux bug with bitmaps (not useful anyways)
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// 165-175 are reserved/unused as well as 222-223 and 232-65535
//
Fixing Mac OSX USB NKRO - OSX doesn't properly follow the spec when it comes to padding bits (when using bitfields) - Everything seems to work when I don't use them - NKRO tested working on OSX
2014-11-03 07:24:59 +00:00
// Compatibility Notes:
// - Using a second endpoint for a boot mode device helps with compatibility
// - DO NOT use Padding in the descriptor for bitfields
// (Mac OSX silently fails... Windows/Linux work correctly)
Fixing NKRO on Windows 8.1 - Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX - NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time (due to 8.1 bug in the HID spec)
2014-11-13 07:04:50 +00:00
// - DO NOT use Report IDs, Windows 8.1 will not update keyboard correctly (modifiers disappear)
// (all other OSs, including OSX work fine...)
// (you can use them *iff* you only have 1 per collection)
// - Mac OSX and Windows 8.1 are extremely picky about padding
Fixing Mac OSX USB NKRO - OSX doesn't properly follow the spec when it comes to padding bits (when using bitfields) - Everything seems to work when I don't use them - NKRO tested working on OSX
2014-11-03 07:24:59 +00:00
//
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// Packing of bitmaps are as follows:
Fixing NKRO on Windows 8.1 - Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX - NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time (due to 8.1 bug in the HID spec)
2014-11-13 07:04:50 +00:00
// 4-49 : 6 bytes (0x04-0x31) ( 46 bits + 2 padding bits for 6 bytes total)
// 51-155 : 14 bytes (0x33-0x9B) (105 bits + 6 padding bits for 15 bytes total)
// 157-164 : 1 byte (0x9D-0xA4) ( 8 bits)
// 176-221 : 6 bytes (0xB0-0xDD) ( 46 bits + 2 padding bits for 6 bytes total)
// 224-231 : 1 byte (0xE0-0xE7) ( 8 bits)
// Modifier Byte
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x08, // Report Count (8),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x01, // Logical Maximum (1),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0xE0, // Usage Minimum (224),
0x29, 0xE7, // Usage Maximum (231),
0x81, 0x02, // Input (Data, Variable, Absolute),
Fixing NKRO on Windows 8.1 - Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX - NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time (due to 8.1 bug in the HID spec)
2014-11-13 07:04:50 +00:00
Fixing Linux NKRO Delete bug - Fixed descriptor to not include USB Code 156 (Clear) - This USB Code affects repeating Delete
2014-11-11 05:02:25 +00:00
// 4-49 (6 bytes/46 bits) - MainKeys
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x2E, // Report Count (46),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x01, // Logical Maximum (1),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0x04, // Usage Minimum (4),
0x29, 0x31, // Usage Maximum (49),
0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
Fixing NKRO on Windows 8.1 - Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX - NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time (due to 8.1 bug in the HID spec)
2014-11-13 07:04:50 +00:00
// Padding (2 bits)
0x75, 0x02, // Report Size (2),
0x95, 0x01, // Report Count (1),
0x81, 0x03, // Input (Constant),
Fixed Linux NKRO bitmap bug. - Thanks hasu for pointing it out - Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)
2014-10-02 08:40:14 +00:00
Fixing Linux NKRO Delete bug - Fixed descriptor to not include USB Code 156 (Clear) - This USB Code affects repeating Delete
2014-11-11 05:02:25 +00:00
// 51-155 (14 bytes/105 bits) - SecondaryKeys
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x69, // Report Count (105),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x01, // Logical Maximum (1),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0x33, // Usage Minimum (51),
0x29, 0x9B, // Usage Maximum (155),
