- Media keys tested working on Linux/Windows/Mac (use Consumer control)
- Fixed enumeration delays
- Fixed virtual serial port configuration issues
- Fixed GET_REPORT and SET_REPORT
- Added intial descriptors and endpoints for Mouse and Joystick devices
- Split out the consumer and system control endpoint
- Added more fault debugging messages
- Added interface names to endpoints (visible in Windows Device Manager)
- Added KLL define for keyboard locale

- Adding NL's for fault messages

- Interrupt vector table position fix (affected everything in the firmware)
- Added fault debug messages
- Fixed usbMuxUart

Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.

- When loading a garbage image onto the device, the chip hangs
  and refuses to jump to the bootloader and start dfu

Fix
- Check if chip was in locked state and jump to dfu
- Check if watchdog timer fired and jump to dfu

- Not ready yet
- Will require some more changes to Lib/mk20dx.c

- Minimum protection size is 4k on the mk20dx128vlf5

- Changed static variables to const that should have been const
- Updated CMake files to prepare for MCHCK custom bootloader
- Changed the USB ID numbers and ID number for bootloader
- Only generate DFU or Teensy binary image, not both
- Fixed RAM and FLASH calculator
- Added missing license in delay.c/h (much of it was taken from Teensy source though I've changed a bunch of it)
- Prepared mk20dx.c for upcoming bootloader addition
- mk20dx.h cleanup
- Reduced the MCHCK based flash size for the application image (bootloader changes requires more flash space)
- Fixed bugs in macro.c
- Added keyHold cli command
- Added show pending events debug message for PartialMap macro module

- Requires special string to be compared with the bootloader and VBAT register file

- McHCK uses FLL instead of the PLL for USB (startup, not usb init)
- Added optional debug for the pjrc USB module
- Cleaned up compiler flags

- Lots of code cleanup for the intialization of all arm chips
- Added more gcc flags to help with debugging linker and memory map
- Fixed UART initialization for the smaller MCHCK mk20dx128 (different pin mux)

- Basic compilation and loading is working
- LED can be turned on/off
- USB not yet working

- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet