Preparing from initial AVR USB NKRO support.
- Refactored pjrc USB (definitions to the .h file)
This commit is contained in:
Jacob Alexander
parent
111475c86d
commit
8a66563622
@ -43,7 +43,7 @@ include( Lib/CMake/initialize.cmake )
|
|||||||
#| All of the modules must be specified, as they generate the sources list of files to compile
|
#| All of the modules must be specified, as they generate the sources list of files to compile
|
||||||
#| Any modifications to this file will cause a complete rebuild of the project
|
#| Any modifications to this file will cause a complete rebuild of the project
|
||||||
|
|
||||||
#| Please look at the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
|
#| Please look at the {Scan,Macro,Output,Debug} for information on the modules and how to create new ones
|
||||||
|
|
||||||
##| Deals with acquiring the keypress information and turning it into a key index
|
##| Deals with acquiring the keypress information and turning it into a key index
|
||||||
set( ScanModule "DPH" )
|
set( ScanModule "DPH" )
|
||||||
|
|||||||
@ -26,433 +26,109 @@
|
|||||||
#include "usb_keyboard_serial.h"
|
#include "usb_keyboard_serial.h"
|
||||||
|
|
||||||
|
|
||||||
// ----- Functions -----
|
// ----- Variables -----
|
||||||
|
|
||||||
// Set the avr into firmware reload mode
|
|
||||||
void usb_debug_reload()
|
|
||||||
{
|
|
||||||
cli();
|
|
||||||
// Disable watchdog, if enabled
|
|
||||||
// Disable all peripherals
|
|
||||||
|
|
||||||
UDCON = 1;
|
|
||||||
USBCON = (1 << FRZCLK); // Disable USB
|
|
||||||
UCSR1B = 0;
|
|
||||||
_delay_ms( 5 );
|
|
||||||
|
|
||||||
#if defined(__AVR_AT90USB162__) // Teensy 1.0
|
|
||||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
|
|
||||||
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
|
|
||||||
DDRB = 0; DDRC = 0; DDRD = 0;
|
|
||||||
PORTB = 0; PORTC = 0; PORTD = 0;
|
|
||||||
asm volatile("jmp 0x3E00");
|
|
||||||
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
|
|
||||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
|
||||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
|
|
||||||
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
|
|
||||||
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
|
||||||
asm volatile("jmp 0x7E00");
|
|
||||||
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
|
|
||||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
|
||||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
|
||||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
|
||||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
|
||||||
asm volatile("jmp 0xFC00");
|
|
||||||
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
|
|
||||||
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
|
||||||
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
|
||||||
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
|
||||||
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
|
||||||
asm volatile("jmp 0x1FC00");
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
// WDT Setup for software reset the chip
|
|
||||||
void wdt_init(void)
|
|
||||||
{
|
|
||||||
MCUSR = 0;
|
|
||||||
wdt_disable();
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**************************************************************************
|
|
||||||
*
|
|
||||||
* Configurable Options
|
|
||||||
*
|
|
||||||
**************************************************************************/
|
|
||||||
|
|
||||||
// When you write data, it goes into a USB endpoint buffer, which
|
|
||||||
// is transmitted to the PC when it becomes full, or after a timeout
|
|
||||||
// with no more writes. Even if you write in exactly packet-size
|
|
||||||
// increments, this timeout is used to send a "zero length packet"
|
|
||||||
// that tells the PC no more data is expected and it should pass
|
|
||||||
// any buffered data to the application that may be waiting. If
|
|
||||||
// you want data sent immediately, call usb_serial_flush_output().
|
|
||||||
#define TRANSMIT_FLUSH_TIMEOUT 5 /* in milliseconds */
|
|
||||||
|
|
||||||
// If the PC is connected but not "listening", this is the length
|
|
||||||
// of time before usb_serial_getchar() returns with an error. This
|
|
||||||
// is roughly equivilant to a real UART simply transmitting the
|
|
||||||
// bits on a wire where nobody is listening, except you get an error
|
|
||||||
// code which you can ignore for serial-like discard of data, or
|
|
||||||
// use to know your data wasn't sent.
|
|
||||||
#define TRANSMIT_TIMEOUT 25 /* in milliseconds */
|
|
||||||
|
|
||||||
// USB devices are supposed to implment a halt feature, which is
|
|
||||||
// rarely (if ever) used. If you comment this line out, the halt
|
|
||||||
// code will be removed, saving 116 bytes of space (gcc 4.3.0).
|
|
||||||
// This is not strictly USB compliant, but works with all major
|
|
||||||
// operating systems.
|
|
||||||
#define SUPPORT_ENDPOINT_HALT
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/**************************************************************************
|
|
||||||
*
|
|
||||||
* Descriptor Data
|
|
||||||
*
|
|
||||||
**************************************************************************/
|
|
||||||
|
|
||||||
// Descriptors are the data that your computer reads when it auto-detects
|
|
||||||
// this USB device (called "enumeration" in USB lingo). The most commonly
|
|
||||||
// changed items are editable at the top of this file. Changing things
|
|
||||||
// in here should only be done by those who've read chapter 9 of the USB
|
|
||||||
// spec and relevant portions of any USB class specifications!
|
|
||||||
|
|
||||||
|
|
||||||
static const uint8_t PROGMEM device_descriptor[] = {
|
|
||||||
18, // bLength
|
|
||||||
1, // bDescriptorType
|
|
||||||
0x00, 0x02, // bcdUSB
|
|
||||||
0, // bDeviceClass
|
|
||||||
0, // bDeviceSubClass
|
|
||||||
0, // bDeviceProtocol
|
|
||||||
ENDPOINT0_SIZE, // bMaxPacketSize0
|
|
||||||
LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
|
|
||||||
LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
|
|
||||||
0x00, 0x01, // bcdDevice
|
|
||||||
1, // iManufacturer
|
|
||||||
2, // iProduct
|
|
||||||
3, // iSerialNumber
|
|
||||||
1 // bNumConfigurations
|
|
||||||
};
|
|
||||||
|
|
||||||
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
|
|
||||||
static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
|
|
||||||
0x05, 0x01, // Usage Page (Generic Desktop),
|
|
||||||
0x09, 0x06, // Usage (Keyboard),
|
|
||||||
0xA1, 0x01, // Collection (Application),
|
|
||||||
0x75, 0x01, // Report Size (1),
|
|
||||||
0x95, 0x08, // Report Count (8),
|
|
||||||
0x05, 0x07, // Usage Page (Key Codes),
|
|
||||||
0x19, 0xE0, // Usage Minimum (224),
|
|
||||||
0x29, 0xE7, // Usage Maximum (231),
|
|
||||||
0x15, 0x00, // Logical Minimum (0),
|
|
||||||
0x25, 0x01, // Logical Maximum (1),
|
|
||||||
0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
|
|
||||||
0x95, 0x08, // Report Count (8),
|
|
||||||
0x75, 0x01, // Report Size (1),
|
|
||||||
0x15, 0x00, // Logical Minimum (0),
|
|
||||||
0x25, 0x01, // Logical Maximum (1),
|
|
||||||
0x05, 0x0C, // Usage Page (Consumer),
|
|
||||||
0x09, 0xE9, // Usage (Volume Increment),
|
|
||||||
0x09, 0xEA, // Usage (Volume Decrement),
|
|
||||||
0x09, 0xE2, // Usage (Mute),
|
|
||||||
0x09, 0xCD, // Usage (Play/Pause),
|
|
||||||
0x09, 0xB5, // Usage (Scan Next Track),
|
|
||||||
0x09, 0xB6, // Usage (Scan Previous Track),
|
|
||||||
0x09, 0xB7, // Usage (Stop),
|
|
||||||
0x09, 0xB8, // Usage (Eject),
|
|
||||||
0x81, 0x02, // Input (Data, Variable, Absolute), ;Media keys
|
|
||||||
0x95, 0x05, // Report Count (5),
|
|
||||||
0x75, 0x01, // Report Size (1),
|
|
||||||
0x05, 0x08, // Usage Page (LEDs),
|
|
||||||
0x19, 0x01, // Usage Minimum (1),
|
|
||||||
0x29, 0x05, // Usage Maximum (5),
|
|
||||||
0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report
|
|
||||||
0x95, 0x01, // Report Count (1),
|
|
||||||
0x75, 0x03, // Report Size (3),
|
|
||||||
0x91, 0x03, // Output (Constant), ;LED report padding
|
|
||||||
0x95, 0x06, // Report Count (6),
|
|
||||||
0x75, 0x08, // Report Size (8),
|
|
||||||
0x15, 0x00, // Logical Minimum (0),
|
|
||||||
0x25, 0x7F, // Logical Maximum(104),
|
|
||||||
