Archived
1
0
Commit Graph

174 Commits

Author SHA1 Message Date
Jacob Alexander
a07ccdd608 Moving defaultMap.kll to scancode_map.kll (less confusing)
- Changing default name from defaultMap.kll to scancode_map.kll
- Old name of defaultMap.kll will still work (and is the final fallback)
- Updated all the main projects to use the new name
- Updated BETKB (not entirely finished, but mostly complete)
- Added sub-use of interconnect scancode cache for converters
- Added infinity_led.bash

No behaviour changes, just restructuring.
2016-07-06 09:03:23 -07:00
Jacob Alexander
ed19e92ead Updating MBC-55X scan module 2016-06-12 15:53:25 -07:00
Jacob Alexander
8a96e70b4b Fixed udev and added TODO comment 2016-05-29 10:27:21 -07:00
CryHam
f36a09a97a fix ghost vars, ifdef 2016-05-17 10:30:07 +02:00
CryHam
e6506ee5bf Fixed ghosting matrix check (did send bad keys on release), now using also ghost_old state 2016-05-17 10:29:16 +02:00
Jacob Alexander
44215ade18 Revert "Fixed ghosting matrix check (did send bad keys on release), now using…" 2016-05-13 14:38:05 -07:00
CryHam
6efcef28b0 Fixed ghosting matrix check (did send bad keys on release), now using also ghost_old state 2016-05-08 09:38:00 +02:00
Jacob Alexander
bfaed8f58c Move matrix information to a cli command 2016-03-22 19:51:43 -07:00
Jacob Alexander
8e3f155189 Merge pull request #95 from cryham/master
Fixes in CK3 (ghosting matrix), working version on full keyboard.
2016-03-02 11:07:10 -08:00
Jacob Alexander
074134c474 Fixing potential WF LED issue
- Added fix for USB Current Change
  * If called during interrupt, could hang the I2C bus
  * Delaying I2C writes till scan loop
2016-03-01 20:29:11 -08:00
CryHam
602b482538 Updated CK3 with Scan_currentChange (copy from MD1). 2016-03-01 21:00:23 +01:00
CryHam
a848a6bc79 Merge branch 'master' of github.com:kiibohd/controller 2016-03-01 19:40:00 +01:00
CryHam
88670ac72f Changed CK3 matrix scan to Config_Pullup, inverted rows and columns
Added STROBE_DELAY define in matrix.h
All keys scan codes now in defaultMap.kll
2016-03-01 19:38:43 +01:00
Jacob Alexander
f57e069bb9 As per request of original author, updating license to MIT 2016-02-23 14:36:41 -08:00
Jacob Alexander
46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
Jacob Alexander
47ec39da8e Merge branch 'master' of github.com:kiibohd/controller 2016-02-20 13:28:16 -08:00
Jacob Alexander
8dbba83942 Debug code for interconnect cable debugging 2016-02-20 13:27:49 -08:00
CryHam
57a75851e2 Minor styling fixes.
Renamed define to GHOSTING_MATRIX.
Deleted unused files from CK3.
2016-02-20 08:33:39 +01:00
CryHam
6687470ae7 Added support for ghosting matrices and code for elimination.
To use define GHOST in matrix.h, see example in Scan/CK3
2016-02-19 18:10:25 +01:00
Jacob Alexander
1fd19c48ea Changed name from MD1_1 to MD1.1 2016-02-11 22:56:25 -08:00
Jacob Alexander
75832a17b7 Initial code for MD1_1
- IC60 /w Single color LEDs
 - Requires a different matrix configuration so it's incompatible with the old IC60 layout
2016-02-06 18:06:37 -08:00
Jacob Alexander
8c858e4483 Setting WhiteFox LEDs as defaulting to on 2016-01-27 20:41:15 -08:00
Dan McGregor
42084aa960 Merge remote-tracking branch 'github/master' into not-linux 2016-01-05 10:08:14 -06:00
Jacob Alexander
38516d5342 Merge pull request #73 from joshuaflanagan/example_script_variables
Stop requiring editing of example scripts
2015-11-10 11:24:03 -08:00
Joshua Flanagan
cd01bfe0ed Stop requiring editing of example scripts
The example scripts include hardcoded values that
do not work for everyone. Instead of requiring the
files to be edited (and dirtying the git tree),
allow them to take command-line arguments.

