Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Output/pjrcUSB/avr/usb_keyboard_serial.c
Rowan Decker 1392571bd7 Fix whitespace
Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
2015-03-08 18:40:01 -07:00

946 lines
24 KiB
C

/* USB Keyboard and CDC Serial Device for Teensy USB Development Board
* Copyright (c) 2009 PJRC.COM, LLC
* Modifications by Jacob Alexander (2011-2014)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Local Includes
#include "usb_keyboard_serial.h"
#include <print.h>
// ----- Variables -----
// zero when we are not configured, non-zero when enumerated
static volatile uint8_t usb_configuration = 0;
// the time remaining before we transmit any partially full
// packet, or send a zero length packet.
static volatile uint8_t transmit_flush_timer = 0;
static uint8_t transmit_previous_timeout = 0;
// serial port settings (baud rate, control signals, etc) set
// by the PC. These are ignored, but kept in RAM.
static uint8_t cdc_line_coding[7] = {0x00, 0xE1, 0x00, 0x00, 0x00, 0x00, 0x08};
static uint8_t cdc_line_rtsdtr = 0;
// ----- USB Keyboard Functions -----
// Sends normal keyboard out to host
// NOTE: Make sure to match the descriptor
void usb_keyboard_toHost()
{
uint8_t i;
// Modifiers
UEDATX = USBKeys_Modifiers;
// Reserved Byte
UEDATX = 0x00;
// Normal Keys, only supports 6 in Boot mode
for ( i = 0; i < 6; i++)
{
UEDATX = USBKeys_Keys[i];
}
UEINTX = 0x00;
}
// send the contents of USBKeys_Keys and USBKeys_Modifiers
inline void usb_keyboard_send()
{
uint8_t intr_state, timeout;
intr_state = SREG;
timeout = UDFNUML + 50;
// Ready to transmit keypresses?
do
{
SREG = intr_state;
// has the USB gone offline? or exceeded timeout?
if ( !usb_configuration || UDFNUML == timeout )
{
erro_print("USB Offline? Timeout?");
return;
}
// get ready to try checking again
intr_state = SREG;
cli();
// If not using Boot protocol, send NKRO
UENUM = USBKeys_Protocol ? KEYBOARD_NKRO_ENDPOINT : KEYBOARD_ENDPOINT;
} while ( !( UEINTX & (1 << RWAL) ) );
switch ( USBKeys_Protocol )
{
// Send boot keyboard interrupt packet(s)
case 0:
usb_keyboard_toHost();
USBKeys_Changed = USBKeyChangeState_None;
break;
// Send NKRO keyboard interrupts packet(s)
case 1:
// Check system control keys
if ( USBKeys_Changed & USBKeyChangeState_System )
{
UEDATX = 0x02; // ID
UEDATX = USBKeys_SysCtrl;
UEINTX = 0; // Finished with ID
USBKeys_Changed &= ~USBKeyChangeState_System; // Mark sent
}
// Check consumer control keys
if ( USBKeys_Changed & USBKeyChangeState_Consumer )
{
UEDATX = 0x03; // ID
UEDATX = (uint8_t)(USBKeys_ConsCtrl & 0x00FF);
UEDATX = (uint8_t)(USBKeys_ConsCtrl >> 8);
UEINTX = 0; // Finished with ID
USBKeys_Changed &= ~USBKeyChangeState_Consumer; // Mark sent
}
// Standard HID Keyboard
if ( USBKeys_Changed )
{
UEDATX = 0x01; // ID
// Modifiers
UEDATX = USBKeys_Modifiers;
// 4-49 (first 6 bytes)
for ( uint8_t byte = 0; byte < 6; byte++ )
UEDATX = USBKeys_Keys[ byte ];
// 51-155 (Middle 14 bytes)
for ( uint8_t byte = 6; byte < 20; byte++ )
UEDATX = USBKeys_Keys[ byte ];
// 157-164 (Next byte)
for ( uint8_t byte = 20; byte < 21; byte++ )
UEDATX = USBKeys_Keys[ byte ];
// 176-221 (last 6 bytes)
for ( uint8_t byte = 21; byte < 27; byte++ )
UEDATX = USBKeys_Keys[ byte ];
UEINTX = 0; // Finished with ID
USBKeys_Changed = USBKeyChangeState_None; // Mark sent
}
break;
}
USBKeys_Idle_Count = 0;
SREG = intr_state;
}
// ----- USB Virtual Serial Port (CDC) Functions -----
// get the next character, or -1 if nothing received
int16_t usb_serial_getchar()
{
uint8_t c, intr_state;
// interrupts are disabled so these functions can be
// used from the main program or interrupt context,
// even both in the same program!
