22a24e967b
- usbProtocol = 0;
1584 lines
38 KiB
C
1584 lines
38 KiB
C
/* Teensyduino Core Library
|
|
* http://www.pjrc.com/teensy/
|
|
* Copyright (c) 2013 PJRC.COM, LLC.
|
|
* Modifications by Jacob Alexander (2013-2016)
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining
|
|
* a copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sublicense, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* 1. The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* 2. If the Software is incorporated into a build system that allows
|
|
* selection among a list of target devices, then similar target
|
|
* devices manufactured by PJRC.COM must be included in the list of
|
|
* target devices and selectable in the same manner.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
// ----- Includes -----
|
|
|
|
// Project Includes
|
|
#include <Lib/OutputLib.h>
|
|
#include <print.h>
|
|
#include <kll_defs.h>
|
|
|
|
// Local Includes
|
|
#include "usb_dev.h"
|
|
#include "usb_mem.h"
|
|
|
|
#if enableVirtualSerialPort_define == 1
|
|
#include "usb_serial.h"
|
|
#endif
|
|
|
|
|
|
|
|
// ----- Defines -----
|
|
|
|
// DEBUG Mode
|
|
// XXX - Only use when using usbMuxUart Module
|
|
// Delay causes issues initializing more than 1 hid device (i.e. NKRO keyboard)
|
|
//#define UART_DEBUG 1
|
|
// Debug Unknown USB requests, usually what you want to debug USB issues
|
|
//#define UART_DEBUG_UNKNOWN 1
|
|
|
|
|
|
#define TX_STATE_BOTH_FREE_EVEN_FIRST 0
|
|
#define TX_STATE_BOTH_FREE_ODD_FIRST 1
|
|
#define TX_STATE_EVEN_FREE 2
|
|
#define TX_STATE_ODD_FREE 3
|
|
#define TX_STATE_NONE_FREE_EVEN_FIRST 4
|
|
#define TX_STATE_NONE_FREE_ODD_FIRST 5
|
|
|
|
#define BDT_OWN 0x80
|
|
#define BDT_DATA1 0x40
|
|
#define BDT_DATA0 0x00
|
|
#define BDT_DTS 0x08
|
|
#define BDT_STALL 0x04
|
|
|
|
#define TX 1
|
|
#define RX 0
|
|
#define ODD 1
|
|
#define EVEN 0
|
|
#define DATA0 0
|
|
#define DATA1 1
|
|
|
|
|
|
#define GET_STATUS 0
|
|
#define CLEAR_FEATURE 1
|
|
#define SET_FEATURE 3
|
|
#define SET_ADDRESS 5
|
|
#define GET_DESCRIPTOR 6
|
|
#define SET_DESCRIPTOR 7
|
|
#define GET_CONFIGURATION 8
|
|
#define SET_CONFIGURATION 9
|
|
#define GET_INTERFACE 10
|
|
#define SET_INTERFACE 11
|
|
#define SYNCH_FRAME 12
|
|
|
|
#define TX_STATE_BOTH_FREE_EVEN_FIRST 0
|
|
#define TX_STATE_BOTH_FREE_ODD_FIRST 1
|
|
#define TX_STATE_EVEN_FREE 2
|
|
#define TX_STATE_ODD_FREE 3
|
|
#define TX_STATE_NONE_FREE 4
|
|
|
|
|
|
|
|
|
|
|
|
// ----- Macros -----
|
|
|
|
#define BDT_PID(n) (((n) >> 2) & 15)
|
|
|
|
#define BDT_DESC(count, data) (BDT_OWN | BDT_DTS \
|
|
| ((data) ? BDT_DATA1 : BDT_DATA0) \
|
|
| ((count) << 16))
|
|
|
|
#define index(endpoint, tx, odd) (((endpoint) << 2) | ((tx) << 1) | (odd))
|
|
#define stat2bufferdescriptor(stat) (table + ((stat) >> 2))
|
|
|
|
|
|
|
|
// ----- Structs -----
|
|
|
|
// buffer descriptor table
|
|
|
|
typedef struct {
|
|
uint32_t desc;
|
|
void * addr;
|
|
} bdt_t;
|
|
|
|
static union {
|
|
struct {
|
|
union {
|
|
struct {
|
|
uint8_t bmRequestType;
|
|
uint8_t bRequest;
|
|
};
|
|
uint16_t wRequestAndType;
|
|
};
|
|
uint16_t wValue;
|
|
uint16_t wIndex;
|
|
uint16_t wLength;
|
|
};
|
|
struct {
|
|
uint32_t word1;
|
|
uint32_t word2;
|
|
};
|
|
} setup;
|
|
|
|
|
|
|
|
// ----- Variables -----
|
|
|
|
__attribute__ ((section(".usbdescriptortable"), used))
|
|
static bdt_t table[ (NUM_ENDPOINTS + 1) * 4 ];
|
|
|
|
static usb_packet_t *rx_first [ NUM_ENDPOINTS ];
|
|
static usb_packet_t *rx_last [ NUM_ENDPOINTS ];
|
|
static usb_packet_t *tx_first [ NUM_ENDPOINTS ];
|
|
static usb_packet_t *tx_last [ NUM_ENDPOINTS ];
|
|
uint16_t usb_rx_byte_count_data[ NUM_ENDPOINTS ];
|
|
|
|
static uint8_t tx_state[NUM_ENDPOINTS];
|
|
|
|
// SETUP always uses a DATA0 PID for the data field of the SETUP transaction.