Also adds better guidance for Mac OSX virtual
serial ports.
2015-11-10 10:32:06 -06:00
Jacob Alexander
11a44f0ea1 Adding comment about using Pillow instead of PIL 2015-11-01 17:19:09 -08:00
Dan McGregor
0e6f107ea1 Start removing select Linux-isms
bash might not be in /bin. Don't expect it there.
2015-10-20 08:48:59 -06:00
Jacob Alexander
a10afbcc6a Adding remote capability LED control
- Works for all nodes in chain
- Synchronized to 30 ms update rate (required for ISSI chip)
  * Interconnect cannot handle full update speed from Scan module
  * Though it should be able to handle quite a bit more than 30 ms updates
2015-10-16 10:02:01 -07:00
Jacob Alexander
7e68e81f47 Adding basic remote capabilities + UART Rx DMA buffers
- Rx buffers weren't fast enough, had to use DMA :D
- Basic LCD remote capabilities are working, single node
- Multi-node broadcast seems to have a bug still
- DMA ring buffer allowed for significant processing simplification
  * There is an overrun risk, but the buffer is large and generally there isn't too much data being sent (just very quickly)
- Split out LCD layer stack capability into itself and an "exact" version used for updating remote nodes
2015-10-15 00:21:54 -07:00
Jacob Alexander
425ee67331 More compatible name 2015-10-11 23:23:20 -07:00
Jacob Alexander
d9ba60b34e Adding basic ISSI led brightness control capabilities
- 6 modes
  * Single led: decrease, increase, set
  * All leds: decrease, increase, set
- Currently update speed limited to once every 30 ms
  * Likely an I2C driver or ISSI limitation preventing even faster updates
2015-10-09 22:28:31 -07:00
Jacob Alexander
8311f1b083 Updating KType layout to work more nicely with KiiConf 2015-09-29 20:21:29 -07:00
Jacob Alexander
0501e1dfd0 Initial code for KType TKL 2015-09-29 19:29:27 -07:00
Jacob Alexander
893231b355 Adding layer rotation (next/prev) capability
- Requires kll update
- Including udev id update
2015-09-28 19:58:39 -07:00
Jacob Alexander
df7d0be00d Adding example API scripts 2015-09-14 23:37:32 -07:00
Jacob Alexander
2c25f085b6 Single MDErgo1 layout used for KiiConf initial layout setup 2015-09-14 00:48:48 -07:00
Jacob Alexander
85586c574a Updating convenience build scripts to build Left and Right sides
- Includes minor fix for MD1
2015-08-21 23:23:52 -07:00
Jacob Alexander
9c52fb32fa Fixing default ErgoDox layout and adding FlashMode button
- Adds proper flashMode support for all keyboards and microcontrollers (usb and serial)
- flashModeEnabled must be set to 1 otherwise it will only show an error
  * This is on purpose (somewhat dangerous feature as it allows remote flashing)
- Capability cleanup
2015-08-21 19:43:45 -07:00
Jacob Alexander
ef7da32d12 Adding color association to layers 2015-08-18 23:52:48 -07:00
Jacob Alexander
c0fb084eb4 Adding basic support for LCDLayerDisplay using capabilities
- Requires lcdFuncMap.kll instead of stdFuncMap.kll
2015-08-18 23:52:48 -07:00
Jacob Alexander
398018ecf8 Adding examples of custom action/capabilties
- See md1Action.kll for usage
- Includes Block/Unblock
2015-08-16 14:46:26 -07:00
Jacob Alexander
59c14fcdea Adding initial WhiteFox support.
- Includes fix for over-range ScanCodes (would cause hard faults)
- Updated some documentation
- Requires recent kll compiler for the layout
2015-08-16 12:27:12 -07:00
Jacob Alexander
a8caf6e515 Working support for Interconnect
- Supports up to 255 slave nodes (you'll run into ScanCode limitations before then)
- Requires most recent kll compiler update
- Additional debugging output and stats counters
- Noise and parity checking
- Fixed TxFIFO issue when sending buffers larger than the FIFO
- Cleaned up defaultMap.kll
- Added ScanCode caching (reduces interconnect traffic significantly)
- Interconnect module code is conditionally compiled into PartialMap module if required
2015-08-15 21:53:59 -07:00
Jacob Alexander
ecd9923926 Initial UARTConnect scancode support
- Still some issues
- Will require some changes to MatrixARM and PartialMap
  * Currently state information is passed around too frequently
  * Needs to be reduced to state changes only
2015-08-09 00:20:41 -07:00
Jacob Alexander
1c0f94c4ea Adding preliminary MDErgo keymap
- Required updates to CMake in order to handle the multi-layer BaseMaps
2015-08-06 00:36:37 -07:00
Jacob Alexander
0013d7a4f3 Fixing CMake dependency checking for kll_defs.h 2015-08-03 21:42:01 -07:00
Jacob Alexander
d3eaa7a798 Adding ISSILed API calls and default brightness
- Adds override functionality in main module
2015-08-02 16:29:19 -07:00
Jacob Alexander
61cb913833 Using multi-line define support (requires latest kll compiler) 2015-08-02 13:43:28 -07:00
Jacob Alexander
d7b7d31cc2 Adding API to set pixels on LCD screen 2015-08-02 00:00:11 -07:00
Jacob Alexander
9a96c4635d Adding capability to set default image on LCD 2015-08-01 23:13:19 -07:00