intr_state = SREG;
cli();
if (!usb_configuration) {
SREG = intr_state;
return -1;
}
UENUM = CDC_RX_ENDPOINT;
retry:
c = UEINTX;
if (!(c & (1<<RWAL))) {
// no data in buffer
if (c & (1<<RXOUTI)) {
UEINTX = 0x6B;
goto retry;
}
SREG = intr_state;
return -2;
}
// take one byte out of the buffer
c = UEDATX;
// if buffer completely used, release it
if (!(UEINTX & (1<<RWAL))) UEINTX = 0x6B;
SREG = intr_state;
return c;
}
// number of bytes available in the receive buffer
uint8_t usb_serial_available()
{
uint8_t n=0, i, intr_state;
intr_state = SREG;
cli();
if (usb_configuration) {
UENUM = CDC_RX_ENDPOINT;
n = UEBCLX;
if (!n) {
i = UEINTX;
if (i & (1<<RXOUTI) && !(i & (1<<RWAL))) UEINTX = 0x6B;
}
}
SREG = intr_state;
return n;
}
// discard any buffered input
void usb_serial_flush_input()
{
uint8_t intr_state;
if (usb_configuration) {
intr_state = SREG;
cli();
UENUM = CDC_RX_ENDPOINT;
while ((UEINTX & (1<<RWAL))) {
UEINTX = 0x6B;
}
SREG = intr_state;
}
}
// transmit a character. 0 returned on success, -1 on error
int8_t usb_serial_putchar( uint8_t c )
{
uint8_t timeout, intr_state;
// if we're not online (enumerated and configured), error
if (!usb_configuration) return -1;
// interrupts are disabled so these functions can be
// used from the main program or interrupt context,
// even both in the same program!
intr_state = SREG;
cli();
UENUM = CDC_TX_ENDPOINT;
// if we gave up due to timeout before, don't wait again
if (transmit_previous_timeout) {
if (!(UEINTX & (1<<RWAL))) {
SREG = intr_state;
return -1;
}
transmit_previous_timeout = 0;
}
// wait for the FIFO to be ready to accept data
timeout = UDFNUML + TRANSMIT_TIMEOUT;
while (1) {
// are we ready to transmit?
if (UEINTX & (1<<RWAL)) break;
SREG = intr_state;
// have we waited too long? This happens if the user
// is not running an application that is listening
if (UDFNUML == timeout) {
transmit_previous_timeout = 1;
return -1;
}
// has the USB gone offline?
if (!usb_configuration) return -1;
// get ready to try checking again
intr_state = SREG;
cli();
UENUM = CDC_TX_ENDPOINT;
}
// actually write the byte into the FIFO
UEDATX = c;
// if this completed a packet, transmit it now!
if (!(UEINTX & (1<<RWAL))) UEINTX = 0x3A;
transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
SREG = intr_state;
return 0;
}
// transmit a character, but do not wait if the buffer is full,
// 0 returned on success, -1 on buffer full or error
int8_t usb_serial_putchar_nowait( uint8_t c )
{
uint8_t intr_state;
if (!usb_configuration) return -1;
intr_state = SREG;
cli();
UENUM = CDC_TX_ENDPOINT;
if (!(UEINTX & (1<<RWAL))) {
// buffer is full
SREG = intr_state;
return -2;
}
// actually write the byte into the FIFO
UEDATX = c;
// if this completed a packet, transmit it now!
if (!(UEINTX & (1<<RWAL))) UEINTX = 0x3A;
transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
SREG = intr_state;
return 0;
}
// transmit a buffer.
// 0 returned on success, -1 on error
// This function is optimized for speed! Each call takes approx 6.1 us overhead
// plus 0.25 us per byte. 12 Mbit/sec USB has 8.67 us per-packet overhead and
// takes 0.67 us per byte. If called with 64 byte packet-size blocks, this function
// can transmit at full USB speed using 43% CPU time. The maximum theoretical speed
// is 19 packets per USB frame, or 1216 kbytes/sec. However, bulk endpoints have the
// lowest priority, so any other USB devices will likely reduce the speed. Speed
// can also be limited by how quickly the PC-based software reads data, as the host
// controller in the PC will not allocate bandwitdh without a pending read request.
