controller/Scan/Kaypro1/setup.cmake

###| CMake Kiibohd Controller Scan Module |###
#
# Written by Jacob Alexander in 2011 for the Kiibohd Controller
#
# Released into the Public Domain
#
###


###
# Module C files
#

set( SCAN_SRCS
	scan_loop.c
)


###
# Module Specific Options
#
add_definitions( -I${HEAD_DIR}/Keymap )

#| Keymap Settings
add_definitions(
	-DMODIFIER_MASK=kaypro1_ModifierMask
	#-DKEYINDEX_MASK=kaypro1_ColemakMap
	-DKEYINDEX_MASK=kaypro1_DefaultMap
)


###
# Compiler Family Compatibility
#
set( ScanModuleCompatibility
	avr
)
Initial commit of the Kaypro1 scan module - Does not output to usb yet - USART is functionally getting characters from the keyboard and sending beep codes and ACK request code (Baud rate properly calculated) - Uses hard-coded keys for the PC to Keyboard commands (not desireable) - Keyboard sends ASCII data, which makes doing things like holding multiple keys almost impossible to detect (the board isn't NKRO anyways, though I've found 8+ key combos that work) 2011-11-01 07:02:10 +00:00			`###\| CMake Kiibohd Controller Scan Module \|###`
			`#`
			`# Written by Jacob Alexander in 2011 for the Kiibohd Controller`
			`#`
			`# Released into the Public Domain`
			`#`
			`###`


			`###`
			`# Module C files`
			`#`

			`set( SCAN_SRCS`
			`scan_loop.c`
			`)`


			`###`
			`# Module Specific Options`
			`#`
			`add_definitions( -I${HEAD_DIR}/Keymap )`

			`#\| Keymap Settings`
			`add_definitions(`
Adding Kaypro1 functional support - Uses USART instead of polling - Supports two way communication (only 3 commands to the keyboard though) - Kaypro sends data as ASCII, which severely limits the handling of modifiers - No release signal is sent, so even faking modifiers is next to impossible outside of Shift and Ctrl - Includes default QWERTY and Colemak layouts - Developed a new buffer macro, which will become the basic macro module once all the other modules have been ported (much more efficient, as it keeps serial scanning schemes serial, and parallel scanning schemes such as matrix, that already serialized into a sort of buffer for the debouncing evaluation) - This module is quite efficient, and would be able to handle very excessive macro processing in the future. - If more of the keypboard communication protocol is desired, I have a rom dump of the microcontroller (M5L8049) 2011-11-03 07:09:10 +00:00			`-DMODIFIER_MASK=kaypro1_ModifierMask`
Small Kaypro update 2011-11-13 10:09:04 +00:00			`#-DKEYINDEX_MASK=kaypro1_ColemakMap`
			`-DKEYINDEX_MASK=kaypro1_DefaultMap`
Initial commit of the Kaypro1 scan module - Does not output to usb yet - USART is functionally getting characters from the keyboard and sending beep codes and ACK request code (Baud rate properly calculated) - Uses hard-coded keys for the PC to Keyboard commands (not desireable) - Keyboard sends ASCII data, which makes doing things like holding multiple keys almost impossible to detect (the board isn't NKRO anyways, though I've found 8+ key combos that work) 2011-11-01 07:02:10 +00:00			`)`

Adding module compatibility check to CMake build scripts. - All modules have a default avr compatibilty right now (since that is what they were developed on) - As modules get tested and added, arm support has to be turned on in the respective setup.cmake file 2013-01-30 23:13:49 +00:00
			`###`
			`# Compiler Family Compatibility`
			`#`
			`set( ScanModuleCompatibility`
			`avr`
			`)`