0x05, 0x07, // Usage Page (Key Codes),
|
|
||||||
0x19, 0x00, // Usage Minimum (0),
|
|
||||||
0x29, 0x7F, // Usage Maximum (104),
|
|
||||||
0x81, 0x00, // Input (Data, Array), ;Normal keys
|
|
||||||
0xc0 // End Collection
|
|
||||||
};
|
|
||||||
|
|
||||||
// <Configuration> + <Keyboard HID> + <Serial CDC>
|
|
||||||
#define CONFIG1_DESC_SIZE (9 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7)
|
|
||||||
#define KEYBOARD_HID_DESC_OFFSET (9 + 9)
|
|
||||||
#define SERIAL_CDC_DESC_OFFSET (9 + 9+9+7)
|
|
||||||
static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
|
|
||||||
// --- Configuration ---
|
|
||||||
// - 9 bytes -
|
|
||||||
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
|
|
||||||
9, // bLength;
|
|
||||||
2, // bDescriptorType;
|
|
||||||
LSB(CONFIG1_DESC_SIZE), // wTotalLength
|
|
||||||
MSB(CONFIG1_DESC_SIZE),
|
|
||||||
3, // bNumInterfaces
|
|
||||||
1, // bConfigurationValue
|
|
||||||
0, // iConfiguration
|
|
||||||
0xC0, // bmAttributes
|
|
||||||
50, // bMaxPower
|
|
||||||
|
|
||||||
// --- Keyboard HID ---
|
|
||||||
// - 9 bytes -
|
|
||||||
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
||||||
9, // bLength
|
|
||||||
4, // bDescriptorType
|
|
||||||
KEYBOARD_INTERFACE, // bInterfaceNumber
|
|
||||||
0, // bAlternateSetting
|
|
||||||
1, // bNumEndpoints
|
|
||||||
0x03, // bInterfaceClass (0x03 = HID)
|
|
||||||
0x01, // bInterfaceSubClass (0x01 = Boot)
|
|
||||||
0x01, // bInterfaceProtocol (0x01 = Keyboard)
|
|
||||||
0, // iInterface
|
|
||||||
// - 9 bytes -
|
|
||||||
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
|
||||||
9, // bLength
|
|
||||||
0x21, // bDescriptorType
|
|
||||||
0x11, 0x01, // bcdHID
|
|
||||||
0, // bCountryCode
|
|
||||||
1, // bNumDescriptors
|
|
||||||
0x22, // bDescriptorType
|
|
||||||
LSB(sizeof(keyboard_hid_report_desc)), // wDescriptorLength
|
|
||||||
MSB(sizeof(keyboard_hid_report_desc)),
|
|
||||||
// - 7 bytes -
|
|
||||||
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
||||||
7, // bLength
|
|
||||||
5, // bDescriptorType
|
|
||||||
KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
|
|
||||||
0x03, // bmAttributes (0x03=intr)
|
|
||||||
KEYBOARD_SIZE, 0, // wMaxPacketSize
|
|
||||||
KEYBOARD_INTERVAL, // bInterval
|
|
||||||
|
|
||||||
// --- Serial CDC ---
|
|
||||||
// - 8 bytes -
|
|
||||||
// interface association descriptor, USB ECN, Table 9-Z
|
|
||||||
8, // bLength
|
|
||||||
11, // bDescriptorType
|
|
||||||
CDC_STATUS_INTERFACE, // bFirstInterface
|
|
||||||
2, // bInterfaceCount
|
|
||||||
0x02, // bFunctionClass
|
|
||||||
0x02, // bFunctionSubClass
|
|
||||||
0x01, // bFunctionProtocol
|
|
||||||
4, // iFunction
|
|
||||||
// - 9 bytes -
|
|
||||||
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
||||||
9, // bLength
|
|
||||||
4, // bDescriptorType
|
|
||||||
CDC_STATUS_INTERFACE, // bInterfaceNumber
|
|
||||||
0, // bAlternateSetting
|
|
||||||
1, // bNumEndpoints
|
|
||||||
0x02, // bInterfaceClass
|
|
||||||
0x02, // bInterfaceSubClass
|
|
||||||
0x01, // bInterfaceProtocol
|
|
||||||
0, // iInterface
|
|
||||||
// - 5 bytes -
|
|
||||||
// CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
|
|
||||||
5, // bFunctionLength
|
|
||||||
0x24, // bDescriptorType
|
|
||||||
0x00, // bDescriptorSubtype
|
|
||||||
0x10, 0x01, // bcdCDC
|
|
||||||
// - 5 bytes -
|
|
||||||
// Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
|
|
||||||
5, // bFunctionLength
|
|
||||||
0x24, // bDescriptorType
|
|
||||||
0x01, // bDescriptorSubtype
|
|
||||||
0x01, // bmCapabilities
|
|
||||||
1, // bDataInterface
|
|
||||||
// - 4 bytes -
|
|
||||||
// Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
|
|
||||||
4, // bFunctionLength
|
|
||||||
0x24, // bDescriptorType
|
|
||||||
0x02, // bDescriptorSubtype
|
|
||||||
0x06, // bmCapabilities
|
|
||||||
// - 5 bytes -
|
|
||||||
// Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
|
|
||||||
5, // bFunctionLength
|
|
||||||
0x24, // bDescriptorType
|
|
||||||
0x06, // bDescriptorSubtype
|
|
||||||
CDC_STATUS_INTERFACE, // bMasterInterface
|
|
||||||
CDC_DATA_INTERFACE, // bSlaveInterface0
|
|
||||||
// - 7 bytes -
|
|
||||||
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
||||||
7, // bLength
|
|
||||||
5, // bDescriptorType
|
|
||||||
CDC_ACM_ENDPOINT | 0x80, // bEndpointAddress
|
|
||||||
0x03, // bmAttributes (0x03=intr)
|
|
||||||
CDC_ACM_SIZE, 0, // wMaxPacketSize
|
|
||||||
64, // bInterval
|
|
||||||
// - 9 bytes -
|
|
||||||
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
||||||
9, // bLength
|
|
||||||
4, // bDescriptorType
|
|
||||||
CDC_DATA_INTERFACE, // bInterfaceNumber
|
|
||||||
0, // bAlternateSetting
|
|
||||||
2, // bNumEndpoints
|
|
||||||
0x0A, // bInterfaceClass
|
|
||||||
0x00, // bInterfaceSubClass
|
|
||||||
0x00, // bInterfaceProtocol
|
|
||||||
0, // iInterface
|
|
||||||
// - 7 bytes -
|
|
||||||
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
||||||
7, // bLength
|
|
||||||
5, // bDescriptorType
|
|
||||||
CDC_RX_ENDPOINT, // bEndpointAddress
|
|
||||||
0x02, // bmAttributes (0x02=bulk)
|
|
||||||
CDC_RX_SIZE, 0, // wMaxPacketSize
|
|
||||||
0, // bInterval
|
|
||||||
// - 7 bytes -
|
|
||||||
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
||||||
7, // bLength
|
|
||||||
5, // bDescriptorType
|
|
||||||
CDC_TX_ENDPOINT | 0x80, // bEndpointAddress
|
|
||||||
0x02, // bmAttributes (0x02=bulk)
|
|
||||||
CDC_TX_SIZE, 0, // wMaxPacketSize
|
|
||||||
0, // bInterval
|
|
||||||
};
|
|
||||||
|
|
||||||
// If you're desperate for a little extra code memory, these strings
|
|
||||||
// can be completely removed if iManufacturer, iProduct, iSerialNumber
|
|
||||||
// in the device desciptor are changed to zeros.
|
|
||||||
struct usb_string_descriptor_struct {
|
|
||||||
uint8_t bLength;
|
|
||||||
uint8_t bDescriptorType;
|
|
||||||
int16_t wString[];
|
|
||||||
};
|
|
||||||
static const struct usb_string_descriptor_struct PROGMEM string0 = {
|
|
||||||
4,
|
|
||||||
3,
|
|
||||||
{0x0409}
|
|
||||||
};
|
|
||||||
static const struct usb_string_descriptor_struct PROGMEM string1 = {
|
|
||||||
sizeof(STR_MANUFACTURER),
|
|
||||||
3,
|
|
||||||
STR_MANUFACTURER
|
|
||||||
};
|
|
||||||
static const struct usb_string_descriptor_struct PROGMEM string2 = {
|
|
||||||
sizeof(STR_PRODUCT),
|
|
||||||
3,
|
|
||||||
STR_PRODUCT
|
|
||||||
};
|
|
||||||
static const struct usb_string_descriptor_struct PROGMEM string3 = {
|
|
||||||
sizeof(STR_SERIAL),
|
|
||||||
3,
|
|
||||||
STR_SERIAL
|
|
||||||
};
|
|
||||||
|
|
||||||
// This table defines which descriptor data is sent for each specific
|
|
||||||
// request from the host (in wValue and wIndex).
|
|
||||||
static const struct descriptor_list_struct {
|
|
||||||
uint16_t wValue;
|
|
||||||
uint16_t wIndex;
|
|
||||||
const uint8_t *addr;
|
|
||||||
uint8_t length;
|
|
||||||
} PROGMEM descriptor_list[] = {
|
|
||||||
{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
|
|
||||||
{0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
|
|
||||||
{0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
|
|
||||||
{0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9},
|
|
||||||
{0x0300, 0x0000, (const uint8_t *)&string0, 4},
|
|
||||||
{0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
|
|
||||||
{0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)},
|
|
||||||
{0x0303, 0x0409, (const uint8_t *)&string3, sizeof(STR_SERIAL)}
|
|
||||||
};
|
|
||||||
#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
|
|
||||||
|
|
||||||
|
|
||||||
/**************************************************************************
|
|
||||||
*
|
|
||||||
* Variables - these are the only non-stack RAM usage
|
|
||||||
*
|
|
||||||
**************************************************************************/
|
|
||||||
|
|
||||||
// zero when we are not configured, non-zero when enumerated
|
// zero when we are not configured, non-zero when enumerated
|
||||||
static volatile uint8_t usb_configuration=0;
|
static volatile uint8_t usb_configuration = 0;
|
||||||
|
|
||||||
// the time remaining before we transmit any partially full
|
// the time remaining before we transmit any partially full
|
||||||
// packet, or send a zero length packet.
|
// packet, or send a zero length packet.