// (thanks to Victor Suarez for testing and feedback and initial code)
int8_t usb_serial_write( const char *buffer, uint16_t size )
{
uint8_t timeout, intr_state, write_size;
// if we're not online (enumerated and configured), error
if (!usb_configuration) return -1;
// interrupts are disabled so these functions can be
// used from the main program or interrupt context,
// even both in the same program!
intr_state = SREG;
cli();
UENUM = CDC_TX_ENDPOINT;
// if we gave up due to timeout before, don't wait again
if (transmit_previous_timeout) {
if (!(UEINTX & (1<<RWAL))) {
SREG = intr_state;
return -2;
}
transmit_previous_timeout = 0;
}
// each iteration of this loop transmits a packet
while (size) {
// wait for the FIFO to be ready to accept data
timeout = UDFNUML + TRANSMIT_TIMEOUT;
while (1) {
// are we ready to transmit?
if (UEINTX & (1<<RWAL)) break;
SREG = intr_state;
// have we waited too long? This happens if the user
// is not running an application that is listening
if (UDFNUML == timeout) {
transmit_previous_timeout = 1;
return -3;
}
// has the USB gone offline?
if (!usb_configuration) return -4;
// get ready to try checking again
intr_state = SREG;
cli();
UENUM = CDC_TX_ENDPOINT;
}
// compute how many bytes will fit into the next packet
write_size = CDC_TX_SIZE - UEBCLX;
if (write_size > size) write_size = size;
size -= write_size;
// write the packet
switch (write_size) {
#if (CDC_TX_SIZE == 64)
case 64: UEDATX = *buffer++;
case 63: UEDATX = *buffer++;
case 62: UEDATX = *buffer++;
case 61: UEDATX = *buffer++;
case 60: UEDATX = *buffer++;
case 59: UEDATX = *buffer++;
case 58: UEDATX = *buffer++;
case 57: UEDATX = *buffer++;
case 56: UEDATX = *buffer++;
case 55: UEDATX = *buffer++;
case 54: UEDATX = *buffer++;
case 53: UEDATX = *buffer++;
case 52: UEDATX = *buffer++;
case 51: UEDATX = *buffer++;
case 50: UEDATX = *buffer++;
case 49: UEDATX = *buffer++;
case 48: UEDATX = *buffer++;
case 47: UEDATX = *buffer++;
case 46: UEDATX = *buffer++;
case 45: UEDATX = *buffer++;
case 44: UEDATX = *buffer++;
case 43: UEDATX = *buffer++;
case 42: UEDATX = *buffer++;
case 41: UEDATX = *buffer++;
case 40: UEDATX = *buffer++;
case 39: UEDATX = *buffer++;
case 38: UEDATX = *buffer++;
case 37: UEDATX = *buffer++;
case 36: UEDATX = *buffer++;
case 35: UEDATX = *buffer++;
case 34: UEDATX = *buffer++;
case 33: UEDATX = *buffer++;
#endif
#if (CDC_TX_SIZE >= 32)
case 32: UEDATX = *buffer++;
case 31: UEDATX = *buffer++;
case 30: UEDATX = *buffer++;
case 29: UEDATX = *buffer++;
case 28: UEDATX = *buffer++;
case 27: UEDATX = *buffer++;
case 26: UEDATX = *buffer++;
case 25: UEDATX = *buffer++;
case 24: UEDATX = *buffer++;
case 23: UEDATX = *buffer++;
case 22: UEDATX = *buffer++;
case 21: UEDATX = *buffer++;
case 20: UEDATX = *buffer++;
case 19: UEDATX = *buffer++;
case 18: UEDATX = *buffer++;
case 17: UEDATX = *buffer++;
#endif
#if (CDC_TX_SIZE >= 16)
case 16: UEDATX = *buffer++;
case 15: UEDATX = *buffer++;
case 14: UEDATX = *buffer++;
case 13: UEDATX = *buffer++;
case 12: UEDATX = *buffer++;
case 11: UEDATX = *buffer++;
case 10: UEDATX = *buffer++;
case 9: UEDATX = *buffer++;
#endif
case 8: UEDATX = *buffer++;
case 7: UEDATX = *buffer++;
case 6: UEDATX = *buffer++;
case 5: UEDATX = *buffer++;
case 4: UEDATX = *buffer++;
case 3: UEDATX = *buffer++;
case 2: UEDATX = *buffer++;
default:
case 1: UEDATX = *buffer++;
case 0: break;
}
// if this completed a packet, transmit it now!
