Archivováno
1
0
Tento repozitář je archivovaný. Můžete prohlížet soubory, klonovat, ale nemůžete nahrávat a vytvářet nové úkoly nebo pull requesty.
controller/LoadFile/load.dfu
Dan McGregor 0e6f107ea1 Start removing select Linux-isms
bash might not be in /bin. Don't expect it there.
2015-10-20 08:48:59 -06:00

78 řádky
1.9 KiB
Bash
Spustitelný soubor

#!/usr/bin/env bash
# Convenience script for loading firmware onto a dfu type device
# By default, initiates dfu-util
SERIAL_PORT=""
AUTO_SCREEN_SESSION=""
PROG_NAME=$(basename $0)
# Parse all the command line arguments
while (( "$#" >= "1" )); do
# Scan each argument
key="$1"
case $key in
-a|--autoscreen)
AUTO_SCREEN_SESSION="$2"
shift
;;
-f|--fastload)
SERIAL_PORT="$2"
shift
;;
-h|--help)
echo "Usage: $PROG_NAME [options...]"
echo ""
echo "Loads the most recent built firmware (@TARGET_BIN@) to the device."
echo " (load.dfu)"
echo ""
echo "Arguments:"
echo " -a, --autoscreen SERIAL_PORT Use screen on the specified serial port after loading."
echo " e.g. /dev/ttyACM0"
echo " -f, --fastload SERIAL_PORT Send the reload command to the debug terminal."
echo " e.g. /dev/ttyACM0"
echo " NOTE: May not work due to non-functional terminal, or disable remote flashing"
echo " -h, --help This message."
exit 1
;;
*)
echo "INVALID ARG: '$1'"
exit 2
;;
esac
# Shift to the next argument
shift
done
# If a SERIAL_PORT was specified set the uC into reflash mode
# XXX May not be successful if uC is not in a good state (or does not allow remote flashing)
if [[ "$SERIAL_PORT" != "" ]] && [[ -e "$SERIAL_PORT" ]]; then
echo "NOTE: This may fail if the uC is in a bad state or does not support remote flashing"
printf "reload\r" > $SERIAL_PORT
sleep 2
fi
# Load via dfu-util
# Used for McHCK based uCs
if type dfu-util &>/dev/null; then
dfu-util -D @TARGET_BIN@
EXIT_STATUS=$?
else
echo "dfu-util is required to reprogram the device"
exit 3
fi
# Load Screen Session if specified
if (( "$EXIT_STATUS" == "0" )) && [[ "$AUTO_SCREEN_SESSION" != "" ]]; then
if type screen &>/dev/null; then
sleep 0.1
screen $AUTO_SCREEN_SESSION
else
echo "screen is not installed"
exit 3
fi
fi
exit $EXIT_STATUS