0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield),
Fixed Linux NKRO bitmap bug. - Thanks hasu for pointing it out - Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)
2014-10-02 08:40:14 +00:00
Fixing NKRO on Windows 8.1 - Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX - NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time (due to 8.1 bug in the HID spec)
2014-11-13 07:04:50 +00:00
// Padding (7 bits)
0x75, 0x07, // Report Size (7),
0x95, 0x01, // Report Count (1),
0x81, 0x03, // Input (Constant),
Fixed Linux NKRO bitmap bug. - Thanks hasu for pointing it out - Keycode 50 is problematic under Linux, so removing (it's a duplicate keycode anyways)
2014-10-02 08:40:14 +00:00
Fixing Linux NKRO Delete bug - Fixed descriptor to not include USB Code 156 (Clear) - This USB Code affects repeating Delete
2014-11-11 05:02:25 +00:00
// 157-164 (1 byte/8 bits) - TertiaryKeys
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x08, // Report Count (8),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x01, // Logical Maximum (1),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0x9D, // Usage Minimum (157),
0x29, 0xA4, // Usage Maximum (164),
0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield),
Fixing Linux NKRO Delete bug - Fixed descriptor to not include USB Code 156 (Clear) - This USB Code affects repeating Delete
2014-11-11 05:02:25 +00:00
// 176-221 (6 bytes/46 bits) - QuartiaryKeys
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x75, 0x01, // Report Size (1),
0x95, 0x2E, // Report Count (46),
0x15, 0x00, // Logical Minimum (0),
0x25, 0x01, // Logical Maximum (1),
0x05, 0x07, // Usage Page (Key Codes),
0x19, 0xB0, // Usage Minimum (176),
0x29, 0xDD, // Usage Maximum (221),
0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
Fixing NKRO on Windows 8.1 - Had to re-write descriptor to support Windows 8.1 while still working with Mac OSX - NKRO keyboard is now more bandwidth intensive as all the keys must be updated at the same time (due to 8.1 bug in the HID spec)
2014-11-13 07:04:50 +00:00
// Padding (2 bits)
0x75, 0x02, // Report Size (2),
0x95, 0x01, // Report Count (1),
0x81, 0x03, // Input (Constant),
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0xc0, // End Collection - Keyboard
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
};
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
// System Control and Consumer Control
static uint8_t sys_ctrl_report_desc[] = {
Prep for mouse support
2015-09-21 01:47:10 +00:00
// System Control Collection (8 bits)
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
//
// NOTES:
// Not bothering with NKRO for this table. If there's need, I can implement it. -HaaTa
// Using a 1KRO scheme
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x05, 0x01, // Usage Page (Generic Desktop),
0x09, 0x80, // Usage (System Control),
0xA1, 0x01, // Collection (Application),
0x85, 0x02, // Report ID (2),
0x75, 0x08, // Report Size (8),
0x95, 0x01, // Report Count (1),
0x16, 0x81, 0x00, // Logical Minimum (129),
0x26, 0xB7, 0x00, // Logical Maximum (183),
0x19, 0x81, // Usage Minimum (129),
0x29, 0xB7, // Usage Maximum (183),
0x81, 0x00, // Input (Data, Array),
0xc0, // End Collection - System Control
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
Prep for mouse support
2015-09-21 01:47:10 +00:00
// Consumer Control Collection - Media Keys (16 bits)
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
//
// NOTES:
// Not bothering with NKRO for this table. If there's a need, I can implement it. -HaaTa
// Using a 1KRO scheme
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x05, 0x0c, // Usage Page (Consumer),
0x09, 0x01, // Usage (Consumer Control),
0xA1, 0x01, // Collection (Application),
0x85, 0x03, // Report ID (3),
0x75, 0x10, // Report Size (16),
0x95, 0x01, // Report Count (1),
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
0x16, 0x01, 0x00, // Logical Minimum (1),
Typo from the last commit.