|
||||||
static volatile uint8_t transmit_flush_timer=0;
|
static volatile uint8_t transmit_flush_timer = 0;
|
||||||
static uint8_t transmit_previous_timeout=0;
|
static uint8_t transmit_previous_timeout = 0;
|
||||||
|
|
||||||
// serial port settings (baud rate, control signals, etc) set
|
// serial port settings (baud rate, control signals, etc) set
|
||||||
// by the PC. These are ignored, but kept in RAM.
|
// by the PC. These are ignored, but kept in RAM.
|
||||||
static uint8_t cdc_line_coding[7]={0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08};
|
static uint8_t cdc_line_coding[7] = {0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08};
|
||||||
static uint8_t cdc_line_rtsdtr=0;
|
static uint8_t cdc_line_rtsdtr = 0;
|
||||||
|
|
||||||
|
|
||||||
/**************************************************************************
|
|
||||||
*
|
|
||||||
* Public Functions - these are the API intended for the user
|
|
||||||
*
|
|
||||||
**************************************************************************/
|
|
||||||
|
|
||||||
|
// ----- USB Keyboard Functions -----
|
||||||
|
|
||||||
// initialize USB
|
// Sends normal keyboard out to host
|
||||||
void usb_init(void)
|
// NOTE: Make sure to match the descriptor
|
||||||
|
void usb_keyboard_toHost()
|
||||||
{
|
{
|
||||||
HW_CONFIG();
|
uint8_t i;
|
||||||
USB_FREEZE(); // enable USB
|
|
||||||
PLL_CONFIG(); // config PLL
|
|
||||||
while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
|
|
||||||
USB_CONFIG(); // start USB clock
|
|
||||||
UDCON = 0; // enable attach resistor
|
|
||||||
usb_configuration = 0;
|
|
||||||
UDIEN = (1<<EORSTE)|(1<<SOFE);
|
|
||||||
sei();
|
|
||||||
|
|
||||||
// Disable watchdog timer after possible software reset
|
// Modifiers
|
||||||
//wdt_init(); // XXX Not working...seems to be ok without this, not sure though
|
|
||||||
}
|
|
||||||
|
|
||||||
// return 0 if the USB is not configured, or the configuration
|
|
||||||
// number selected by the HOST
|
|
||||||
uint8_t usb_configured(void)
|
|
||||||
{
|
|
||||||
return usb_configuration;
|
|
||||||
}
|
|
||||||
|
|
||||||
// send the contents of USBKeys_Array and USBKeys_Modifiers
|
|
||||||
int8_t usb_keyboard_send(void)
|
|
||||||
{
|
|
||||||
uint8_t i, intr_state, timeout;
|
|
||||||
|
|
||||||
if (!usb_configuration) return -1;
|
|
||||||
intr_state = SREG;
|
|
||||||
cli();
|
|
||||||
UENUM = KEYBOARD_ENDPOINT;
|
|
||||||
timeout = UDFNUML + 50;
|
|
||||||
while (1) {
|
|
||||||
// are we ready to transmit?
|
|
||||||
if (UEINTX & (1<<RWAL)) break;
|
|
||||||
SREG = intr_state;
|
|
||||||
// has the USB gone offline?
|
|
||||||
if (!usb_configuration) return -1;
|
|
||||||
// have we waited too long?
|
|
||||||
if (UDFNUML == timeout) return -1;
|
|
||||||
// get ready to try checking again
|
|
||||||
intr_state = SREG;
|
|
||||||
cli();
|
|
||||||
UENUM = KEYBOARD_ENDPOINT;
|
|
||||||
}
|
|
||||||
UEDATX = USBKeys_Modifiers;
|
UEDATX = USBKeys_Modifiers;
|
||||||
UEDATX = 0;
|
|
||||||
for (i=0; i<6; i++) {
|
// Normal Keys
|
||||||
|
for ( i = 0; i < 6; i++)
|
||||||
|
{
|
||||||
UEDATX = USBKeys_Array[i];
|
UEDATX = USBKeys_Array[i];
|
||||||
}
|
}
|
||||||
UEINTX = 0x3A;
|
UEINTX = 0x3A;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Sends NKRO keyboard out to host
|
||||||
|
// NOTE: Make sure to match the descriptor
|
||||||
|
void usb_nkrokeyboard_toHost()
|
||||||
|
{
|
||||||
|
uint8_t i;
|
||||||
|
|
||||||
|
// Modifiers
|
||||||
|
/*
|
||||||
|
UEDATX = 0x02;
|
||||||
|
UEDATX = USBKeys_Modifiers;
|
||||||
|
UEINTX = 0x3A;
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Media Keys
|
||||||
|
UEDATX = 0x03;
|
||||||
|
UEDATX = 0;
|
||||||
|
UEINTX = 0x3A;
|
||||||
|
|
||||||
|
// Normal Keys
|
||||||
|
UEDATX = 0x04;
|
||||||
|
for ( i = 0; i < 6; i++)
|
||||||
|
{
|
||||||
|
UEDATX = USBKeys_Array[i];
|
||||||
|
}
|
||||||
|
UEINTX = 0x3A;
|
||||||
|
}
|
||||||
|
|
||||||
|
// send the contents of USBKeys_Array and USBKeys_Modifiers
|
||||||
|
int8_t usb_keyboard_send()
|
||||||
|
{
|
||||||
|
uint8_t intr_state, timeout;
|
||||||
|
|
||||||
|
intr_state = SREG;
|
||||||
|
timeout = UDFNUML + 50;
|
||||||
|
|
||||||
|
// Ready to transmit keypresses?
|
||||||
|
do
|
||||||
|
{
|
||||||
|
SREG = intr_state;
|
||||||
|
|
||||||
|
// has the USB gone offline? or exceeded timeout?
|
||||||
|
if ( !usb_configuration || UDFNUML == timeout )
|
||||||
|
return -1;
|
||||||
|
|
||||||
|
// get ready to try checking again
|
||||||
|
intr_state = SREG;
|
||||||
|
cli();
|
||||||
|
|
||||||
|
// If not using Boot protocol, send NKRO
|
||||||
|
UENUM = USBKeys_Protocol ? KEYBOARD_NKRO_ENDPOINT : KEYBOARD_ENDPOINT;
|
||||||
|
} while ( !( UEINTX & (1 << RWAL) ) );
|
||||||
|
|
||||||
|
// Send normal keyboard interrupt packet(s)
|
||||||
|
switch ( USBKeys_Protocol )
|
||||||
|
{
|
||||||
|
}
|
||||||
|
usb_keyboard_toHost();
|
||||||
|
|
||||||
USBKeys_Idle_Count = 0;
|
USBKeys_Idle_Count = 0;
|
||||||
SREG = intr_state;
|
SREG = intr_state;
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ----- USB Virtual Serial Port (CDC) Functions -----
|
||||||
|
|
||||||
// get the next character, or -1 if nothing received
|
// get the next character, or -1 if nothing received
|
||||||
int16_t usb_serial_getchar(void)
|
int16_t usb_serial_getchar(void)
|
||||||
{
|
{
|
||||||
@ -827,55 +503,121 @@ int8_t usb_serial_set_control(uint8_t signals)
|
|||||||
|
|
||||||
|
|
||||||
|
|
||||||
/**************************************************************************
|
// ----- General USB Functions -----
|
||||||
*
|
|
||||||
* Private Functions - not intended for general user consumption....
