|
12345678910111213141516171819202122232425262728293031 |
- Name = UARTConnectCapabilities;
- Version = 0.1;
- Author = "HaaTa (Jacob Alexander) 2015";
- KLL = 0.3a;
-
- # Modified Date
- Date = 2015-03-15;
-
- # UART Buffer Size
- # Number of bytes to reserve for each side of UARTConnect
- # For true NKRO support must be at least: <# of Keys> x 3 + 5
- UARTConnectBufSize => UARTConnectBufSize_define;
- UARTConnectBufSize = 128; # MDErgo1 requires at least a 119 byte buffer
-
- # UART Speed
- # *NOTE* This must be changed on every device in the chain or else UARTConnect will not work
- # The faster the speed, the lower the latency, but higher chance for an error
- UARTConnectBaud => UARTConnectBaud_define;
- UARTConnectBaudFine => UARTConnectBaudFine_define;
- # Generally, leave BaudFine at zero unless trying to tune the link to an external UART
- # You'll want to look at the specific chip datasheet for the exact equation
- #
- # Example of 115200 Baud using a 48 MHz clock (mk20dx128vlf5)
- # 48 MHz / ( 16 * Baud ) = BDH/L
- # Baud: 115200 -> 48 MHz / ( 16 * 115200 ) = 26.0416667
- # Thus baud setting = 26
- # NOTE: If finer baud adjustment is needed see UARTx_C4 -> BRFA in the datasheet
- # Baud fine setting = 0x02
- UARTConnectBaud = 26;
- UARTConnectBaudFine = 0x02;
-
|