|
|
// transactions in the data phase start with DATA1 and toggle (figure 8-12, USB1.1)
|
|
// Status stage uses a DATA1 PID.
|
|
|
|
static uint8_t ep0_rx0_buf[EP0_SIZE] __attribute__ ((aligned (4)));
|
|
static uint8_t ep0_rx1_buf[EP0_SIZE] __attribute__ ((aligned (4)));
|
|
static const uint8_t *ep0_tx_ptr = NULL;
|
|
static uint16_t ep0_tx_len;
|
|
static uint8_t ep0_tx_bdt_bank = 0;
|
|
static uint8_t ep0_tx_data_toggle = 0;
|
|
uint8_t usb_rx_memory_needed = 0;
|
|
|
|
volatile uint8_t usb_configuration = 0;
|
|
volatile uint8_t usb_reboot_timer = 0;
|
|
|
|
static uint8_t reply_buffer[8];
|
|
|
|
static uint8_t power_neg_delay;
|
|
static uint32_t power_neg_time;
|
|
|
|
static uint8_t usb_dev_sleep = 0;
|
|
|
|
|
|
|
|
// ----- Functions -----
|
|
|
|
static void endpoint0_stall()
|
|
{
|
|
#ifdef UART_DEBUG_UNKNOWN
|
|
print("STALL : ");
|
|
printInt32( systick_millis_count - USBInit_TimeStart );
|
|
print(" ms");
|
|
print(NL);
|
|
#endif
|
|
USB0_ENDPT0 = USB_ENDPT_EPSTALL | USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
|
|
}
|
|
|
|
static void endpoint0_transmit( const void *data, uint32_t len )
|
|
{
|
|
table[index(0, TX, ep0_tx_bdt_bank)].addr = (void *)data;
|
|
table[index(0, TX, ep0_tx_bdt_bank)].desc = BDT_DESC(len, ep0_tx_data_toggle);
|
|
ep0_tx_data_toggle ^= 1;
|
|
ep0_tx_bdt_bank ^= 1;
|
|
}
|
|
|
|
void usb_reinit()
|
|
{
|
|
usb_configuration = 0; // Clear USB configuration if we have one
|
|
USB0_CONTROL = 0; // Disable D+ Pullup to simulate disconnect
|
|
delay(10); // Delay is necessary to simulate disconnect
|
|
usb_init();
|
|
}
|
|
|
|
// Used to check any USB state changes that may not have a proper interrupt
|
|
// Called once per scan loop, should take minimal processing time or it may affect other modules
|
|
void usb_device_check()
|
|
{
|
|
// Check to see if we're still waiting for the next USB request after Get Configuration Descriptor
|
|
// If still waiting, restart the USB initialization with a lower power requirement
|
|
if ( power_neg_delay )
|
|
{
|
|
// Check if 100 ms has elapsed
|
|
if ( systick_millis_count - power_neg_time > 100 )
|
|
{
|
|
power_neg_delay = 0;
|
|
|
|
// USB Low Power Negotiation
|
|
#if enableUSBLowPowerNegotiation_define == 1
|
|
// Check to see if bMaxPower has already be lowered
|
|
// This generally points to a USB bug (host or device?)
|
|
if ( *usb_bMaxPower == 50 )
|
|
{
|
|
warn_msg("Power negotiation delay detected again, likely a system/device USB bug");
|
|
return;
|
|
}
|
|
|
|
// Update bMaxPower
|
|
// The value set is in increments of 2 mA
|
|
// So 50 * 2 mA = 100 mA
|
|
// XXX Currently only transitions to 100 mA
|
|
// It may be possible to transition down again to 20 mA
|
|
*usb_bMaxPower = 50;
|
|
|
|
// Re-initialize USB
|
|
usb_reinit();
|
|
#else
|
|
warn_msg("USB Low Power Negotation Disabled, condition detected.");
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
static void usb_setup()
|
|
{
|
|
const uint8_t *data = NULL;
|
|
uint32_t datalen = 0;
|
|
const usb_descriptor_list_t *list;
|
|
uint32_t size;
|
|
volatile uint8_t *reg;
|
|
uint8_t epconf;
|
|
const uint8_t *cfg;
|
|
int i;
|
|
|
|
// Reset USB Init timer
|
|
USBInit_TimeEnd = systick_millis_count;
|
|
USBInit_Ticks++;
|
|
|
|
// If another request is made, disable the power negotiation check
|
|
// See GET_DESCRIPTOR - Configuration
|
|
if ( power_neg_delay )
|
|
{
|
|
power_neg_delay = 0;
|
|
}
|
|
|
|
switch ( setup.wRequestAndType )
|
|
{
|
|
case 0x0500: // SET_ADDRESS
|
|
goto send;
|
|
|
|
case 0x0900: // SET_CONFIGURATION
|
|
#ifdef UART_DEBUG
|
|
print("CONFIGURE - ");
|
|
#endif
|
|
usb_configuration = setup.wValue;
|
|
Output_Available = usb_configuration;
|
|
reg = &USB0_ENDPT1;
|
|
cfg = usb_endpoint_config_table;
|
|
|
|
// Now configured so we can utilize bMaxPower now
|
|
Output_update_usb_current( *usb_bMaxPower * 2 );
|
|
|
|
// clear all BDT entries, free any allocated memory...