|
// Set the avr into firmware reload mode
|
||||||
*
|
void usb_debug_reload()
|
||||||
**************************************************************************/
|
{
|
||||||
|
cli();
|
||||||
|
// Disable watchdog, if enabled
|
||||||
|
// Disable all peripherals
|
||||||
|
|
||||||
|
UDCON = 1;
|
||||||
|
USBCON = (1 << FRZCLK); // Disable USB
|
||||||
|
UCSR1B = 0;
|
||||||
|
_delay_ms( 5 );
|
||||||
|
|
||||||
|
#if defined(__AVR_AT90USB162__) // Teensy 1.0
|
||||||
|
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
|
||||||
|
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
|
||||||
|
DDRB = 0; DDRC = 0; DDRD = 0;
|
||||||
|
PORTB = 0; PORTC = 0; PORTD = 0;
|
||||||
|
asm volatile("jmp 0x3E00");
|
||||||
|
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
|
||||||
|
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||||
|
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
|
||||||
|
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
|
||||||
|
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||||
|
asm volatile("jmp 0x7E00");
|
||||||
|
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
|
||||||
|
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||||
|
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
||||||
|
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
||||||
|
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||||
|
asm volatile("jmp 0xFC00");
|
||||||
|
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
|
||||||
|
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
|
||||||
|
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
|
||||||
|
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
|
||||||
|
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
|
||||||
|
asm volatile("jmp 0x1FC00");
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// WDT Setup for software reset the chip
|
||||||
|
void wdt_init(void)
|
||||||
|
{
|
||||||
|
MCUSR = 0;
|
||||||
|
wdt_disable();
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// initialize USB
|
||||||
|
void usb_init(void)
|
||||||
|
{
|
||||||
|
HW_CONFIG();
|
||||||
|
USB_FREEZE(); // enable USB
|
||||||
|
PLL_CONFIG(); // config PLL
|
||||||
|
while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
|
||||||
|
USB_CONFIG(); // start USB clock
|
||||||
|
UDCON = 0; // enable attach resistor
|
||||||
|
usb_configuration = 0;
|
||||||
|
UDIEN = (1<<EORSTE) | (1<<SOFE);
|
||||||
|
sei();
|
||||||
|
|
||||||
|
// Disable watchdog timer after possible software reset
|
||||||
|
//wdt_init(); // XXX Not working...seems to be ok without this, not sure though
|
||||||
|
}
|
||||||
|
|
||||||
|
// return 0 if the USB is not configured, or the configuration
|
||||||
|
// number selected by the HOST
|
||||||
|
uint8_t usb_configured()
|
||||||
|
{
|
||||||
|
return usb_configuration;
|
||||||
|
}
|
||||||
|
|
||||||
// USB Device Interrupt - handle all device-level events
|
// USB Device Interrupt - handle all device-level events
|
||||||
// the transmit buffer flushing is triggered by the start of frame
|
// the transmit buffer flushing is triggered by the start of frame
|
||||||
//
|
//
|
||||||
ISR(USB_GEN_vect)
|
ISR( USB_GEN_vect )
|
||||||
{
|
{
|
||||||
uint8_t intbits, t_cdc, i;
|
uint8_t intbits, t_cdc;
|
||||||
static uint8_t div4=0;
|
|
||||||
|
|
||||||
intbits = UDINT;
|
intbits = UDINT;
|
||||||
UDINT = 0;
|
UDINT = 0;
|
||||||
if (intbits & (1<<EORSTI)) {
|
if ( intbits & (1 << EORSTI) )
|
||||||
|
{
|
||||||
UENUM = 0;
|
UENUM = 0;
|
||||||
UECONX = 1;
|
UECONX = 1;
|
||||||
UECFG0X = EP_TYPE_CONTROL;
|
UECFG0X = EP_TYPE_CONTROL;
|
||||||
UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
|
UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
|
||||||
UEIENX = (1<<RXSTPE);
|
UEIENX = (1 << RXSTPE);
|
||||||
usb_configuration = 0;
|
usb_configuration = 0;
|
||||||
cdc_line_rtsdtr = 0;
|
cdc_line_rtsdtr = 0;
|
||||||
}
|
}
|
||||||
if ((intbits & (1<<SOFI)) && usb_configuration) {
|
if ( (intbits & (1 << SOFI)) && usb_configuration )
|
||||||
|
{
|
||||||
t_cdc = transmit_flush_timer;
|
t_cdc = transmit_flush_timer;
|
||||||
if (t_cdc) {
|
if ( t_cdc )
|
||||||
|
{
|
||||||
transmit_flush_timer = --t_cdc;
|
transmit_flush_timer = --t_cdc;
|
||||||
if (!t_cdc) {
|
if ( !t_cdc )
|
||||||
|
{
|
||||||
UENUM = CDC_TX_ENDPOINT;
|
UENUM = CDC_TX_ENDPOINT;
|
||||||
UEINTX = 0x3A;
|
UEINTX = 0x3A;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
if (USBKeys_Idle_Config && (++div4 & 3) == 0) {
|
static uint8_t div4 = 0;
|
||||||
UENUM = KEYBOARD_ENDPOINT;
|
if ( USBKeys_Idle_Config && (++div4 & 3) == 0 )
|
||||||
if (UEINTX & (1<<RWAL)) {
|
{
|
||||||
USBKeys_Idle_Count++;
|
USBKeys_Idle_Count++;
|
||||||
if (USBKeys_Idle_Count == USBKeys_Idle_Config) {
|
if ( USBKeys_Idle_Count == USBKeys_Idle_Config )
|
||||||
USBKeys_Idle_Count = 0;
|
{
|
||||||
UEDATX = USBKeys_Modifiers;
|
// XXX TODO Is this even used? If so, when? -Jacob
|
||||||
UEDATX = 0;
|
// From hasu's code, this section looks like it could fix the Mac SET_IDLE problem
|
||||||
for (i=0; i<6; i++) {
|
// Send normal keyboard interrupt packet(s)
|
||||||
UEDATX = USBKeys_Array[i];
|
//usb_keyboard_toHost();
|
||||||
}
|
|
||||||
UEINTX = 0x3A;
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -935,22 +677,28 @@ ISR(USB_COM_vect)
|
|||||||
wLength = UEDATX;
|
wLength = UEDATX;
|
||||||
wLength |= (UEDATX << 8);
|
wLength |= (UEDATX << 8);
|
||||||
UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
|
UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
|
||||||
if (bRequest == GET_DESCRIPTOR) {
|
|
||||||
|
if ( bRequest == GET_DESCRIPTOR )
|
||||||
|
{
|
||||||
list = (const uint8_t *)descriptor_list;
|
list = (const uint8_t *)descriptor_list;
|
||||||
for (i=0; ; i++) {
|
for ( i = 0; ; i++ )
|
||||||
if (i >= NUM_DESC_LIST) {
|
{
|
||||||
UECONX = (1<<STALLRQ)|(1<<EPEN); //stall
|
if ( i >= NUM_DESC_LIST )
|
||||||
|
{
|
||||||
|
UECONX = (1 << STALLRQ) | (1 << EPEN); //stall
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
desc_val = pgm_read_word(list);
|
desc_val = pgm_read_word(list);
|
||||||
if (desc_val != wValue) {
|
if ( desc_val != wValue )
|
||||||
list += sizeof(struct descriptor_list_struct);
|
{
|
||||||
|
list += sizeof( struct descriptor_list_struct );
|
||||||
continue;
|
continue;
|
||||||
}
|
}
|
||||||
list += 2;
|
list += 2;
|
||||||
desc_val = pgm_read_word(list);
|
desc_val = pgm_read_word(list);
|
||||||
if (desc_val != wIndex) {
|
if ( desc_val != wIndex )
|
||||||
list += sizeof(struct descriptor_list_struct)-2;
|
{
|
||||||
|
list += sizeof(struct descriptor_list_struct) - 2;
|
||||||
continue;
|
continue;
|
||||||
}
|
}
|
||||||
list += 2;
|
list += 2;
|
||||||
@ -977,31 +725,38 @@ ISR(USB_COM_vect)
|
|||||||
} while (len || n == ENDPOINT0_SIZE);
|
} while (len || n == ENDPOINT0_SIZE);
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (bRequest == SET_ADDRESS) {
|
if (bRequest == SET_ADDRESS) {
|
||||||
usb_send_in();
|
usb_send_in();
|
||||||
usb_wait_in_ready();
|
usb_wait_in_ready();
|
||||||
UDADDR = wValue | (1<<ADDEN);
|
UDADDR = wValue | (1<<ADDEN);
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
|
|
||||||
|
if ( bRequest == SET_CONFIGURATION && bmRequestType == 0 )
|
||||||
|
{
|
||||||
usb_configuration = wValue;
|
usb_configuration = wValue;
|
||||||
cdc_line_rtsdtr = 0;
|
cdc_line_rtsdtr = 0;
|
||||||
transmit_flush_timer = 0;
|
transmit_flush_timer = 0;
|
||||||
usb_send_in();
|
usb_send_in();
|
||||||
cfg = endpoint_config_table;
|
cfg = endpoint_config_table;
|
||||||
for (i=1; i<6; i++) { // 4+1 of 7 endpoints are used // XXX Important to change if more endpoints are used
|