2015-10-18 04:03:07 +00:00
0x26, 0x9D, 0x02, // Logical Maximum (669),
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x05, 0x0C, // Usage Page (Consumer),
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
0x19, 0x01, // Usage Minimum (1),
Adding support for kll 0.3d - Requires kll compiler update - Includes descriptor update to handle new consumer control codes
2015-10-17 22:03:21 +00:00
0x2A, 0x9D, 0x02, // Usage Maximum (669),
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
0x81, 0x00, // Input (Data, Array),
0xc0, // End Collection - Consumer Control
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
};
// Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension
static uint8_t mouse_report_desc[] = {
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x02, // Usage (Mouse)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
0xA1, 0x01, // Collection (Application)
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x09, 0x02, // Usage (Mouse)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
0xA1, 0x02, // Collection (Logical)
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x09, 0x01, // Usage (Pointer)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
// Buttons (16 bits)
0xA1, 0x00, // Collection (Physical) - Buttons
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x05, 0x09, // Usage Page (Button)
0x19, 0x01, // Usage Minimum (Button 1)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
0x29, 0x10, // Usage Maximum (Button 16)
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
0x95, 0x10, // Report Count (16)
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x81, 0x02, // Input (Data,Var,Abs)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
// Pointer (32 bits)
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x05, 0x01, // Usage PAGE (Generic Desktop)
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
0x16, 0x01, 0x80, // Logical Minimum (-32 767)
0x26, 0xFF, 0x7F, // Logical Maximum (32 767)
0x75, 0x10, // Report Size (16)
Prep for mouse support
2015-09-21 01:47:10 +00:00
0x95, 0x02, // Report Count (2)
0x81, 0x06, // Input (Data,Var,Rel)
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
/*
Prep for mouse support
2015-09-21 01:47:10 +00:00
// Vertical Wheel
// - Multiplier (2 bits)
0xa1, 0x02, // Collection (Logical)
0x09, 0x48, // Usage (Resolution Multiplier)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x35, 0x01, // Physical Minimum (1)
0x45, 0x04, // Physical Maximum (4)
0x75, 0x02, // Report Size (2)
0x95, 0x01, // Report Count (1)
0xa4, // Push
0xb1, 0x02, // Feature (Data,Var,Abs)
// - Device (8 bits)
0x09, 0x38, // Usage (Wheel)
0x15, 0x81, // Logical Minimum (-127)
0x25, 0x7f, // Logical Maximum (127)
0x35, 0x00, // Physical Minimum (0) - reset physical
0x45, 0x00, // Physical Maximum (0)
0x75, 0x08, // Report Size (8)
0x81, 0x06, // Input (Data,Var,Rel)
0xc0, // End Collection - Vertical Wheel
// Horizontal Wheel
// - Multiplier (2 bits)
0xa1, 0x02, // Collection (Logical)
0x09, 0x48, // Usage (Resolution Multiplier)
0xb4, // Pop
0xb1, 0x02, // Feature (Data,Var,Abs)
// - Padding (4 bits)
0x35, 0x00, // Physical Minimum (0) - reset physical
0x45, 0x00, // Physical Maximum (0)
0x75, 0x04, // Report Size (4)
0xb1, 0x03, // Feature (Cnst,Var,Abs)
// - Device (8 bits)
0x05, 0x0c, // Usage Page (Consumer Devices)
0x0a, 0x38, 0x02, // Usage (AC Pan)
0x15, 0x81, // Logical Minimum (-127)
0x25, 0x7f, // Logical Maximum (127)
0x75, 0x08, // Report Size (8)
0x81, 0x06, // Input (Data,Var,Rel)
0xc0, // End Collection - Horizontal Wheel
Adding relative movement mouse key support - Still very basic (lots of room for improvement) - Capability format will likely change at some point - 16 bit movement control, however repeat rate limits usability (will need KLL 0.4 to make better)
2016-03-22 05:23:57 +00:00
*/
Prep for mouse support
2015-09-21 01:47:10 +00:00
0xc0, // End Collection - Buttons
0xc0, // End Collection - Mouse Logical
0xc0 // End Collection - Mouse Application
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
};
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
// Joystick Protocol, HID 1.11 spec, Apendix D, page 64-65
static uint8_t joystick_report_desc[] = {
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x04, // Usage (Joystick)
0xA1, 0x01, // Collection (Application)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x20, // Report Count (32)
0x05, 0x09, // Usage Page (Button)
0x19, 0x01, // Usage Minimum (Button #1)
0x29, 0x20, // Usage Maximum (Button #32)
0x81, 0x02, // Input (variable,absolute)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x07, // Logical Maximum (7)
0x35, 0x00, // Physical Minimum (0)
0x46, 0x3B, 0x01, // Physical Maximum (315)
0x75, 0x04, // Report Size (4)
0x95, 0x01, // Report Count (1)
0x65, 0x14, // Unit (20)
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x39, // Usage (Hat switch)
0x81, 0x42, // Input (variable,absolute,null_state)
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x01, // Usage (Pointer)
0xA1, 0x00, // Collection ()
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x03, // Logical Maximum (1023)
0x75, 0x0A, // Report Size (10)
0x95, 0x04, // Report Count (4)
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
0x09, 0x32, // Usage (Z)
0x09, 0x35, // Usage (Rz)
0x81, 0x02, // Input (variable,absolute)
0xC0, // End Collection
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x03, // Logical Maximum (1023)
0x75, 0x0A, // Report Size (10)
0x95, 0x02, // Report Count (2)
0x09, 0x36, // Usage (Slider)
0x09, 0x36, // Usage (Slider)
0x81, 0x02, // Input (variable,absolute)
0xC0 // End Collection
};
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- USB Configuration -----
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// USB Configuration Descriptor. This huge descriptor tells all
// of the devices capbilities.