|
|
for ( i = 4; i < ( NUM_ENDPOINTS + 1) * 4; i++ )
|
|
{
|
|
if ( table[i].desc & BDT_OWN )
|
|
{
|
|
usb_free( (usb_packet_t *)((uint8_t *)(table[ i ].addr) - 8) );
|
|
}
|
|
}
|
|
// free all queued packets
|
|
for ( i = 0; i < NUM_ENDPOINTS; i++ )
|
|
{
|
|
usb_packet_t *p, *n;
|
|
p = rx_first[i];
|
|
while ( p )
|
|
{
|
|
n = p->next;
|
|
usb_free(p);
|
|
p = n;
|
|
}
|
|
rx_first[ i ] = NULL;
|
|
rx_last[ i ] = NULL;
|
|
p = tx_first[i];
|
|
while (p)
|
|
{
|
|
n = p->next;
|
|
usb_free(p);
|
|
p = n;
|
|
}
|
|
tx_first[ i ] = NULL;
|
|
tx_last[ i ] = NULL;
|
|
usb_rx_byte_count_data[i] = 0;
|
|
|
|
switch ( tx_state[ i ] )
|
|
{
|
|
case TX_STATE_EVEN_FREE:
|
|
case TX_STATE_NONE_FREE_EVEN_FIRST:
|
|
tx_state[ i ] = TX_STATE_BOTH_FREE_EVEN_FIRST;
|
|
break;
|
|
case TX_STATE_ODD_FREE:
|
|
case TX_STATE_NONE_FREE_ODD_FIRST:
|
|
tx_state[ i ] = TX_STATE_BOTH_FREE_ODD_FIRST;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
usb_rx_memory_needed = 0;
|
|
for ( i = 1; i <= NUM_ENDPOINTS; i++ )
|
|
{
|
|
epconf = *cfg++;
|
|
*reg = epconf;
|
|
reg += 4;
|
|
if ( epconf & USB_ENDPT_EPRXEN )
|
|
{
|
|
usb_packet_t *p;
|
|
p = usb_malloc();
|
|
if ( p )
|
|
{
|
|
table[ index( i, RX, EVEN ) ].addr = p->buf;
|
|
table[ index( i, RX, EVEN ) ].desc = BDT_DESC( 64, 0 );
|
|
}
|
|
else
|
|
{
|
|
table[ index( i, RX, EVEN ) ].desc = 0;
|
|
usb_rx_memory_needed++;
|
|
}
|
|
p = usb_malloc();
|
|
if ( p )
|
|
{
|
|
table[ index( i, RX, ODD ) ].addr = p->buf;
|
|
table[ index( i, RX, ODD ) ].desc = BDT_DESC( 64, 1 );
|
|
}
|
|
else
|
|
{
|
|
table[ index( i, RX, ODD ) ].desc = 0;
|
|
usb_rx_memory_needed++;
|
|
}
|
|
}
|
|
table[ index( i, TX, EVEN ) ].desc = 0;
|
|
table[ index( i, TX, ODD ) ].desc = 0;
|
|
}
|
|
goto send;
|
|
|
|
case 0x0880: // GET_CONFIGURATION
|
|
reply_buffer[0] = usb_configuration;
|
|
datalen = 1;
|
|
data = reply_buffer;
|
|
goto send;
|
|
|
|
case 0x0080: // GET_STATUS (device)
|
|
reply_buffer[0] = 0;
|
|
reply_buffer[1] = 0;
|
|
datalen = 2;
|
|
data = reply_buffer;
|
|
goto send;
|
|
|
|
case 0x0082: // GET_STATUS (endpoint)
|
|
if ( setup.wIndex > NUM_ENDPOINTS )
|
|
{
|
|
// TODO: do we need to handle IN vs OUT here?