if (!(UEINTX & (1<<RWAL))) UEINTX = 0x3A;
transmit_flush_timer = TRANSMIT_FLUSH_TIMEOUT;
SREG = intr_state;
}
return 0;
}
// immediately transmit any buffered output.
// This doesn't actually transmit the data - that is impossible!
// USB devices only transmit when the host allows, so the best
// we can do is release the FIFO buffer for when the host wants it
void usb_serial_flush_output()
{
uint8_t intr_state;
intr_state = SREG;
cli();
if (transmit_flush_timer) {
UENUM = CDC_TX_ENDPOINT;
UEINTX = 0x3A;
transmit_flush_timer = 0;
}
SREG = intr_state;
}
// functions to read the various async serial settings. These
// aren't actually used by USB at all (communication is always
// at full USB speed), but they are set by the host so we can
// set them properly if we're converting the USB to a real serial
// communication
uint32_t usb_serial_get_baud()
{
uint32_t *baud = (uint32_t*)cdc_line_coding;
return *baud;
}
uint8_t usb_serial_get_stopbits()
{
return cdc_line_coding[4];
}
uint8_t usb_serial_get_paritytype()
{
return cdc_line_coding[5];
}
uint8_t usb_serial_get_numbits()
{
return cdc_line_coding[6];
}
uint8_t usb_serial_get_control()
{
return cdc_line_rtsdtr;
}
// write the control signals, DCD, DSR, RI, etc
// There is no CTS signal. If software on the host has transmitted
// data to you but you haven't been calling the getchar function,
// it remains buffered (either here or on the host) and can not be
// lost because you weren't listening at the right time, like it
// would in real serial communication.
int8_t usb_serial_set_control( uint8_t signals )
{
uint8_t intr_state;
intr_state = SREG;
cli();
if (!usb_configuration) {
// we're not enumerated/configured
SREG = intr_state;
return -1;
}
UENUM = CDC_ACM_ENDPOINT;
if (!(UEINTX & (1<<RWAL))) {
// unable to write
// TODO; should this try to abort the previously
// buffered message??
SREG = intr_state;
return -1;
}
UEDATX = 0xA1;
UEDATX = 0x20;
UEDATX = 0;
UEDATX = 0;
UEDATX = 0; // 0 seems to work nicely. what if this is 1??
UEDATX = 0;
UEDATX = 1;
UEDATX = 0;
UEDATX = signals;
UEINTX = 0x3A;
SREG = intr_state;
return 0;
}
// ----- General USB Functions -----
// Set the avr into firmware reload mode
void usb_device_reload()
{
cli();
// Disable watchdog, if enabled
// Disable all peripherals
UDCON = 1;
USBCON = (1 << FRZCLK); // Disable USB
UCSR1B = 0;
_delay_ms( 5 );
#if defined(__AVR_AT90USB162__) // Teensy 1.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
DDRB = 0; DDRC = 0; DDRD = 0;
PORTB = 0; PORTC = 0; PORTD = 0;
asm volatile("jmp 0x3E00");
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0x7E00");
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0xFC00");
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0x1FC00");
#endif
}
// WDT Setup for software reset the chip
void wdt_init()
{
MCUSR = 0;
wdt_disable();
}
// initialize USB
uint8_t usb_init()
{
// Check to see if a usb cable has been plugged in
// XXX Not tested (also, not currently needed) -HaaTa
//if ( USB0_STAT & (1 << 1)
// return 0;
HW_CONFIG();
USB_FREEZE(); // enable USB
PLL_CONFIG(); // config PLL
while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
USB_CONFIG(); // start USB clock
UDCON = 0; // enable attach resistor
usb_configuration = 0;
UDIEN = (1<<EORSTE) | (1<<SOFE);