static uint8_t config_descriptor[CONFIG_DESC_SIZE] = {
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// --- Configuration ---
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
9, // bLength;
2, // bDescriptorType;
LSB(CONFIG_DESC_SIZE), // wTotalLength
MSB(CONFIG_DESC_SIZE),
NUM_INTERFACE, // bNumInterfaces
1, // bConfigurationValue
0, // iConfiguration
0xA0, // bmAttributes
Adding dynamic USB power support - Each scan module now has a current change callback which passes the available current as a parameter - No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration - If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases) - Now working with the Apple Ipad (no over-power messages) - Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices) - More effecient set_feature/clear_feature handling (device handler) - Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-22 03:56:52 +00:00
250, // bMaxPower - Entry Index 8
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// --- Keyboard HID --- Boot Mode Keyboard Interface
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
KEYBOARD_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
0x01, // bInterfaceProtocol (0x01 = Keyboard)
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
KEYBOARD_INTERFACE + 4, // iInterface
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
KeyboardLocale_define, // bCountryCode
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(keyboard_report_desc)), // wDescriptorLength
MSB(sizeof(keyboard_report_desc)),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 7 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
KEYBOARD_SIZE, 0, // wMaxPacketSize
KEYBOARD_INTERVAL, // bInterval
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// --- NKRO Keyboard HID --- OS Mode Keyboard Interface
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
NKRO_KEYBOARD_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x00, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
0x01, // bInterfaceProtocol (0x01 = Keyboard)
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
NKRO_KEYBOARD_INTERFACE + 4, // iInterface
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
KeyboardLocale_define, // bCountryCode
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(nkro_keyboard_report_desc)), // wDescriptorLength
MSB(sizeof(nkro_keyboard_report_desc)),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 7 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
NKRO_KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
NKRO_KEYBOARD_SIZE, 0, // wMaxPacketSize
NKRO_KEYBOARD_INTERVAL, // bInterval
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// --- Serial CDC --- CDC IAD Descriptor
// - 8 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// interface association descriptor, USB ECN, Table 9-Z
8, // bLength
11, // bDescriptorType
CDC_STATUS_INTERFACE, // bFirstInterface
2, // bInterfaceCount
0x02, // bFunctionClass
0x02, // bFunctionSubClass
0x01, // bFunctionProtocol
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
CDC_STATUS_INTERFACE + 4, // iFunction
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// --- Serial CDC --- CDC Data Interface
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
CDC_STATUS_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x02, // bInterfaceClass
0x02, // bInterfaceSubClass
0x01, // bInterfaceProtocol
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
CDC_STATUS_INTERFACE + 4, // iInterface
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 5 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
5, // bFunctionLength
0x24, // bDescriptorType
0x00, // bDescriptorSubtype
0x10, 0x01, // bcdCDC
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 5 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
5, // bFunctionLength
0x24, // bDescriptorType
0x01, // bDescriptorSubtype
0x01, // bmCapabilities
CDC_DATA_INTERFACE, // bDataInterface
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 4 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
4, // bFunctionLength
0x24, // bDescriptorType
0x02, // bDescriptorSubtype
0x06, // bmCapabilities
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 5 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
5, // bFunctionLength
0x24, // bDescriptorType
0x06, // bDescriptorSubtype
CDC_STATUS_INTERFACE, // bMasterInterface
CDC_DATA_INTERFACE, // bSlaveInterface0
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 7 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
CDC_ACM_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
CDC_ACM_SIZE, 0, // wMaxPacketSize
64, // bInterval
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
CDC_DATA_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
2, // bNumEndpoints
0x0A, // bInterfaceClass
0x00, // bInterfaceSubClass
0x00, // bInterfaceProtocol
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
CDC_DATA_INTERFACE + 4, // iInterface