|
|
endpoint0_stall();
|
|
return;
|
|
}
|
|
reply_buffer[0] = 0;
|
|
reply_buffer[1] = 0;
|
|
if ( *(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4) & 0x02 )
|
|
reply_buffer[0] = 1;
|
|
data = reply_buffer;
|
|
datalen = 2;
|
|
goto send;
|
|
|
|
case 0x0100: // CLEAR_FEATURE (device)
|
|
switch ( setup.wValue )
|
|
{
|
|
// CLEAR_FEATURE(DEVICE_REMOTE_WAKEUP)
|
|
// See SET_FEATURE(DEVICE_REMOTE_WAKEUP) for details
|
|
case 0x1:
|
|
goto send;
|
|
}
|
|
|
|
warn_msg("SET_FEATURE - Device wValue(");
|
|
printHex( setup.wValue );
|
|
print( ")" NL );
|
|
endpoint0_stall();
|
|
return;
|
|
|
|
case 0x0101: // CLEAR_FEATURE (interface)
|
|
// TODO: Currently ignoring, perhaps useful? -HaaTa
|
|
warn_msg("CLEAR_FEATURE - Interface wValue(");
|
|
printHex( setup.wValue );
|
|
print(") wIndex(");
|
|
printHex( setup.wIndex );
|
|
print( ")" NL );
|
|
endpoint0_stall();
|
|
return;
|
|
|
|
case 0x0102: // CLEAR_FEATURE (endpoint)
|
|
i = setup.wIndex & 0x7F;
|
|
if ( i > NUM_ENDPOINTS || setup.wValue != 0 )
|
|
{
|
|
endpoint0_stall();
|
|
return;
|
|
}
|
|
(*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) &= ~0x02;
|
|
// TODO: do we need to clear the data toggle here?
|
|
goto send;
|
|
|
|
case 0x0300: // SET_FEATURE (device)
|
|
switch ( setup.wValue )
|
|
{
|
|
// SET_FEATURE(DEVICE_REMOTE_WAKEUP)
|
|
// XXX: Only used to confirm Remote Wake
|
|
// Used on Mac OSX and Windows not on Linux
|
|
// Good post on the behaviour:
|
|
// http://community.silabs.com/t5/8-bit-MCU/Remote-wakeup-HID/m-p/74957#M30802
|
|
case 0x1:
|
|
goto send;
|
|
}
|
|
|
|
warn_msg("SET_FEATURE - Device wValue(");
|
|
printHex( setup.wValue );
|
|
print( ")" NL );
|
|
endpoint0_stall();
|
|
return;
|
|
|
|
case 0x0301: // SET_FEATURE (interface)
|
|
// TODO: Currently ignoring, perhaps useful? -HaaTa
|
|
warn_msg("SET_FEATURE - Interface wValue(");
|
|
printHex( setup.wValue );
|
|
print(") wIndex(");
|
|
printHex( setup.wIndex );
|
|
print( ")" NL );
|
|
endpoint0_stall();
|
|
return;
|
|
|
|
case 0x0302: // SET_FEATURE (endpoint)
|
|
i = setup.wIndex & 0x7F;
|
|
if ( i > NUM_ENDPOINTS || setup.wValue != 0 )
|
|
{
|
|
// TODO: do we need to handle IN vs OUT here?
|
|
endpoint0_stall();
|
|
return;
|
|
}
|
|
(*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) |= 0x02;
|
|
// TODO: do we need to clear the data toggle here?
|
|
goto send;
|
|
|
|
case 0x0680: // GET_DESCRIPTOR
|
|
case 0x0681:
|
|
#ifdef UART_DEBUG
|
|
print("desc:");
|
|
printHex( setup.wValue );
|
|
print( NL );
|
|
#endif
|
|
for ( list = usb_descriptor_list; 1; list++ )
|
|
{
|
|
if ( list->addr == NULL )
|
|
break;
|
|
if ( setup.wValue == list->wValue && setup.wIndex == list->wIndex )
|
|
{
|
|
data = list->addr;
|
|
if ( (setup.wValue >> 8) == 3 )
|
|
{
|
|
// for string descriptors, use the descriptor's
|
|
// length field, allowing runtime configured
|
|
// length.