sei();
// Disable watchdog timer after possible software reset
//wdt_init(); // XXX Not working...seems to be ok without this, not sure though
return 1;
}
// return 0 if the USB is not configured, or the configuration
// number selected by the HOST
uint8_t usb_configured()
{
return usb_configuration;
}
// USB Device Interrupt - handle all device-level events
// the transmit buffer flushing is triggered by the start of frame
//
ISR( USB_GEN_vect )
{
uint8_t intbits, t_cdc;
intbits = UDINT;
UDINT = 0;
if ( intbits & (1 << EORSTI) )
{
UENUM = 0;
UECONX = 1;
UECFG0X = EP_TYPE_CONTROL;
UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
UEIENX = (1 << RXSTPE);
usb_configuration = 0;
cdc_line_rtsdtr = 0;
}
if ( (intbits & (1 << SOFI)) && usb_configuration )
{
t_cdc = transmit_flush_timer;
if ( t_cdc )
{
transmit_flush_timer = --t_cdc;
if ( !t_cdc )
{
UENUM = CDC_TX_ENDPOINT;
UEINTX = 0x3A;
}
}
static uint8_t div4 = 0;
if ( USBKeys_Idle_Config && (++div4 & 3) == 0 )
{
USBKeys_Idle_Count++;
if ( USBKeys_Idle_Count == USBKeys_Idle_Config )
{
// XXX TODO Is this even used? If so, when? -Jacob
// From hasu's code, this section looks like it could fix the Mac SET_IDLE problem
// Send normal keyboard interrupt packet(s)
switch ( USBKeys_Protocol )
{
// Send boot keyboard interrupt packet(s)
case 0: usb_keyboard_toHost(); break;
// Send NKRO keyboard interrupts packet(s)
//case 1: usb_nkrokeyboard_toHost(); break; // XXX Not valid anymore
}
print("IDLE");
}
}
}
}
// Misc functions to wait for ready and send/receive packets
static inline void usb_wait_in_ready()
{
while (!(UEINTX & (1<<TXINI))) ;
}
static inline void usb_send_in()
{
UEINTX = ~(1<<TXINI);
}
static inline void usb_wait_receive_out()
{
while (!(UEINTX & (1<<RXOUTI))) ;
}
static inline void usb_ack_out()
{
UEINTX = ~(1<<RXOUTI);
}
// USB Endpoint Interrupt - endpoint 0 is handled here. The
// other endpoints are manipulated by the user-callable
// functions, and the start-of-frame interrupt.
//
ISR( USB_COM_vect )
{
uint8_t intbits;
const uint8_t *list;
const uint8_t *cfg;
uint8_t i, n, len, en;
uint8_t *p;
uint8_t bmRequestType;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
uint16_t desc_val;
const uint8_t *desc_addr;
uint8_t desc_length;
UENUM = 0;
intbits = UEINTX;
if (intbits & (1<<RXSTPI))
{
bmRequestType = UEDATX;
bRequest = UEDATX;
wValue = UEDATX;
wValue |= (UEDATX << 8);
wIndex = UEDATX;
wIndex |= (UEDATX << 8);
wLength = UEDATX;
wLength |= (UEDATX << 8);
UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
if ( bRequest == GET_DESCRIPTOR )
{
list = (const uint8_t *)descriptor_list;
for ( i = 0; ; i++ )
{
if ( i >= NUM_DESC_LIST )
{
UECONX = (1 << STALLRQ) | (1 << EPEN); //stall
return;
}
desc_val = pgm_read_word(list);
if ( desc_val != wValue )
{
list += sizeof( struct descriptor_list_struct );
continue;
}
list += 2;
desc_val = pgm_read_word(list);
if ( desc_val != wIndex )
{
list += sizeof(struct descriptor_list_struct) - 2;
continue;
}
list += 2;
desc_addr = (const uint8_t *)pgm_read_word(list);
list += 2;
desc_length = pgm_read_byte(list);
break;
}
len = (wLength < 256) ? wLength : 255;
if (len > desc_length) len = desc_length;
do {
// wait for host ready for IN packet
do {
i = UEINTX;
} while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