// Setup each of the 6 additional endpoints (0th already configured)
|
||||||
|
for ( i = 1; i < 6; i++ )
|
||||||
|
{
|
||||||
UENUM = i;
|
UENUM = i;
|
||||||
en = pgm_read_byte(cfg++);
|
en = pgm_read_byte(cfg++);
|
||||||
UECONX = en;
|
UECONX = en;
|
||||||
if (en) {
|
if (en)
|
||||||
|
{
|
||||||
UECFG0X = pgm_read_byte(cfg++);
|
UECFG0X = pgm_read_byte(cfg++);
|
||||||
UECFG1X = pgm_read_byte(cfg++);
|
UECFG1X = pgm_read_byte(cfg++);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
UERST = 0x1E;
|
UERST = 0x7E;
|
||||||
UERST = 0;
|
UERST = 0;
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
|
if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
|
||||||
usb_wait_in_ready();
|
usb_wait_in_ready();
|
||||||
UEDATX = usb_configuration;
|
UEDATX = usb_configuration;
|
||||||
@ -1009,6 +764,66 @@ ISR(USB_COM_vect)
|
|||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
//if ( wIndex == KEYBOARD_INTERFACE )
|
||||||
|
if ( wIndex == KEYBOARD_INTERFACE || wIndex == KEYBOARD_NKRO_INTERFACE )
|
||||||
|
{
|
||||||
|
if ( bmRequestType == 0xA1)
|
||||||
|
{
|
||||||
|
if ( bRequest == HID_GET_REPORT )
|
||||||
|
{
|
||||||
|
usb_wait_in_ready();
|
||||||
|
|
||||||
|
// XXX TODO Is this even used? If so, when? -Jacob
|
||||||
|
// Send normal keyboard interrupt packet(s)
|
||||||
|
//usb_keyboard_toHost();
|
||||||
|
|
||||||
|
usb_send_in();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if ( bRequest == HID_GET_IDLE )
|
||||||
|
{
|
||||||
|
usb_wait_in_ready();
|
||||||
|
UEDATX = USBKeys_Idle_Config;
|
||||||
|
usb_send_in();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if ( bRequest == HID_GET_PROTOCOL )
|
||||||
|
{
|
||||||
|
usb_wait_in_ready();
|
||||||
|
UEDATX = USBKeys_Protocol;
|
||||||
|
usb_send_in();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
USBKeys_Protocol = bRequest;
|
||||||
|
}
|
||||||
|
if ( bmRequestType == 0x21 )
|
||||||
|
{
|
||||||
|
if ( bRequest == HID_SET_REPORT )
|
||||||
|
{
|
||||||
|
usb_wait_receive_out();
|
||||||
|
USBKeys_LEDs = UEDATX;
|
||||||
|
usb_ack_out();
|
||||||
|
usb_send_in();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if ( bRequest == HID_SET_IDLE )
|
||||||
|
{
|
||||||
|
USBKeys_Idle_Config = (wValue >> 8);
|
||||||
|
USBKeys_Idle_Count = 0;
|
||||||
|
//usb_wait_in_ready();
|
||||||
|
usb_send_in();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if ( bRequest == HID_SET_PROTOCOL )
|
||||||
|
{
|
||||||
|
USBKeys_Protocol = wValue; // 0 - Boot Mode, 1 - NKRO Mode
|
||||||
|
//usb_wait_in_ready();
|
||||||
|
usb_send_in();
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
if (bRequest == CDC_GET_LINE_CODING && bmRequestType == 0xA1) {
|
if (bRequest == CDC_GET_LINE_CODING && bmRequestType == 0xA1) {
|
||||||
usb_wait_in_ready();
|
usb_wait_in_ready();
|
||||||
p = cdc_line_coding;
|
p = cdc_line_coding;
|
||||||
@ -1040,20 +855,17 @@ ISR(USB_COM_vect)
|
|||||||
if (bRequest == GET_STATUS) {
|
if (bRequest == GET_STATUS) {
|
||||||
usb_wait_in_ready();
|
usb_wait_in_ready();
|
||||||
i = 0;
|
i = 0;
|
||||||
#ifdef SUPPORT_ENDPOINT_HALT
|
|
||||||
if (bmRequestType == 0x82) {
|
if (bmRequestType == 0x82) {
|
||||||
UENUM = wIndex;
|
UENUM = wIndex;
|
||||||
if (UECONX & (1<<STALLRQ)) i = 1;
|
if (UECONX & (1<<STALLRQ)) i = 1;
|
||||||
UENUM = 0;
|
UENUM = 0;
|
||||||
}
|
}
|
||||||
#endif
|
|
||||||
UEDATX = i;
|
UEDATX = i;
|
||||||
UEDATX = 0;
|
UEDATX = 0;
|
||||||
usb_send_in();
|
usb_send_in();
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef SUPPORT_ENDPOINT_HALT
|
|
||||||
if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
|
if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
|
||||||
&& bmRequestType == 0x02 && wValue == 0) {
|
&& bmRequestType == 0x02 && wValue == 0) {
|
||||||
i = wIndex & 0x7F;
|
i = wIndex & 0x7F;
|
||||||
@ -1070,57 +882,7 @@ ISR(USB_COM_vect)
|
|||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
#endif
|
|
||||||
|
|
||||||
if (wIndex == KEYBOARD_INTERFACE) {
|
|
||||||
if (bmRequestType == 0xA1) {
|
|
||||||
if (bRequest == HID_GET_REPORT) {
|
|
||||||
usb_wait_in_ready();
|
|
||||||
UEDATX = USBKeys_Modifiers;
|
|
||||||
UEDATX = 0;
|
|
||||||
for (i=0; i<6; i++) {
|
|
||||||
UEDATX = USBKeys_Array[i];
|
|
||||||
}
|
|
||||||
usb_send_in();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
if (bRequest == HID_GET_IDLE) {
|
|
||||||
usb_wait_in_ready();
|
|
||||||
UEDATX = USBKeys_Idle_Config;
|
|
||||||
usb_send_in();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
if (bRequest == HID_GET_PROTOCOL) {
|
|
||||||
usb_wait_in_ready();
|
|
||||||
UEDATX = USBKeys_Protocol;
|
|
||||||
usb_send_in();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
if (bmRequestType == 0x21) {
|
|
||||||
if (bRequest == HID_SET_REPORT) {
|
|
||||||
usb_wait_receive_out();
|
|
||||||
USBKeys_LEDs = UEDATX;
|
|
||||||
usb_ack_out();
|
|
||||||
usb_send_in();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
if (bRequest == HID_SET_IDLE) {
|
|
||||||
USBKeys_Idle_Config = (wValue >> 8);
|
|
||||||
USBKeys_Idle_Count = 0;
|
|
||||||
//usb_wait_in_ready();
|
|
||||||
usb_send_in();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
if (bRequest == HID_SET_PROTOCOL) {
|
|
||||||
USBKeys_Protocol = wValue;
|
|
||||||
//usb_wait_in_ready();
|
|
||||||
usb_send_in();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
UECONX = (1<<STALLRQ) | (1<<EPEN); // stall
|
UECONX = (1 << STALLRQ) | (1 << EPEN); // stall
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@ -79,10 +79,13 @@ int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc
|
|||||||
// Software reset the chip
|
// Software reset the chip
|
||||||
#define usb_debug_software_reset() do { wdt_enable( WDTO_15MS ); for(;;); } while(0)
|
#define usb_debug_software_reset() do { wdt_enable( WDTO_15MS ); for(;;); } while(0)
|
||||||
|
|
||||||
#define EP_SIZE(s) ((s) == 64 ? 0x30 : \
|
// See EPSIZE -> UECFG1X - 128 and 256 bytes are for endpoint 1 only
|
||||||
((s) == 32 ? 0x20 : \
|
#define EP_SIZE(s) ((s) == 256 ? 0x50 : \
|
||||||
((s) == 16 ? 0x10 : \
|
((s) == 128 ? 0x40 : \
|
||||||
0x00)))
|
((s) == 64 ? 0x30 : \
|
||||||
|
((s) == 32 ? 0x20 : \
|
||||||
|
((s) == 16 ? 0x10 : \
|
||||||
|
0x00)))))
|
||||||
|
|
||||||
#define LSB(n) (n & 255)
|
#define LSB(n) (n & 255)
|
||||||
#define MSB(n) ((n >> 8) & 255)
|
#define MSB(n) ((n >> 8) & 255)
|
||||||
@ -172,50 +175,453 @@ int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc
|
|||||||
#define CDC_GET_LINE_CODING 0x21
|
#define CDC_GET_LINE_CODING 0x21
|
||||||
#define CDC_SET_CONTROL_LINE_STATE 0x22
|
#define CDC_SET_CONTROL_LINE_STATE 0x22
|
||||||
|
|
||||||
|
// CDC Configuration
|
||||||
|
// When you write data, it goes into a USB endpoint buffer, which
|
||||||
|
// is transmitted to the PC when it becomes full, or after a timeout
|
||||||
|
// with no more writes. Even if you write in exactly packet-size
|
||||||
|
// increments, this timeout is used to send a "zero length packet"
|
||||||
|
// that tells the PC no more data is expected and it should pass
|
||||||
|
// any buffered data to the application that may be waiting. If
|
||||||
|
// you want data sent immediately, call usb_serial_flush_output().
|
||||||
|
#define TRANSMIT_FLUSH_TIMEOUT 5 /* in milliseconds */
|
||||||
|
|
||||||
|
// If the PC is connected but not "listening", this is the length
|
||||||
|
// of time before usb_serial_getchar() returns with an error. This
|
||||||
|
// is roughly equivilant to a real UART simply transmitting the
|
||||||
|
// bits on a wire where nobody is listening, except you get an error
|
||||||
|
// code which you can ignore for serial-like discard of data, or
|
||||||
|
// use to know your data wasn't sent.