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 7 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
CDC_RX_ENDPOINT, // bEndpointAddress
0x02, // bmAttributes (0x02=bulk)
CDC_RX_SIZE, 0, // wMaxPacketSize
0, // bInterval
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 7 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
CDC_TX_ENDPOINT | 0x80, // bEndpointAddress
0x02, // bmAttributes (0x02=bulk)
CDC_TX_SIZE, 0, // wMaxPacketSize
0, // bInterval
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
// --- Mouse Interface ---
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
MOUSE_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x00, // bInterfaceSubClass (0x01 = Boot)
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
0x02, // bInterfaceProtocol (0x02 = Mouse)
MOUSE_INTERFACE + 4, // iInterface
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 9 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
0, // bCountryCode
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(mouse_report_desc)), // wDescriptorLength
MSB(sizeof(mouse_report_desc)),
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// - 7 bytes -
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
MOUSE_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
MOUSE_SIZE, 0, // wMaxPacketSize
MOUSE_INTERVAL, // bInterval
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
// --- Joystick Interface ---
// - 9 bytes -
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
JOYSTICK_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x00, // bInterfaceSubClass
0x00, // bInterfaceProtocol
JOYSTICK_INTERFACE + 4, // iInterface
// - 9 bytes -
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
0, // bCountryCode
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(joystick_report_desc)), // wDescriptorLength
MSB(sizeof(joystick_report_desc)),
// - 7 bytes -
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
JOYSTICK_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
JOYSTICK_SIZE, 0, // wMaxPacketSize
JOYSTICK_INTERVAL, // bInterval
// --- System/Consumer Control ---
// - 9 bytes -
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
9, // bLength
4, // bDescriptorType
SYS_CTRL_INTERFACE, // bInterfaceNumber
0, // bAlternateSetting
1, // bNumEndpoints
0x03, // bInterfaceClass (0x03 = HID)
0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
0x00, // bInterfaceProtocol (0x00 = None)
SYS_CTRL_INTERFACE + 4, // iInterface
// - 9 bytes -
// HID interface descriptor, HID 1.11 spec, section 6.2.1
9, // bLength
0x21, // bDescriptorType
0x11, 0x01, // bcdHID
KeyboardLocale_define, // bCountryCode
1, // bNumDescriptors
0x22, // bDescriptorType
LSB(sizeof(sys_ctrl_report_desc)), // wDescriptorLength
MSB(sizeof(sys_ctrl_report_desc)),
// - 7 bytes -
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
7, // bLength
5, // bDescriptorType
SYS_CTRL_ENDPOINT | 0x80, // bEndpointAddress
0x03, // bmAttributes (0x03=intr)
SYS_CTRL_SIZE, 0, // wMaxPacketSize
SYS_CTRL_INTERVAL, // bInterval
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
};
Adding dynamic USB power support - Each scan module now has a current change callback which passes the available current as a parameter - No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration - If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases) - Now working with the Apple Ipad (no over-power messages) - Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices) - More effecient set_feature/clear_feature handling (device handler) - Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-22 03:56:52 +00:00
uint8_t *usb_bMaxPower = &config_descriptor[8];
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- String Descriptors -----
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// The descriptors above can provide human readable strings,
// referenced by index numbers. These descriptors are the
// actual string data
struct usb_string_descriptor_struct {
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t wString[];
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
};
Finished USB for Teensy 3.1 (Now 3.1 compatible!)
2014-02-03 05:12:20 +00:00
extern struct usb_string_descriptor_struct usb_string_manufacturer_name
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
__attribute__ ((weak, alias("usb_string_manufacturer_name_default")));
Finished USB for Teensy 3.1 (Now 3.1 compatible!)
2014-02-03 05:12:20 +00:00
extern struct usb_string_descriptor_struct usb_string_product_name
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
__attribute__ ((weak, alias("usb_string_product_name_default")));
Finished USB for Teensy 3.1 (Now 3.1 compatible!)
2014-02-03 05:12:20 +00:00
extern struct usb_string_descriptor_struct usb_string_serial_number
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
__attribute__ ((weak, alias("usb_string_serial_number_default")));
Finished USB for Teensy 3.1 (Now 3.1 compatible!)
