/* Copyright (C) 2014-2015 by Jacob Alexander
 *
 * This file is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This file is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this file.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef __CONNECT_SCAN_H
#define __CONNECT_SCAN_H

// ----- Includes -----

// Project Includes
#include <kll.h>



// ----- Enums -----

// Functions
typedef enum Command {
	CableCheck    = 0, // Comm check
	IdRequest     = 1, // Slave initialization (request id from master)
	IdEnumeration = 2, // Slave initialization (begin enumeration from master)
	IdReport      = 3, // Slave initialization complete, report id to master
	ScanCode      = 4, // ScanCode event status change
	Animation     = 5, // Master trigger animation event (same command is sent back to master when ready)
} Command;

// UART Rx/Tx Status
typedef enum UARTStatus {
	UARTStatus_Wait    = 0, // Waiting  Rx: for SYN  Tx: for current command copy to finish
	UARTStatus_SYN     = 1, // Rx: SYN Received, waiting for SOH
	UARTStatus_SOH     = 2, // Rx: SOH Received, waiting for Command
	UARTStatus_Command = 3, // Rx: Command Received, waiting for data
	UARTStatus_Ready   = 4, // Tx: Ready to receive commands
} UARTStatus;



// ----- Structs -----

// UART Connect Commands

// Cable Check Command
// Called on each UART every few seconds to make sure there is a connection
// Also used to make sure there aren't any serious problems with the cable with data corruption
// This command must pass before sending any other commands on the particular UART
// Each argument is always 0xD2 (11010010)
typedef struct CableCheckCommand {
	Command command;
	uint8_t numArgs;
	uint8_t firstArg[0];
} CableCheckCommand;

// Id Request Command
// Issued by the slave device (non-master) whenever it is powered up
// Do not issue any commands until given an Id
// (Except for Cable Check and IdRequestCommand)
typedef struct IdRequestCommand {
	Command command;
} IdRequestCommand;

// Id Enumeration Command
// Issued by the master whenever an Id Request is received
// XXX Future work may include an "external capabilities" list in this command
typedef struct IdEnumerationCommand {
	Command command;
	uint8_t id;
} IdEnumerationCommand;

// Id Report Command
// Issued by each slave to the master when assigned an Id
// XXX Future work will include an "external capabilities" list in this command
typedef struct IdReportCommand {
	Command command;
	uint8_t id;
} IdReportCommand;

// Scan Code Command
// Sent from the slave to the master whenever there is a scan code state change
typedef struct ScanCodeCommand {
	Command command;
	uint8_t id;
	uint8_t numScanCodes;
	TriggerGuide firstScanCode[0];
} ScanCodeCommand;

// Animation Command
// Initiated by the master whenever an animation id should modify it's state
// Then after the leaf slave node receives the command, send it back to the master
// On the way back, each device can begin the animation adjustment
//
// The master->leaf command should indicate to each device that it should finish sending the
// current slave->master data and wait for the leaf->master command
// This allows for a tighter synchronization of animation events
typedef struct AnimationCommand {
	Command command;
	uint8_t animationId;
	uint8_t numParams;
	uint8_t firstParam[0];
} AnimationCommand;



// ----- Functions -----

void Connect_setup( uint8_t master );
void Connect_scan();


#endif // __CONNECT_SCAN_H