|
||||||
|
#define TRANSMIT_TIMEOUT 25 /* in milliseconds */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// ----- Endpoint Configuration -----
|
// ----- Endpoint Configuration -----
|
||||||
|
|
||||||
#define ENDPOINT0_SIZE 32
|
#define ENDPOINT0_SIZE 32
|
||||||
|
|
||||||
#define KEYBOARD_INTERFACE 0
|
#define KEYBOARD_NKRO_INTERFACE 0
|
||||||
#define KEYBOARD_ENDPOINT 2
|
#define KEYBOARD_NKRO_ENDPOINT 1
|
||||||
#define KEYBOARD_SIZE 8
|
#define KEYBOARD_NKRO_SIZE 16
|
||||||
#define KEYBOARD_INTERVAL 1
|
#define KEYBOARD_NKRO_HID_BUFFER EP_DOUBLE_BUFFER
|
||||||
#define KEYBOARD_HID_BUFFER EP_DOUBLE_BUFFER
|
|
||||||
|
|
||||||
#define CDC_IAD_DESCRIPTOR 1
|
#define KEYBOARD_INTERFACE 1
|
||||||
#define CDC_STATUS_INTERFACE 1
|
#define KEYBOARD_ENDPOINT 2
|
||||||
#define CDC_DATA_INTERFACE 2
|
#define KEYBOARD_SIZE 8
|
||||||
#define CDC_ACM_ENDPOINT 3
|
#define KEYBOARD_HID_BUFFER EP_DOUBLE_BUFFER
|
||||||
#define CDC_RX_ENDPOINT 4
|
|
||||||
#define CDC_TX_ENDPOINT 5
|
#define CDC_IAD_DESCRIPTOR 1
|
||||||
|
#define CDC_STATUS_INTERFACE 2
|
||||||
|
#define CDC_DATA_INTERFACE 3
|
||||||
|
#define CDC_ACM_ENDPOINT 3
|
||||||
|
#define CDC_RX_ENDPOINT 4
|
||||||
|
#define CDC_TX_ENDPOINT 5
|
||||||
#if defined(__AVR_AT90USB162__)
|
#if defined(__AVR_AT90USB162__)
|
||||||
#define CDC_ACM_SIZE 16
|
#define CDC_ACM_SIZE 16
|
||||||
#define CDC_ACM_BUFFER EP_SINGLE_BUFFER
|
#define CDC_ACM_BUFFER EP_SINGLE_BUFFER
|
||||||
#define CDC_RX_SIZE 32
|
#define CDC_RX_SIZE 32
|
||||||
#define CDC_RX_BUFFER EP_DOUBLE_BUFFER
|
#define CDC_RX_BUFFER EP_DOUBLE_BUFFER
|
||||||
#define CDC_TX_SIZE 32
|
#define CDC_TX_SIZE 32
|
||||||
#define CDC_TX_BUFFER EP_DOUBLE_BUFFER
|
#define CDC_TX_BUFFER EP_DOUBLE_BUFFER
|
||||||
#else
|
#else
|
||||||
#define CDC_ACM_SIZE 16
|
#define CDC_ACM_SIZE 16
|
||||||
#define CDC_ACM_BUFFER EP_SINGLE_BUFFER
|
#define CDC_ACM_BUFFER EP_SINGLE_BUFFER
|
||||||
#define CDC_RX_SIZE 64
|
#define CDC_RX_SIZE 64
|
||||||
#define CDC_RX_BUFFER EP_DOUBLE_BUFFER
|
#define CDC_RX_BUFFER EP_DOUBLE_BUFFER
|
||||||
#define CDC_TX_SIZE 64
|
#define CDC_TX_SIZE 64
|
||||||
#define CDC_TX_BUFFER EP_DOUBLE_BUFFER
|
#define CDC_TX_BUFFER EP_DOUBLE_BUFFER
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Endpoint 0 is reserved for the control endpoint
|
// Endpoint 0 is reserved for the control endpoint
|
||||||
// Endpoint 1 has a 256 byte buffer
|
// Endpoint 1 has a 256 byte buffer
|
||||||
// Endpoints 2-6 have 64 byte buffers
|
// Endpoints 2-6 have 64 byte buffers
|
||||||
static const uint8_t PROGMEM endpoint_config_table[] = {
|
static const uint8_t PROGMEM endpoint_config_table[] = {
|
||||||
0, // 256 byte
|
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_NKRO_SIZE) | KEYBOARD_NKRO_HID_BUFFER, // 256 byte
|
||||||
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_HID_BUFFER, // 64 byte
|
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_HID_BUFFER, // 64 byte
|
||||||
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(CDC_ACM_SIZE) | CDC_ACM_BUFFER, // 64 byte
|
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(CDC_ACM_SIZE) | CDC_ACM_BUFFER, // 64 byte
|
||||||
1, EP_TYPE_BULK_OUT, EP_SIZE(CDC_RX_SIZE) | CDC_RX_BUFFER, // 64 byte
|
1, EP_TYPE_BULK_OUT, EP_SIZE(CDC_RX_SIZE) | CDC_RX_BUFFER, // 64 byte
|
||||||
1, EP_TYPE_BULK_IN, EP_SIZE(CDC_TX_SIZE) | CDC_TX_BUFFER, // 64 byte
|
1, EP_TYPE_BULK_IN, EP_SIZE(CDC_TX_SIZE) | CDC_TX_BUFFER, // 64 byte
|
||||||
|
0, // 64 byte
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ----- Descriptor Configuration -----
|
||||||
|
|
||||||
|
// Descriptors are the data that your computer reads when it auto-detects
|
||||||
|
// this USB device (called "enumeration" in USB lingo). The most commonly
|
||||||
|
// changed items are editable at the top of this file. Changing things
|
||||||
|
// in here should only be done by those who've read chapter 9 of the USB
|
||||||
|
// spec and relevant portions of any USB class specifications!
|
||||||
|
|
||||||
|
|
||||||
|
static const uint8_t PROGMEM device_descriptor[] = {
|
||||||
|
18, // bLength
|
||||||
|
1, // bDescriptorType
|
||||||
|
0x00, 0x02, // bcdUSB
|
||||||
|
0, // bDeviceClass
|
||||||
|
0, // bDeviceSubClass
|
||||||
|
0, // bDeviceProtocol
|
||||||
|
ENDPOINT0_SIZE, // bMaxPacketSize0
|
||||||
|
LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
|
||||||
|
LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
|
||||||
|
0x00, 0x01, // bcdDevice
|
||||||
|
1, // iManufacturer
|
||||||
|
2, // iProduct
|
||||||
|
3, // iSerialNumber
|
||||||
|
1 // bNumConfigurations
|
||||||
|
};
|
||||||
|
|
||||||
|
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
|
||||||
|
static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
|
||||||
|
// Keyboard Collection
|
||||||
|
0x05, 0x01, // Usage Page (Generic Desktop),
|
||||||
|
0x09, 0x06, // Usage (Keyboard),
|
||||||
|
0xA1, 0x01, // Collection (Application) - Keyboard,
|
||||||
|
|
||||||
|
// Modifier Byte
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x95, 0x08, // Report Count (8),
|
||||||
|
0x05, 0x07, // Usage Page (Key Codes),
|
||||||
|
0x19, 0xE0, // Usage Minimum (224),
|
||||||
|
0x29, 0xE7, // Usage Maximum (231),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x01, // Logical Maximum (1),
|
||||||
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
||||||
|
|
||||||
|
// LED Report
|
||||||
|
0x95, 0x05, // Report Count (5),
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x05, 0x08, // Usage Page (LEDs),
|
||||||
|
0x19, 0x01, // Usage Minimum (1),
|
||||||
|
0x29, 0x05, // Usage Maximum (5),
|
||||||
|
0x91, 0x02, // Output (Data, Variable, Absolute),
|
||||||
|
|
||||||
|
// LED Report Padding
|
||||||
|
0x95, 0x01, // Report Count (1),
|
||||||
|
0x75, 0x03, // Report Size (3),
|
||||||
|
0x91, 0x03, // Output (Constant),
|
||||||
|
|
||||||
|
// Normal Keys
|
||||||
|
0x95, 0x06, // Report Count (6),
|
||||||
|
0x75, 0x08, // Report Size (8),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x7F, // Logical Maximum(104),
|
||||||
|
0x05, 0x07, // Usage Page (Key Codes),
|
||||||
|
0x19, 0x00, // Usage Minimum (0),
|
||||||
|
0x29, 0x7F, // Usage Maximum (104),
|
||||||
|
0x81, 0x00, // Input (Data, Array),
|
||||||
|
0xc0, // End Collection - Keyboard
|
||||||
|
};
|
||||||
|
|
||||||
|
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
|
||||||
|
static const uint8_t PROGMEM keyboard_nkro_hid_report_desc[] = {
|
||||||
|
/*
|
||||||
|
// System Control Collection
|
||||||
|
0x05, 0x01, // Usage Page (Generic Desktop),
|
||||||
|
0x09, 0x80, // Usage (System Control),
|
||||||
|
0xA1, 0x01, // Collection (Application),
|
||||||
|
0x85, 0x01, // Report ID (1),
|
||||||
|
0x95, 0x06, // Report Count (6),
|
||||||
|
0x75, 0x08, // Report Size (8),
|
||||||
|
0x19, 0x81, // Usage Minimum (129),
|
||||||
|
0x29, 0x83, // Usage Maximum (131),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x01, // Logical Maximum (1),
|
||||||
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
||||||
|
0x95, 0x05, // Report Count (5),
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x81, 0x03, // Input (Constant, Data, Variable, Absolute),
|
||||||
|
0xc0, 0x00, // End Collection - System Control
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Keyboard Collection
|
||||||
|
0x05, 0x01, // Usage Page (Generic Desktop),
|
||||||
|
0x09, 0x06, // Usage (Keyboard),
|
||||||
|
0xA1, 0x01, // Collection (Application) - Keyboard,
|
||||||
|
|
||||||
|
// Modifier Byte
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x85, 0x02, // Report ID (2),
|
||||||
|
0x95, 0x08, // Report Count (8),
|
||||||
|
0x05, 0x07, // Usage Page (Key Codes),
|
||||||
|
0x19, 0xE0, // Usage Minimum (224),
|
||||||
|
0x29, 0xE7, // Usage Maximum (231),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x01, // Logical Maximum (1),
|
||||||
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
||||||
|
|
||||||
|
// Media Keys
|
||||||
|
0x95, 0x08, // Report Count (8),
|
||||||
|
0x85, 0x03, // Report ID (3),
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x01, // Logical Maximum (1),
|
||||||
|
0x05, 0x0C, // Usage Page (Consumer),
|
||||||
|
0x09, 0xE9, // Usage (Volume Increment),
|
||||||
|
0x09, 0xEA, // Usage (Volume Decrement),
|
||||||
|
0x09, 0xE2, // Usage (Mute),
|
||||||
|
0x09, 0xCD, // Usage (Play/Pause),
|
||||||
|
0x09, 0xB5, // Usage (Scan Next Track),
|
||||||
|
0x09, 0xB6, // Usage (Scan Previous Track),
|
||||||
|
0x09, 0xB7, // Usage (Stop),
|
||||||
|
0x09, 0xB8, // Usage (Eject),
|
||||||
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
||||||
|
|
||||||
|
// LED Report
|
||||||
|
0x95, 0x05, // Report Count (5),
|
||||||
|
0x85, 0x01, // Report ID (1),
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x05, 0x08, // Usage Page (LEDs),
|
||||||
|
0x19, 0x01, // Usage Minimum (1),
|
||||||