|
|
datalen = *(list->addr);
|
|
}
|
|
else
|
|
{
|
|
datalen = list->length;
|
|
}
|
|
|
|
// XXX Power negotiation hack -HaaTa
|
|
// Some devices such as the Apple Ipad do not support bMaxPower greater than 100 mA
|
|
// However, there is no provision in the basic USB 2.0 stack for power negotiation
|
|
// To get around this:
|
|
// * Attempt to set bMaxPower to 500 mA first
|
|
// * If more than 100 ms passes since retrieving a Get Configuration Descriptor
|
|
// (Descriptor with bMaxPower in it)
|
|
// * Change usb_bMaxPower to 50 (100 mA)
|
|
// * Restart the USB init process
|
|
// According to notes online, it says that some Apple devices can only do 20 mA
|
|
// However, in my testing this hasn't been the case
|
|
// (you can also draw as much current as you want if you just lie in the descriptor :P)
|
|
// If this becomes an issue we can use this hack a second time to negotiate down to 20 mA
|
|
// (which should be fine for just the mcu)
|
|
if ( setup.wValue == 0x0200 && setup.wIndex == 0x0 )
|
|
{
|
|
power_neg_delay = 1;
|
|
power_neg_time = systick_millis_count;
|
|
}
|
|
|
|
#if UART_DEBUG
|
|
print("Desc found, ");
|
|
printHex32( (uint32_t)data );
|
|
print(",");
|
|
printHex( datalen );
|
|
print(",");
|
|
printHex_op( data[0], 2 );
|
|
printHex_op( data[1], 2 );
|
|
printHex_op( data[2], 2 );
|
|
printHex_op( data[3], 2 );
|
|
printHex_op( data[4], 2 );
|
|
printHex_op( data[5], 2 );
|
|
print( NL );
|
|
#endif
|
|
goto send;
|
|
}
|
|
}
|
|
#ifdef UART_DEBUG
|
|
print( "desc: not found" NL );
|
|
#endif
|
|
endpoint0_stall();
|
|
return;
|
|
|
|
#if enableVirtualSerialPort_define == 1
|
|
case 0x2221: // CDC_SET_CONTROL_LINE_STATE
|
|
usb_cdc_line_rtsdtr = setup.wValue;
|
|
//info_print("set control line state");
|
|
goto send;
|
|
|
|
case 0x21A1: // CDC_GET_LINE_CODING
|
|
data = (uint8_t*)&usb_cdc_line_coding;
|
|
datalen = sizeof( usb_cdc_line_coding );
|
|
goto send;
|
|
|
|
case 0x2021: // CDC_SET_LINE_CODING
|
|
// ZLP Reply
|
|
// Settings are applied in PID=OUT
|
|
goto send;
|
|
#endif
|
|
|
|
case 0x0921: // HID SET_REPORT
|
|
// ZLP Reply
|
|
// Settings are applied in PID=OUT
|
|
|
|
#ifdef UART_DEBUG
|
|
print("report_type(");
|
|
printHex( setup.wValue >> 8 );
|
|
print(")report_id(");
|
|
printHex( setup.wValue & 0xFF );
|
|
print(")interface(");
|
|
printHex( setup.wIndex );
|
|
print(")len(");
|
|
printHex( setup.wLength );
|
|
print(")");
|
|
print( NL );
|
|
#endif
|
|
|
|
// Interface
|
|
switch ( setup.wIndex & 0xFF )
|
|
{
|
|
// Keyboard Interface
|
|
case KEYBOARD_INTERFACE:
|
|
break;
|
|
// NKRO Keyboard Interface
|
|
case NKRO_KEYBOARD_INTERFACE:
|
|
break;
|
|
default:
|
|
warn_msg("Unknown interface - ");
|
|
printHex( setup.wIndex );
|
|
print( NL );
|
|
endpoint0_stall();
|
|
return;
|
|
}
|
|
|
|
goto send;
|
|
|
|
case 0x01A1: // HID GET_REPORT
|
|
#ifdef UART_DEBUG
|
|
print("GET_REPORT - ");
|
|
printHex( setup.wIndex );
|
|
print(NL);
|
|
#endif
|
|
// Search through descriptors returning necessary info
|
|
for ( list = usb_descriptor_list; 1; list++ )
|
|
{
|
|
if ( list->addr == NULL )
|
|
break;
|
|
if ( list->wValue != 0x2200 )
|
|
continue;
|
|
if ( setup.wIndex == list->wIndex )
|
|
{
|
|
data = list->addr;
|
|
datalen = list->length;
|
|
goto send;
|