if (i & (1<<RXOUTI)) return; // abort
// send IN packet
n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
for (i = n; i; i--) {
UEDATX = pgm_read_byte(desc_addr++);
}
len -= n;
usb_send_in();
} while (len || n == ENDPOINT0_SIZE);
return;
}
if (bRequest == SET_ADDRESS) {
usb_send_in();
usb_wait_in_ready();
UDADDR = wValue | (1<<ADDEN);
return;
}
if ( bRequest == SET_CONFIGURATION && bmRequestType == 0 )
{
usb_configuration = wValue;
cdc_line_rtsdtr = 0;
transmit_flush_timer = 0;
usb_send_in();
cfg = endpoint_config_table;
// Setup each of the 6 additional endpoints (0th already configured)
for ( i = 1; i < 6; i++ )
{
UENUM = i;
en = pgm_read_byte(cfg++);
UECONX = en;
if (en)
{
UECFG0X = pgm_read_byte(cfg++);
UECFG1X = pgm_read_byte(cfg++);
}
}
UERST = 0x7E;
UERST = 0;
return;
}
if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
usb_wait_in_ready();
UEDATX = usb_configuration;
usb_send_in();
return;
}
if ( ( wIndex == KEYBOARD_INTERFACE && USBKeys_Protocol == 0 )
|| ( wIndex == KEYBOARD_NKRO_INTERFACE && USBKeys_Protocol == 1 ) )
{
if ( bmRequestType == 0xA1)
{
if ( bRequest == HID_GET_REPORT )
{
usb_wait_in_ready();
// Send normal keyboard interrupt packet(s)
switch ( USBKeys_Protocol )
{
// Send boot keyboard interrupt packet(s)
case 0: usb_keyboard_toHost(); break;
// Send NKRO keyboard interrupts packet(s)
//case 1: usb_nkrokeyboard_toHost(); break; // XXX Not valid anymore
}
usb_send_in();
return;
}
if ( bRequest == HID_GET_IDLE )
{
usb_wait_in_ready();
UEDATX = USBKeys_Idle_Config;
usb_send_in();
return;
}
if ( bRequest == HID_GET_PROTOCOL )
{
usb_wait_in_ready();
UEDATX = USBKeys_Protocol;
usb_send_in();
return;
}
}
if ( bmRequestType == 0x21 )
{
if ( bRequest == HID_SET_REPORT )
{
usb_wait_receive_out();
USBKeys_LEDs = UEDATX;
usb_ack_out();
usb_send_in();
return;
}
if ( bRequest == HID_SET_IDLE )
{
usb_wait_in_ready();
USBKeys_Idle_Config = (wValue >> 8);
USBKeys_Idle_Count = 0;
usb_send_in();
//print("HID IDLE");
return;
}
if ( bRequest == HID_SET_PROTOCOL )
{
usb_wait_in_ready();
USBKeys_Protocol = wValue; // 0 - Boot Mode, 1 - NKRO Mode
usb_send_in();
//print("HID SET");
return;
}
}
}
if (bRequest == CDC_GET_LINE_CODING && bmRequestType == 0xA1) {
usb_wait_in_ready();
p = cdc_line_coding;
for (i=0; i<7; i++) {
UEDATX = *p++;
}
usb_send_in();
return;
}
if (bRequest == CDC_SET_LINE_CODING && bmRequestType == 0x21) {
usb_wait_receive_out();
p = cdc_line_coding;
for (i=0; i<7; i++) {
*p++ = UEDATX;
}
usb_ack_out();
usb_send_in();
return;
}
if (bRequest == CDC_SET_CONTROL_LINE_STATE && bmRequestType == 0x21) {
cdc_line_rtsdtr = wValue;
usb_wait_in_ready();
usb_send_in();
return;
}
if (bRequest == GET_STATUS) {
usb_wait_in_ready();
i = 0;
if (bmRequestType == 0x82) {
UENUM = wIndex;
if (UECONX & (1<<STALLRQ)) i = 1;
UENUM = 0;
}
UEDATX = i;
UEDATX = 0;
usb_send_in();
return;
}
if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
&& bmRequestType == 0x02 && wValue == 0) {
i = wIndex & 0x7F;
if (i >= 1 && i <= MAX_ENDPOINT) {
usb_send_in();
UENUM = i;
if (bRequest == SET_FEATURE) {
UECONX = (1<<STALLRQ)|(1<<EPEN);
} else {
UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN);
UERST = (1 << i);
UERST = 0;
}
return;
}
}
}
UECONX = (1 << STALLRQ) | (1 << EPEN); // stall
}