di0ib/controller
Archived
1
0
Fork 0
Code Releases Activity

ADC0 is now working on Teensy 3.1.

Browse Source
This commit is contained in:
Jacob Alexander 2014-04-14 23:59:41 -07:00
parent 9fbffb37e6
commit c905bfdebf
1 changed files with 26 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Scan/ADCTest/scan_loop.c
View File

@ -67,8 +67,14 @@ volatile uint8_t KeyIndex_BufferUsed;
// Scan Module command dictionary
char* scanCLIDictName = "ADC Test Module Commands";
CLIDictItem scanCLIDict[] = {
{ "adc", "Read the specified number of values from the ADC.", cliFunc_adc },
{ "adcInit", "Intialize/calibrate ADC. Arg 1 specifies the pin.", cliFunc_adcInit },
#if defined(_mk20dx128_) || defined(_mk20dx256_) // ARM
{ "adc", "Read the specified number of values from the ADC at the given pin: <pin> [# of reads]"
NL "\t\t See \033[35mLib/pin_map.teensy3\033[0m for ADC0 channel number.", cliFunc_adc },
{ "adcInit", "Intialize/calibrate ADC: <ADC Resolution> <Vref> <Hardware averaging samples>"
NL "\t\tADC Resolution -> 8, 10, 12, 16 (bit)"
NL "\t\t Vref -> 0 (1.2 V), 1 (External)"
NL "\t\tHw Avg Samples -> 0 (disabled), 4, 8, 16, 32", cliFunc_adcInit },
#endif
#if defined(_mk20dx256_) // DAC is only supported on Teensy 3.1
{ "dac", "Set DAC output value, from 0 to 4095 (1/4096 Vref to Vref).", cliFunc_dac },
{ "dacVref", "Set DAC Vref. 0 is 1.2V. 1 is 3.3V.", cliFunc_dacVref },
@ -140,11 +146,11 @@ void cliFunc_echo( char* args )
char* arg1Ptr;
char* arg2Ptr = args;
print( NL ); // No \n by default after the command is entered
// Parse args until a \0 is found
while ( 1 )
{
print( NL ); // No \r\n by default after the command is entered
curArgs = arg2Ptr; // Use the previous 2nd arg pointer to separate the next arg from the list
CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
@ -177,7 +183,12 @@ void cliFunc_adc( char* args )
// Number of ADC samples to display
CLI_argumentIsolation( arg2Ptr, &arg1Ptr, &arg2Ptr );
int displayedADC = decToInt( arg1Ptr );
int displayedADC = 1; // Default to 1 read
if ( arg1Ptr ) // If there is an argument, use that instead
{
displayedADC = decToInt( arg1Ptr );
}
// Poll ADC until it gets a value, making sure to serve interrupts on each attempt
while ( displayedADC > 0 )
@ -188,8 +199,15 @@ void cliFunc_adc( char* args )
if ( (ADC0_SC1A & ADC_SC1_COCO) )
{
int result = ADC0_RA;
print( NL );
printInt32( result );
displayedADC--;
// Prepare for another read
if ( displayedADC > 0 )
{
ADC0_SC1A = channel;
}
}
__enable_irq();
@ -297,9 +315,9 @@ void cliFunc_adcInit( char* args )
sum = (sum / 2) | 0x8000;
ADC0_PG = sum;
print( NL );
info_msg("Calibration ADC0_PG (Plus-Side Gain Register) set to: ");
printInt16( sum );
print( NL );
// ADC Minus-Side Gain Register
// XXX I don't think this is necessary when doing single-ended (as opposed to differential) -HaaTa
@ -308,9 +326,9 @@ void cliFunc_adcInit( char* args )
sum = (sum / 2) | 0x8000;
ADC0_MG = sum;
print( NL );
info_msg("Calibration ADC0_MG (Minus-Side Gain Register) set to: ");
printInt16( sum );
print( NL );
__enable_irq(); // Re-enable interrupts
}
#endif