|
}
|
|
}
|
|
endpoint0_stall();
|
|
return;
|
|
|
|
case 0x0A21: // HID SET_IDLE
|
|
#ifdef UART_DEBUG
|
|
print("SET_IDLE - ");
|
|
printHex( setup.wValue );
|
|
print(" - ");
|
|
printHex( setup.wValue >> 8 );
|
|
print(NL);
|
|
#endif
|
|
USBKeys_Idle_Config = (setup.wValue >> 8);
|
|
USBKeys_Idle_Expiry = 0;
|
|
goto send;
|
|
|
|
case 0x02A1: // HID GET_IDLE
|
|
#ifdef UART_DEBUG
|
|
print("SET_IDLE - ");
|
|
printHex( setup.wValue );
|
|
print(" - ");
|
|
printHex( USBKeys_Idle_Config );
|
|
print(NL);
|
|
#endif
|
|
reply_buffer[0] = USBKeys_Idle_Config;
|
|
data = reply_buffer;
|
|
datalen = 1;
|
|
goto send;
|
|
|
|
|
|
case 0x0B21: // HID SET_PROTOCOL
|
|
#ifdef UART_DEBUG
|
|
print("SET_PROTOCOL - ");
|
|
printHex( setup.wValue );
|
|
print(" - ");
|
|
printHex( setup.wValue & 0xFF );
|
|
print(NL);
|
|
#endif
|
|
USBKeys_Protocol = setup.wValue & 0xFF; // 0 - Boot Mode, 1 - NKRO Mode
|
|
|
|
// Force Boot Mode if defined by KLL
|
|
if ( USBProtocol_define == 0 )
|
|
{
|
|
USBKeys_Protocol = USBProtocol_define;
|
|
}
|
|
goto send;
|
|
|
|
case 0x03A1: /// HID GET_PROTOCOL
|
|
#ifdef UART_DEBUG
|
|
print("GET_PROTOCOL - ");
|
|
printHex( setup.wValue );
|
|
print(" - ");
|
|
printHex( USBKeys_Protocol );
|
|
print(NL);
|
|
#endif
|
|
reply_buffer[0] = USBKeys_Protocol;
|
|
data = reply_buffer;
|
|
datalen = 1;
|
|
goto send;
|
|
|
|
// case 0xC940:
|
|
default:
|
|
#ifdef UART_DEBUG_UNKNOWN
|
|
print("UNKNOWN: ");
|
|
printInt32( systick_millis_count - USBInit_TimeStart );
|
|
print(" ms");
|
|
print(NL);
|
|
#endif
|
|
endpoint0_stall();
|
|
return;
|
|
}
|
|
|
|
send:
|
|
#ifdef UART_DEBUG
|
|
print("setup send ");
|
|
printHex32( (uint32_t)data );
|
|
print(",");
|
|
for ( uint8_t c = 0; c < datalen; c++ )
|
|
{
|
|
printHex( data[c] );
|
|
print(" ");
|
|
}
|
|
print(",");
|
|
printHex( datalen );
|
|
print( NL );
|
|
#endif
|
|
|
|
if ( datalen > setup.wLength )
|
|
datalen = setup.wLength;
|
|
|
|
size = datalen;
|
|
if ( size > EP0_SIZE )
|
|
size = EP0_SIZE;
|
|
|
|
endpoint0_transmit( data, size );
|
|
data += size;
|
|
datalen -= size;
|
|
|
|
// See if transmit has finished
|
|
if ( datalen == 0 && size < EP0_SIZE )
|
|
return;
|
|
|
|
size = datalen;
|
|
if ( size > EP0_SIZE )
|
|
size = EP0_SIZE;
|
|
endpoint0_transmit( data, size );
|
|
data += size;
|
|
datalen -= size;
|
|
|
|
// See if transmit has finished
|
|
if ( datalen == 0 && size < EP0_SIZE )
|
|
return;
|
|
|
|
// Save rest of transfer for later? XXX
|
|
ep0_tx_ptr = data;
|
|
ep0_tx_len = datalen;
|
|
}
|
|
|
|
|
|
//A bulk endpoint's toggle sequence is initialized to DATA0 when the endpoint
|
|
//experiences any configuration event (configuration events are explained in
|
|
//Sections 9.1.1.5 and 9.4.5).
|
|
|
|
//Configuring a device or changing an alternate setting causes all of the status
|
|
//and configuration values associated with endpoints in the affected interfaces
|
|
//to be set to their default values. This includes setting the data toggle of
|
|
//any endpoint using data toggles to the value DATA0.
|
|
|
|
// For endpoints using data toggle, regardless of whether an endpoint has the
|
|
// Halt feature set, a ClearFeature(ENDPOINT_HALT) request always results in the
|
|
// data toggle being reinitialized to DATA0.