2014-02-03 05:12:20 +00:00
struct usb_string_descriptor_struct string0 = {
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
4,
3,
{0x0409}
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
};
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
#define usb_string_descriptor(name, str) \
struct usb_string_descriptor_struct name = { \
sizeof(str), \
3, \
{str} \
}
usb_string_descriptor( usb_string_manufacturer_name_default, STR_MANUFACTURER );
usb_string_descriptor( usb_string_product_name_default, STR_PRODUCT );
usb_string_descriptor( usb_string_serial_number_default, STR_SERIAL );
usb_string_descriptor( usb_string_keyboard_name, KEYBOARD_NAME );
usb_string_descriptor( usb_string_nkro_keyboard_name, NKRO_KEYBOARD_NAME );
usb_string_descriptor( usb_string_cdc_status_name, CDC_STATUS_NAME );
usb_string_descriptor( usb_string_cdc_data_name, CDC_DATA_NAME );
usb_string_descriptor( usb_string_mouse_name, MOUSE_NAME );
usb_string_descriptor( usb_string_joystick_name, JOYSTICK_NAME );
usb_string_descriptor( usb_string_sys_ctrl_name, SYS_CTRL_NAME );
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- Descriptors List -----
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// This table provides access to all the descriptor data above.
const usb_descriptor_list_t usb_descriptor_list[] = {
//wValue, wIndex, address, length
{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
{0x0200, 0x0000, config_descriptor, sizeof(config_descriptor)},
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
{0x0600, 0x0000, device_qualifier_descriptor, sizeof(device_qualifier_descriptor)},
{0x0A00, 0x0000, usb_debug_descriptor, sizeof(usb_debug_descriptor)},
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
{0x2200, KEYBOARD_INTERFACE, keyboard_report_desc, sizeof(keyboard_report_desc)},
{0x2100, KEYBOARD_INTERFACE, config_descriptor + KEYBOARD_DESC_OFFSET, 9},
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
{0x2200, NKRO_KEYBOARD_INTERFACE, nkro_keyboard_report_desc, sizeof(nkro_keyboard_report_desc)},
{0x2100, NKRO_KEYBOARD_INTERFACE, config_descriptor + NKRO_KEYBOARD_DESC_OFFSET, 9},
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
{0x2200, MOUSE_INTERFACE, mouse_report_desc, sizeof(mouse_report_desc)},
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
{0x2100, MOUSE_INTERFACE, config_descriptor + MOUSE_DESC_OFFSET, 9},
{0x2200, JOYSTICK_INTERFACE, joystick_report_desc, sizeof(joystick_report_desc)},
{0x2100, JOYSTICK_INTERFACE, config_descriptor + JOYSTICK_DESC_OFFSET, 9},
{0x2200, SYS_CTRL_INTERFACE, sys_ctrl_report_desc, sizeof(sys_ctrl_report_desc)},
{0x2100, SYS_CTRL_INTERFACE, config_descriptor + SYS_CTRL_DESC_OFFSET, 9},
#define iInterfaceString(num, var) \
{0x0300 + 4 + num, 0x409, (const uint8_t *)&var, 0 }
Fix whitespace Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-09 01:40:01 +00:00
{0x0300, 0x0000, (const uint8_t *)&string0, 0},
{0x0301, 0x0409, (const uint8_t *)&usb_string_manufacturer_name, 0},
{0x0302, 0x0409, (const uint8_t *)&usb_string_product_name, 0},
{0x0303, 0x0409, (const uint8_t *)&usb_string_serial_number, 0},
FIxing Media Keys and general USB compatibilty - Media keys tested working on Linux/Windows/Mac (use Consumer control) - Fixed enumeration delays - Fixed virtual serial port configuration issues - Fixed GET_REPORT and SET_REPORT - Added intial descriptors and endpoints for Mouse and Joystick devices - Split out the consumer and system control endpoint - Added more fault debugging messages - Added interface names to endpoints (visible in Windows Device Manager) - Added KLL define for keyboard locale
2015-08-19 07:01:15 +00:00
iInterfaceString( KEYBOARD_INTERFACE, usb_string_keyboard_name ),
iInterfaceString( NKRO_KEYBOARD_INTERFACE, usb_string_nkro_keyboard_name ),