|
0x29, 0x05, // Usage Maximum (5),
|
||||||
|
0x91, 0x02, // Output (Data, Variable, Absolute),
|
||||||
|
|
||||||
|
// LED Report Padding
|
||||||
|
0x95, 0x01, // Report Count (1),
|
||||||
|
0x75, 0x03, // Report Size (3),
|
||||||
|
0x91, 0x03, // Output (Constant),
|
||||||
|
|
||||||
|
/*
|
||||||
|
// Misc Keys
|
||||||
|
0x95, 0x06, // Report Count (6),
|
||||||
|
0x75, 0x01, // Report Size (1),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x7F, // Logical Maximum(104),
|
||||||
|
0x05, 0x07, // Usage Page (Key Codes),
|
||||||
|
0x19, 0x00, // Usage Minimum (0),
|
||||||
|
0x29, 0x7F, // Usage Maximum (104),
|
||||||
|
0x81, 0x00, // Input (Data, Array),
|
||||||
|
*/
|
||||||
|
|
||||||
|
// Normal Keys
|
||||||
|
0x95, 0x06, // Report Count (6),
|
||||||
|
0x85, 0x04, // Report ID (4),
|
||||||
|
0x75, 0x08, // Report Size (8),
|
||||||
|
0x15, 0x00, // Logical Minimum (0),
|
||||||
|
0x25, 0x7F, // Logical Maximum(104),
|
||||||
|
0x05, 0x07, // Usage Page (Key Codes),
|
||||||
|
0x19, 0x00, // Usage Minimum (0),
|
||||||
|
0x29, 0x7F, // Usage Maximum (104),
|
||||||
|
0x81, 0x00, // Input (Data, Array),
|
||||||
|
0xc0, // End Collection - Keyboard
|
||||||
|
};
|
||||||
|
|
||||||
|
// <Configuration> + <Keyboard HID> + <NKRO Keyboard HID> + <Serial CDC>
|
||||||
|
#define CONFIG1_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7)
|
||||||
|
#define KEYBOARD_HID_DESC_OFFSET (9 + 9)
|
||||||
|
#define KEYBOARD_NKRO_HID_DESC_OFFSET (9 + 9+9+7 + 9)
|
||||||
|
#define SERIAL_CDC_DESC_OFFSET (9 + 9+9+7 + 9+9+7)
|
||||||
|
static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
|
||||||
|
// --- Configuration ---
|
||||||
|
// - 9 bytes -
|
||||||
|
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
|
||||||
|
9, // bLength;
|
||||||
|
2, // bDescriptorType;
|
||||||
|
LSB(CONFIG1_DESC_SIZE), // wTotalLength
|
||||||
|
MSB(CONFIG1_DESC_SIZE),
|
||||||
|
4, // bNumInterfaces
|
||||||
|
1, // bConfigurationValue
|
||||||
|
0, // iConfiguration
|
||||||
|
0x80, // bmAttributes
|
||||||
|
250, // bMaxPower
|
||||||
|
|
||||||
|
// --- Keyboard HID ---
|
||||||
|
// - 9 bytes -
|
||||||
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
||||||
|
9, // bLength
|
||||||
|
4, // bDescriptorType
|
||||||
|
KEYBOARD_INTERFACE, // bInterfaceNumber
|
||||||
|
0, // bAlternateSetting
|
||||||
|
1, // bNumEndpoints
|
||||||
|
0x03, // bInterfaceClass (0x03 = HID)
|
||||||
|
0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
|
||||||
|
0x01, // bInterfaceProtocol (0x01 = Keyboard)
|
||||||
|
0, // iInterface
|
||||||
|
// - 9 bytes -
|
||||||
|
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
||||||
|
9, // bLength
|
||||||
|
0x21, // bDescriptorType
|
||||||
|
0x11, 0x01, // bcdHID
|
||||||
|
33, // bCountryCode - Defaulting to US for now. TODO
|
||||||
|
1, // bNumDescriptors
|
||||||
|
0x22, // bDescriptorType
|
||||||
|
LSB(sizeof(keyboard_hid_report_desc)), // wDescriptorLength
|
||||||
|
MSB(sizeof(keyboard_hid_report_desc)),
|
||||||
|
// - 7 bytes -
|
||||||
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||||
|
7, // bLength
|
||||||
|
5, // bDescriptorType
|
||||||
|
KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
|
||||||
|
0x03, // bmAttributes (0x03=intr)
|
||||||
|
KEYBOARD_SIZE, 0, // wMaxPacketSize
|
||||||
|
1, // bInterval
|
||||||
|
|
||||||
|
// --- NKRO Keyboard HID ---
|
||||||
|
// - 9 bytes -
|
||||||
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
||||||
|
9, // bLength
|
||||||
|
4, // bDescriptorType
|
||||||
|
KEYBOARD_NKRO_INTERFACE, // bInterfaceNumber
|
||||||
|
0, // bAlternateSetting
|
||||||
|
1, // bNumEndpoints
|
||||||
|
0x03, // bInterfaceClass (0x03 = HID)
|
||||||
|
0x00, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
|
||||||
|
0x01, // bInterfaceProtocol (0x01 = Keyboard)
|
||||||
|
0, // iInterface
|
||||||
|
// - 9 bytes -
|
||||||
|
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
||||||
|
9, // bLength
|
||||||
|
0x21, // bDescriptorType
|
||||||
|
0x11, 0x01, // bcdHID
|
||||||
|
33, // bCountryCode - Defaulting to US for now. TODO
|
||||||
|
1, // bNumDescriptors
|
||||||
|
0x22, // bDescriptorType
|
||||||
|
// wDescriptorLength
|
||||||
|
LSB(sizeof(keyboard_nkro_hid_report_desc)),
|
||||||
|
MSB(sizeof(keyboard_nkro_hid_report_desc)),
|
||||||
|
// - 7 bytes -
|
||||||
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||||
|
7, // bLength
|
||||||
|
5, // bDescriptorType
|
||||||
|
KEYBOARD_NKRO_ENDPOINT | 0x80, // bEndpointAddress
|
||||||
|
0x03, // bmAttributes (0x03=intr)
|
||||||
|
KEYBOARD_NKRO_SIZE, 0, // wMaxPacketSize
|
||||||
|
1, // bInterval
|
||||||
|
|
||||||
|
// --- Serial CDC ---
|
||||||
|
// - 8 bytes -
|
||||||
|
// interface association descriptor, USB ECN, Table 9-Z
|
||||||
|
8, // bLength
|
||||||
|
11, // bDescriptorType
|
||||||
|
CDC_STATUS_INTERFACE, // bFirstInterface
|
||||||
|
2, // bInterfaceCount
|
||||||
|
0x02, // bFunctionClass
|
||||||
|
0x02, // bFunctionSubClass
|
||||||
|
0x01, // bFunctionProtocol
|
||||||
|
4, // iFunction
|
||||||
|
// - 9 bytes -
|
||||||
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
||||||
|
9, // bLength
|
||||||
|
4, // bDescriptorType
|
||||||
|
CDC_STATUS_INTERFACE, // bInterfaceNumber
|
||||||
|
0, // bAlternateSetting
|
||||||
|
1, // bNumEndpoints
|
||||||
|
0x02, // bInterfaceClass
|
||||||
|
0x02, // bInterfaceSubClass
|
||||||
|
0x01, // bInterfaceProtocol
|
||||||
|
0, // iInterface
|
||||||
|
// - 5 bytes -
|
||||||
|
// CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
|
||||||
|
5, // bFunctionLength
|
||||||
|
0x24, // bDescriptorType
|
||||||
|
0x00, // bDescriptorSubtype
|
||||||
|
0x10, 0x01, // bcdCDC
|
||||||
|
// - 5 bytes -
|
||||||
|
// Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
|
||||||
|
5, // bFunctionLength
|
||||||
|
0x24, // bDescriptorType
|
||||||
|
0x01, // bDescriptorSubtype
|
||||||
|
0x01, // bmCapabilities
|
||||||
|
1, // bDataInterface
|
||||||
|
// - 4 bytes -
|
||||||
|
// Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
|
||||||
|
4, // bFunctionLength
|
||||||
|
0x24, // bDescriptorType
|
||||||
|
0x02, // bDescriptorSubtype
|
||||||
|
0x06, // bmCapabilities
|
||||||
|
// - 5 bytes -
|
||||||
|
// Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
|
||||||
|
5, // bFunctionLength
|
||||||
|
0x24, // bDescriptorType
|
||||||
|
0x06, // bDescriptorSubtype
|
||||||
|
CDC_STATUS_INTERFACE, // bMasterInterface
|
||||||
|
CDC_DATA_INTERFACE, // bSlaveInterface0
|
||||||
|
// - 7 bytes -
|
||||||
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||||
|
7, // bLength
|
||||||
|
5, // bDescriptorType
|
||||||
|
CDC_ACM_ENDPOINT | 0x80, // bEndpointAddress
|
||||||
|
0x03, // bmAttributes (0x03=intr)
|
||||||
|
CDC_ACM_SIZE, 0, // wMaxPacketSize
|
||||||
|
64, // bInterval
|
||||||
|
// - 9 bytes -
|
||||||
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
||||||
|
9, // bLength
|
||||||
|
4, // bDescriptorType
|
||||||
|
CDC_DATA_INTERFACE, // bInterfaceNumber
|
||||||
|
0, // bAlternateSetting
|
||||||
|
2, // bNumEndpoints
|
||||||
|
0x0A, // bInterfaceClass
|
||||||
|
0x00, // bInterfaceSubClass
|
||||||
|
0x00, // bInterfaceProtocol
|
||||||
|
0, // iInterface
|
||||||
|
// - 7 bytes -
|
||||||
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||||
|
7, // bLength
|
||||||
|
5, // bDescriptorType
|
||||||
|
CDC_RX_ENDPOINT, // bEndpointAddress
|
||||||
|
0x02, // bmAttributes (0x02=bulk)
|
||||||
|
CDC_RX_SIZE, 0, // wMaxPacketSize
|
||||||
|
0, // bInterval
|
||||||
|
// - 7 bytes -
|
||||||
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||||
|
7, // bLength
|
||||||
|
5, // bDescriptorType
|
||||||
|
CDC_TX_ENDPOINT | 0x80, // bEndpointAddress
|
||||||
|
0x02, // bmAttributes (0x02=bulk)
|
||||||
|
CDC_TX_SIZE, 0, // wMaxPacketSize
|
||||||
|
0, // bInterval
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
// Configuration Endpoint (0) Descriptor
|
||||||
|
struct usb_string_descriptor_struct {
|
||||||
|
uint8_t bLength;
|
||||||
|
uint8_t bDescriptorType;
|
||||||
|
int16_t wString[];
|
||||||
|
};
|
||||||
|
static const struct usb_string_descriptor_struct PROGMEM string0 = {
|
||||||
|
4,
|
||||||
|
3,
|
||||||
|
{0x0409}
|
||||||
|
};
|
||||||
|
static const struct usb_string_descriptor_struct PROGMEM string1 = {
|
||||||
|
sizeof(STR_MANUFACTURER),
|
||||||
|
3,
|
||||||
|
STR_MANUFACTURER
|
||||||
|
};
|
||||||
|
static const struct usb_string_descriptor_struct PROGMEM string2 = {
|
||||||
|
sizeof(STR_PRODUCT),
|
||||||
|
3,
|
||||||
|
STR_PRODUCT
|
||||||
|
};
|
||||||
|
static const struct usb_string_descriptor_struct PROGMEM string3 = {
|
||||||
|
sizeof(STR_SERIAL),
|
||||||
|
3,
|
||||||
|
STR_SERIAL
|
||||||
|
};
|
||||||
|
|
||||||
|
// This table defines which descriptor data is sent for each specific
|
||||||
|
// request from the host (in wValue and wIndex).
