controller/Output/pjrcUSB/arm/usb_desc.h

/* Teensyduino Core Library
 * http://www.pjrc.com/teensy/
 * Copyright (c) 2013 PJRC.COM, LLC.
 * Modified by Jacob Alexander (2013-2014)
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * 1. The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * 2. If the Software is incorporated into a build system that allows
 * selection among a list of target devices, then similar target
 * devices manufactured by PJRC.COM must be included in the list of
 * target devices and selectable in the same manner.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#ifndef _usb_desc_h_
#define _usb_desc_h_

// This header is NOT meant to be included when compiling
// user sketches in Arduino.  The low-level functions
// provided by usb_dev.c are meant to be called only by
// code which provides higher-level interfaces to the user.

#include <stdint.h>
#include <stddef.h>
#include "output_com.h"

#define ENDPOINT_UNUSED			0x00
#define ENDPOINT_TRANSIMIT_ONLY		0x15
#define ENDPOINT_RECEIVE_ONLY		0x19
#define ENDPOINT_TRANSMIT_AND_RECEIVE	0x1D

/*
To modify a USB Type to have different interfaces, start in this
file.  Delete the XYZ_INTERFACE lines for any interfaces you
wish to remove, and copy them from another USB Type for any you
want to add.

Give each interface a unique number, and edit NUM_INTERFACE to
reflect the number of interfaces.

Within each interface, make sure it uses a unique set of endpoints.
Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured
the proper way (transmit, receive, or both).

The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be
edited to the correct sizes.  See usb_desc.c for the giant array
of bytes.  Someday these may be done automatically..... (but how?)

If you are using existing interfaces, the code in each file should
automatically adapt to the changes you specify.  If you need to
create a new type of interface, you'll need to write the code which
sends and receives packets, and presents an API to the user.

Finally, edit usb_inst.cpp, which creats instances of the C++
objects for each combination.

Some operating systems, especially Windows, may cache USB device
info.  Changes to the device name may not update on the same
computer unless the vendor or product ID numbers change, or the
"bcdDevice" revision code is increased.

If these instructions are missing steps or could be improved, please
let me know?  http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
*/



#define DEVICE_CLASS            0xEF
#define DEVICE_SUBCLASS         0x02
#define DEVICE_PROTOCOL         0x01
#define EP0_SIZE                64
#define NUM_ENDPOINTS           6
#define NUM_USB_BUFFERS         30
#define NUM_INTERFACE           4

#define CDC_IAD_DESCRIPTOR      1
#define CDC_STATUS_INTERFACE    0
#define CDC_DATA_INTERFACE      1 // Serial
#define CDC_ACM_ENDPOINT        2
#define CDC_RX_ENDPOINT         3
#define CDC_TX_ENDPOINT         4
#define CDC_ACM_SIZE            16
#define CDC_RX_SIZE             64
#define CDC_TX_SIZE             64

#define KEYBOARD_INTERFACE      2 // Keyboard
#define KEYBOARD_ENDPOINT       1
#define KEYBOARD_SIZE           8
#define KEYBOARD_INTERVAL       1

#define MOUSE_INTERFACE         3 // Mouse
#define MOUSE_ENDPOINT          5
#define MOUSE_SIZE              8
#define MOUSE_INTERVAL          2

#define JOYSTICK_INTERFACE      4 // Joystick
#define JOYSTICK_ENDPOINT       6
#define JOYSTICK_SIZE           16
#define JOYSTICK_INTERVAL       1

#define KEYBOARD_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9)
#define MOUSE_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
#define JOYSTICK_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
#define CONFIG_DESC_SIZE	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)

#define ENDPOINT1_CONFIG	ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT2_CONFIG	ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_ONLY
#define ENDPOINT4_CONFIG	ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT5_CONFIG	ENDPOINT_TRANSIMIT_ONLY
#define ENDPOINT6_CONFIG	ENDPOINT_TRANSIMIT_ONLY


// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];

typedef struct {
	uint16_t	wValue;
	uint16_t	wIndex;
	const uint8_t	*addr;
	uint16_t	length;
} usb_descriptor_list_t;

extern const usb_descriptor_list_t usb_descriptor_list[];


#endif