|
|
|
|
static void usb_control( uint32_t stat )
|
|
{
|
|
#ifdef UART_DEBUG
|
|
print("CONTROL - ");
|
|
#endif
|
|
bdt_t *b;
|
|
uint32_t pid, size;
|
|
uint8_t *buf;
|
|
const uint8_t *data;
|
|
|
|
b = stat2bufferdescriptor( stat );
|
|
pid = BDT_PID( b->desc );
|
|
buf = b->addr;
|
|
#ifdef UART_DEBUG
|
|
print("pid:");
|
|
printHex(pid);
|
|
print(", count:");
|
|
printHex32(b->desc);
|
|
print(" - ");
|
|
#endif
|
|
|
|
switch ( pid )
|
|
{
|
|
case 0x0D: // Setup received from host
|
|
// grab the 8 byte setup info
|
|
setup.word1 = *(uint32_t *)(buf);
|
|
setup.word2 = *(uint32_t *)(buf + 4);
|
|
|
|
// give the buffer back
|
|
b->desc = BDT_DESC( EP0_SIZE, DATA1 );
|
|
//table[index(0, RX, EVEN)].desc = BDT_DESC(EP0_SIZE, 1);
|
|
//table[index(0, RX, ODD)].desc = BDT_DESC(EP0_SIZE, 1);
|
|
|
|
// clear any leftover pending IN transactions
|
|
ep0_tx_ptr = NULL;
|
|
if ( ep0_tx_data_toggle )
|
|
{
|
|
}
|
|
//if (table[index(0, TX, EVEN)].desc & 0x80) {
|
|
//serial_print("leftover tx even\n");
|
|
//}
|
|
//if (table[index(0, TX, ODD)].desc & 0x80) {
|
|
//serial_print("leftover tx odd\n");
|
|
//}
|
|
table[index(0, TX, EVEN)].desc = 0;
|
|
table[index(0, TX, ODD)].desc = 0;
|
|
|
|
// first IN after Setup is always DATA1
|
|
ep0_tx_data_toggle = 1;
|
|
|
|
#ifdef UART_DEBUG_UNKNOWN
|
|
printHex( stat );
|
|
print(" PID=SETUP wRequestAndType:");
|
|
printHex(setup.wRequestAndType);
|
|
print(", wValue:");
|
|
printHex(setup.wValue);
|
|
print(", wIndex:");
|
|
printHex(setup.wIndex);
|
|
print(", len:");
|
|
printHex(setup.wLength);
|
|
print(" -- ");
|
|
printHex32(setup.word1);
|
|
print(" ");
|
|
printHex32(setup.word2);
|
|
print(": ");
|
|
printInt32( systick_millis_count - USBInit_TimeStart );
|
|
print(" ms");
|
|
print(NL);
|
|
#endif
|
|
|
|
// actually "do" the setup request
|
|
usb_setup();
|
|
// unfreeze the USB, now that we're ready
|
|
USB0_CTL = USB_CTL_USBENSOFEN; // clear TXSUSPENDTOKENBUSY bit
|
|
break;
|
|
|
|
case 0x01: // OUT transaction received from host
|
|
case 0x02:
|
|
#ifdef UART_DEBUG_UNKNOWN
|
|
printHex( stat );
|
|
print(" PID=OUT wRequestAndType:");
|
|
printHex(setup.wRequestAndType);
|
|
print(", wValue:");
|
|
printHex(setup.wValue);
|
|
print(", wIndex:");
|
|
printHex(setup.wIndex);
|
|
print(", len:");
|
|
printHex(setup.wLength);
|
|
print(" -- ");
|
|
printHex32(setup.word1);
|
|
print(" ");
|
|
printHex32(setup.word2);
|
|
print(": ");
|
|
printInt32( systick_millis_count - USBInit_TimeStart );
|
|
print(" ms");
|
|
print(NL);
|
|
#endif
|
|
|
|
// CDC Interface
|
|
#if enableVirtualSerialPort_define == 1
|
|
// CDC_SET_LINE_CODING - PID=OUT
|
|
// XXX - Getting lots of NAKs in Linux
|
|
if ( setup.wRequestAndType == 0x2021 )
|
|
{
|
|
// Copy over new line coding
|
|
memcpy( (void*)&usb_cdc_line_coding, buf, 7 );
|
|
|
|
#ifdef UART_DEBUG
|
|
// - Unused, but for the readers info -
|
|
print("dwDTERate(");
|
|
printInt32( usb_cdc_line_coding.dwDTERate );
|
|
print(")bCharFormat(");
|
|
printHex( usb_cdc_line_coding.bCharFormat );
|
|
print(")bParityType(");
|
|
printHex( usb_cdc_line_coding.bParityType );
|
|
print(")bDataBits(");
|
|
printHex( usb_cdc_line_coding.bDataBits );
|
|
print(")");
|
|
print( NL );
|
|
#endif
|
|
|
|
// XXX ZLP causes timeout/delay, why? -HaaTa
|
|
//endpoint0_transmit( NULL, 0 );
|
|
}
|
|
#endif
|
|
|
|
// Keyboard HID SET_REPORT - PID=OUT
|
|
#if enableKeyboard_define == 1
|
|
// XXX - Getting lots of NAKs in Linux
|
|
if ( setup.wRequestAndType == 0x0921 && setup.wValue & 0x200 )
|
|
{
|
|
#ifdef UART_DEBUG
|
|
print("report_type(");
|
|
printHex( setup.wValue >> 8 );
|
|
print(")report_id(");