|
||||||
|
static const struct descriptor_list_struct {
|
||||||
|
uint16_t wValue;
|
||||||
|
uint16_t wIndex;
|
||||||
|
const uint8_t *addr;
|
||||||
|
uint8_t length;
|
||||||
|
} PROGMEM descriptor_list[] = {
|
||||||
|
{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
|
||||||
|
{0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
|
||||||
|
{0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
|
||||||
|
{0x2100, KEYBOARD_INTERFACE, config1_descriptor + KEYBOARD_HID_DESC_OFFSET, 9},
|
||||||
|
{0x2200, KEYBOARD_NKRO_INTERFACE, keyboard_nkro_hid_report_desc, sizeof(keyboard_nkro_hid_report_desc)},
|
||||||
|
{0x2100, KEYBOARD_NKRO_INTERFACE, config1_descriptor + KEYBOARD_NKRO_HID_DESC_OFFSET, 9},
|
||||||
|
{0x0300, 0x0000, (const uint8_t *)&string0, 4},
|
||||||
|
{0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
|
||||||
|
{0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)},
|
||||||
|
{0x0303, 0x0409, (const uint8_t *)&string3, sizeof(STR_SERIAL)}
|
||||||
|
};
|
||||||
|
#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
|
||||||
|
|
||||||
|
|
||||||
#endif // usb_keyboard_serial_h__
|
#endif // usb_keyboard_serial_h__
|
||||||
|
|
||||||
|
|||||||
@ -45,23 +45,23 @@
|
|||||||
|
|
||||||
// ----- Function Declarations -----
|
// ----- Function Declarations -----
|
||||||
|
|
||||||
void cliFunc_readLEDs ( char* args );
|
void cliFunc_kbdProtocol( char* args );
|
||||||
void cliFunc_sendKeys ( char* args );
|
void cliFunc_readLEDs ( char* args );
|
||||||
void cliFunc_setKeys ( char* args );
|
void cliFunc_sendKeys ( char* args );
|
||||||
void cliFunc_setLEDs ( char* args );
|
void cliFunc_setKeys ( char* args );
|
||||||
void cliFunc_setMod ( char* args );
|
void cliFunc_setMod ( char* args );
|
||||||
|
|
||||||
|
|
||||||
// ----- Variables -----
|
// ----- Variables -----
|
||||||
|
|
||||||
// Output Module command dictionary
|
// Output Module command dictionary
|
||||||
char* outputCLIDictName = "USB Module Commands (Not all commands fully work yet...)";
|
char* outputCLIDictName = "USB Module Commands";
|
||||||
CLIDictItem outputCLIDict[] = {
|
CLIDictItem outputCLIDict[] = {
|
||||||
{ "readLEDs", "Read LED byte. See \033[35msetLEDs\033[0m.", cliFunc_readLEDs },
|
{ "kbdProtocol", "Keyboard Protocol Mode: 0 - Boot, 1 - OS/NKRO Mode", cliFunc_kbdProtocol },
|
||||||
{ "sendKeys", "Send the prepared list of USB codes and modifier byte.", cliFunc_sendKeys },
|
{ "readLEDs", "Read LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 ScrlLck, 16 Kana, etc.", cliFunc_readLEDs },
|
||||||
{ "setKeys", "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m.", cliFunc_setKeys },
|
{ "sendKeys", "Send the prepared list of USB codes and modifier byte.", cliFunc_sendKeys },
|
||||||
{ "setLEDs", "Set LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 ScrlLck, 16 Kana, etc.", cliFunc_setLEDs },
|
{ "setKeys", "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m.", cliFunc_setKeys },
|
||||||
{ "setMod", "Set the modfier byte:" NL "\t\t1 LCtrl, 2 LShft, 4 LAlt, 8 LGUI, 16 RCtrl, 32 RShft, 64 RAlt, 128 RGUI", cliFunc_setMod },
|
{ "setMod", "Set the modfier byte:" NL "\t\t1 LCtrl, 2 LShft, 4 LAlt, 8 LGUI, 16 RCtrl, 32 RShft, 64 RAlt, 128 RGUI", cliFunc_setMod },
|
||||||
{ 0, 0, 0 } // Null entry for dictionary end
|
{ 0, 0, 0 } // Null entry for dictionary end
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -83,10 +83,10 @@ CLIDictItem outputCLIDict[] = {
|
|||||||
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
|
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
|
||||||
volatile uint8_t USBKeys_LEDs = 0;
|
volatile uint8_t USBKeys_LEDs = 0;
|
||||||
|
|
||||||
// protocol setting from the host. We use exactly the same report
|
// Protocol setting from the host.
|
||||||
// either way, so this variable only stores the setting since we
|
// 0 - Boot Mode (Default, until set by the host)
|
||||||
// are required to be able to report which setting is in use.
|
// 1 - NKRO Mode
|
||||||
uint8_t USBKeys_Protocol = 1;
|
volatile uint8_t USBKeys_Protocol = 1;
|
||||||
|
|
||||||
// the idle configuration, how often we send the report to the
|
// the idle configuration, how often we send the report to the
|
||||||
// host (ms * 4) even when it hasn't changed
|
// host (ms * 4) even when it hasn't changed
|
||||||
@ -201,10 +201,18 @@ inline void Output_softReset()
|
|||||||
|
|
||||||
// ----- CLI Command Functions -----
|
// ----- CLI Command Functions -----
|
||||||
|
|
||||||
|
void cliFunc_kbdProtocol( char* args )
|
||||||
|
{
|
||||||
|
print( NL );
|
||||||
|
info_msg("Keyboard Protocol: ");
|
||||||
|
printInt8( USBKeys_Protocol );
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
void cliFunc_readLEDs( char* args )
|
void cliFunc_readLEDs( char* args )
|
||||||
{
|
{
|
||||||
print( NL );
|
print( NL );
|
||||||
info_msg("LED State: ");
|
info_msg("LED State (This doesn't work yet...): ");
|
||||||
printInt8( USBKeys_LEDs );
|
printInt8( USBKeys_LEDs );
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -245,18 +253,6 @@ void cliFunc_setKeys( char* args )
|
|||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
void cliFunc_setLEDs( char* args )
|
|
||||||
{
|
|
||||||
// Parse number from argument
|
|
||||||
// NOTE: Only first argument is used
|
|
||||||
char* arg1Ptr;
|
|
||||||
char* arg2Ptr;
|
|
||||||
CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
|
|
||||||
|
|
||||||
USBKeys_LEDs = decToInt( arg1Ptr );
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
void cliFunc_setMod( char* args )
|
void cliFunc_setMod( char* args )
|
||||||
{
|
{
|
||||||
// Parse number from argument
|
// Parse number from argument
|
||||||
|
|||||||
@ -49,9 +49,9 @@ extern uint8_t USBKeys_Sent;
|
|||||||
extern volatile uint8_t USBKeys_LEDs;
|
extern volatile uint8_t USBKeys_LEDs;
|
||||||
|
|
||||||
static const uint8_t USBKeys_MaxSize = USB_MAX_KEY_SEND;
|
static const uint8_t USBKeys_MaxSize = USB_MAX_KEY_SEND;
|
||||||
|
extern volatile uint8_t USBKeys_Protocol; // 0 - Boot Mode, 1 - NKRO Mode
|
||||||
|
|
||||||
// Misc variables (XXX Some are only properly utilized using AVR)
|
// Misc variables (XXX Some are only properly utilized using AVR)
|
||||||
extern uint8_t USBKeys_Protocol;
|
|
||||||
extern uint8_t USBKeys_Idle_Config;
|
extern uint8_t USBKeys_Idle_Config;
|
||||||
extern uint8_t USBKeys_Idle_Count;
|
extern uint8_t USBKeys_Idle_Count;
|
||||||
|
|
||||||
|
|||||||
Reference in New Issue
Block a user