di0ib/controller
Archived
1
0
Fork 0
Code Releases Activity
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
52c8ffc964
controller/Scan/STLcd/capabilities.kll

78 lines
5.1 KiB
Plaintext
Raw Normal View History

Adding 16-bit brightness control to LCD backlight
2015-08-02 04:59:43 +00:00
Name = STLcdCapabilities;
Version = 0.1;
Author = "HaaTa (Jacob Alexander) 2015";
KLL = 0.3c;
# Modified Date
Date = 2015-08-01;
# Defines available to the STLcd sub-module
# PWM Prescalar
# In general this can be left alone
# A higher prescalar should be lower power usage (less switching)
# However, flickering may be noticeable.
#
# Here's a calculation table valid at a 72 MHz system clock
# Prescalars range from 0 to 7 (1 to 128)
Adding cli API call to set LCD backlight brightness (16 bit per channel)
2015-08-02 05:47:34 +00:00
# Base FTM clock selection (72 MHz system clock)
Adding API to set pixels on LCD screen
2015-08-02 07:00:11 +00:00
# @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period
Adding cli API call to set LCD backlight brightness (16 bit per channel)
2015-08-02 05:47:34 +00:00
# Higher pre-scalar will use the most power (also look the best)
# Pre-scalar calculations
# 0 - 72 MHz -> 549 Hz
# 1 - 36 MHz -> 275 Hz
# 2 - 18 MHz -> 137 Hz
# 3 - 9 MHz -> 69 Hz (Slightly visible flicker)
# 4 - 4 500 kHz -> 34 Hz (Visible flickering)
# 5 - 2 250 kHz -> 17 Hz
# 6 - 1 125 kHz -> 9 Hz
# 7 - 562 500 Hz -> 4 Hz
Adding 16-bit brightness control to LCD backlight
2015-08-02 04:59:43 +00:00
STLcdBacklightPrescalar => STLcdBacklightPrescalar_define;
STLcdBacklightPrescalar = 0;
# Default Backlight Channel Brightness
# There are 3 channels, RGB
# In order to get other colors you must mix the 3 colors
# Each channel is a 16-bit register (65536 levels)
# Technically, this means, the backlight is a 48-bit RGB pixel
# In practice, it may be difficult to get color consistency at times if too bright or too dim
STLcdBacklightRed => STLcdBacklightRed_define;
STLcdBacklightGreen => STLcdBacklightGreen_define;
STLcdBacklightBlue => STLcdBacklightBlue_define;
# Defaults to 6% brightness, white
Adding cli API call to set LCD backlight brightness (16 bit per channel)
2015-08-02 05:47:34 +00:00
STLcdBacklightRed = 0x0FFF;
STLcdBacklightGreen = 0x0FFF;
STLcdBacklightBlue = 0x0FFF;
Adding 16-bit brightness control to LCD backlight
2015-08-02 04:59:43 +00:00
Adding capability to set default image on LCD
2015-08-02 06:13:19 +00:00
# Default LCD Image
#
# The easiest way to generate this data is using the bitmap2Struct.py script in this folder
# It will output the necessary uint8_t array to set here
#
STLcdDefaultImage => STLcdDefaultImage_define;
# Only the data portion is required
# Must be on a single line
Using multi-line define support (requires latest kll compiler)
2015-08-02 20:43:28 +00:00
STLcdDefaultImage = "
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
";
Adding capability to set default image on LCD
2015-08-02 06:13:19 +00:00
Adding basic support for LCDLayerDisplay using capabilities - Requires lcdFuncMap.kll instead of stdFuncMap.kll
2015-08-18 08:10:44 +00:00
# Layer Status Display
Adding basic remote capabilities + UART Rx DMA buffers - Rx buffers weren't fast enough, had to use DMA :D - Basic LCD remote capabilities are working, single node - Multi-node broadcast seems to have a bug still - DMA ring buffer allowed for significant processing simplification * There is an overrun risk, but the buffer is large and generally there isn't too much data being sent (just very quickly) - Split out LCD layer stack capability into itself and an "exact" version used for updating remote nodes
2015-10-15 07:16:36 +00:00
LCDLayerDisplay => LCD_layerStack_capability();
LCDLayerDisplayExact => LCD_layerStackExact_capability( display : 1, stack1 : 2, stack2 : 2, stack3 : 2, stack4 : 2 );
Adding basic support for LCDLayerDisplay using capabilities - Requires lcdFuncMap.kll instead of stdFuncMap.kll
2015-08-18 08:10:44 +00:00
# LCD Module Enabled
LCDEnabled => LCDEnabled_define;
LCDEnabled = 1;
Copy Permalink