iInterfaceString( CDC_STATUS_INTERFACE, usb_string_cdc_status_name ),
iInterfaceString( CDC_DATA_INTERFACE, usb_string_cdc_data_name ),
iInterfaceString( MOUSE_INTERFACE, usb_string_mouse_name ),
iInterfaceString( JOYSTICK_INTERFACE, usb_string_joystick_name ),
iInterfaceString( SYS_CTRL_INTERFACE, usb_string_sys_ctrl_name ),
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
{0, 0, NULL, 0}
};
More preparation for NKRO USB for arm - Added NKRO descriptor - Added NKRO HID descriptor - Updated boot HID descriptor - Fixed many bugs with the pjrc ARM usb stack (with USB HID)
2014-09-28 23:44:57 +00:00
// ----- Endpoint Configuration -----
// See usb_desc.h for Endpoint configuration
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
// 0x00 = not used
// 0x19 = Recieve only
// 0x15 = Transmit only
// 0x1D = Transmit & Recieve
More work on mk20dx128vlf5 port. - Basic compilation and loading is working - LED can be turned on/off - USB not yet working
2014-06-26 07:54:39 +00:00
//
const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS] =
Adding initial Teensy 3 support, compiles, but not fully functional yet. - CDC Output seems to be working - USB Keyboard output has not been tested, but is "ready" - UART and Timers have not been tested, or fully utilized - Issues using Timer 0 - Initial template for MBC-55X Scan module (only module currently compatible with the arm build) - Updated the interface to the AVR usb module for symmetry with the ARM usb module - Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 06:47:52 +00:00
{
#if (defined(ENDPOINT1_CONFIG) && NUM_ENDPOINTS >= 1)
ENDPOINT1_CONFIG,
#elif (NUM_ENDPOINTS >= 1)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT2_CONFIG) && NUM_ENDPOINTS >= 2)
ENDPOINT2_CONFIG,
#elif (NUM_ENDPOINTS >= 2)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT3_CONFIG) && NUM_ENDPOINTS >= 3)
ENDPOINT3_CONFIG,
#elif (NUM_ENDPOINTS >= 3)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT4_CONFIG) && NUM_ENDPOINTS >= 4)
ENDPOINT4_CONFIG,
#elif (NUM_ENDPOINTS >= 4)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT5_CONFIG) && NUM_ENDPOINTS >= 5)
ENDPOINT5_CONFIG,
#elif (NUM_ENDPOINTS >= 5)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT6_CONFIG) && NUM_ENDPOINTS >= 6)
ENDPOINT6_CONFIG,
#elif (NUM_ENDPOINTS >= 6)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT7_CONFIG) && NUM_ENDPOINTS >= 7)
ENDPOINT7_CONFIG,
#elif (NUM_ENDPOINTS >= 7)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT8_CONFIG) && NUM_ENDPOINTS >= 8)
ENDPOINT8_CONFIG,
#elif (NUM_ENDPOINTS >= 8)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT9_CONFIG) && NUM_ENDPOINTS >= 9)
ENDPOINT9_CONFIG,
#elif (NUM_ENDPOINTS >= 9)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT10_CONFIG) && NUM_ENDPOINTS >= 10)
ENDPOINT10_CONFIG,
#elif (NUM_ENDPOINTS >= 10)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT11_CONFIG) && NUM_ENDPOINTS >= 11)
ENDPOINT11_CONFIG,
#elif (NUM_ENDPOINTS >= 11)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT12_CONFIG) && NUM_ENDPOINTS >= 12)
ENDPOINT12_CONFIG,
#elif (NUM_ENDPOINTS >= 12)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT13_CONFIG) && NUM_ENDPOINTS >= 13)
ENDPOINT13_CONFIG,
#elif (NUM_ENDPOINTS >= 13)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT14_CONFIG) && NUM_ENDPOINTS >= 14)
ENDPOINT14_CONFIG,
#elif (NUM_ENDPOINTS >= 14)
ENDPOINT_UNUSED,
#endif
#if (defined(ENDPOINT15_CONFIG) && NUM_ENDPOINTS >= 15)
ENDPOINT15_CONFIG,
#elif (NUM_ENDPOINTS >= 15)
ENDPOINT_UNUSED,
#endif
};
Fixing Mac OSX USB NKRO - OSX doesn't properly follow the spec when it comes to padding bits (when using bitfields) - Everything seems to work when I don't use them - NKRO tested working on OSX
2014-11-03 07:24:59 +00:00
Copy Permalink