|
|
printHex( setup.wValue & 0xFF );
|
|
print(")interface(");
|
|
printHex( setup.wIndex );
|
|
print(")len(");
|
|
printHex( setup.wLength );
|
|
print(")[");
|
|
|
|
for ( size_t len = 0; len < setup.wLength; len++ )
|
|
{
|
|
printHex( buf[ len ] );
|
|
print(" ");
|
|
}
|
|
print("]");
|
|
print( NL );
|
|
#endif
|
|
|
|
// Interface
|
|
switch ( setup.wIndex & 0xFF )
|
|
{
|
|
// Keyboard Interface
|
|
case KEYBOARD_INTERFACE:
|
|
USBKeys_LEDs = buf[0];
|
|
break;
|
|
// NKRO Keyboard Interface
|
|
case NKRO_KEYBOARD_INTERFACE:
|
|
// Already set with the control sequence
|
|
// Only use 2nd byte, first byte is the report id
|
|
USBKeys_LEDs = buf[1];
|
|
break;
|
|
default:
|
|
warn_msg("Unknown interface - ");
|
|
printHex( setup.wIndex );
|
|
print( NL );
|
|
break;
|
|
}
|
|
|
|
// XXX ZLP causes timeout/delay, why? -HaaTa
|
|
//endpoint0_transmit( NULL, 0 );
|
|
}
|
|
#endif
|
|
|
|
// give the buffer back
|
|
b->desc = BDT_DESC( EP0_SIZE, DATA1 );
|
|
break;
|
|
|
|
case 0x09: // IN transaction completed to host
|
|
data = ep0_tx_ptr;
|
|
|
|
#ifdef UART_DEBUG_UNKNOWN
|
|
printHex( stat );
|
|
print(" PID=IN wRequestAndType:");
|
|
printHex(setup.wRequestAndType);
|
|
print(", wValue:");
|
|
printHex(setup.wValue);
|
|
print(", wIndex:");
|
|
printHex(setup.wIndex);
|
|
print(", len:");
|
|
printHex(setup.wLength);
|
|
print(" -- ");
|
|
printHex32(setup.word1);
|
|
print(" ");
|
|
printHex32(setup.word2);
|
|
print(": ");
|
|
printInt32( systick_millis_count - USBInit_TimeStart );
|
|
print(" ms");
|
|
if ( data ) print(" DATA ");
|
|
print(NL);
|
|
#endif
|
|
|
|
// send remaining data, if any...
|
|
if ( data )
|
|
{
|
|
size = ep0_tx_len;
|
|
if (size > EP0_SIZE)
|
|
{
|
|
size = EP0_SIZE;
|
|
}
|
|
endpoint0_transmit( data, size );
|
|
data += size;
|
|
ep0_tx_len -= size;
|
|
ep0_tx_ptr = (ep0_tx_len > 0 || size == EP0_SIZE) ? data : NULL;
|
|
}
|
|
|
|
if ( setup.bRequest == 5 && setup.bmRequestType == 0 )
|
|
{
|
|
setup.bRequest = 0;
|
|
#ifdef UART_DEBUG
|
|
print("set address: ");
|
|
printHex(setup.wValue);
|
|
print(NL);
|
|
#endif
|
|
USB0_ADDR = setup.wValue;
|
|
}
|
|
|
|
// CDC_SET_LINE_CODING - PID=IN
|
|
#if enableVirtualSerialPort_define == 1
|
|
if ( setup.wRequestAndType == 0x2021 )
|
|
{
|
|
// XXX ZLP causes timeout/delay, why? -HaaTa
|
|
//endpoint0_transmit( NULL, 0 );
|
|
}
|
|
#endif
|
|
|
|
// Keyboard HID SET_REPORT - PID=IN
|
|
#if enableKeyboard_define == 1
|
|
// XXX - Getting lots of NAKs in Linux
|
|
if ( setup.wRequestAndType == 0x0921 && setup.wValue & 0x200 )
|
|
{
|
|
// XXX ZLP causes timeout/delay, why? -HaaTa
|
|
//endpoint0_transmit( NULL, 0 );
|
|
}
|
|
#endif
|
|
|
|
break;
|
|
|
|
default:
|
|
#ifdef UART_DEBUG_UNKNOWN
|
|
print("PID=unknown: ");
|
|
printHex(pid);
|
|
print(": ");
|
|
printInt32( systick_millis_count - USBInit_TimeStart );
|
|
print(" ms");
|
|
print(NL);
|
|
#endif
|
|
break;
|
|
}
|
|
USB0_CTL = USB_CTL_USBENSOFEN; // clear TXSUSPENDTOKENBUSY bit
|
|
}
|
|
|
|
usb_packet_t *usb_rx( uint32_t endpoint )
|
|
{
|
|
//print("USB RX");
|
|
usb_packet_t *ret;
|
|
endpoint--;
|
|
|
|
// Make sure this is a valid endpoint
|
|
if ( endpoint >= NUM_ENDPOINTS )
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
__disable_irq();
|
|
|
|
// Receive packet, check pointer
|
|
ret = rx_first[endpoint];
|
|
if ( ret )
|
|
{
|
|
rx_first[ endpoint ] = ret->next;
|
|
usb_rx_byte_count_data[ endpoint ] -= ret->len;
|
|
}
|
|
|
|
__enable_irq();
|
|
|
|
//serial_print("rx, epidx=");
|
|
//serial_phex(endpoint);
|
|
//serial_print(", packet=");
|
|
//serial_phex32(ret);
|
|
//serial_print("\n");
|
|
return ret;
|
|
}
|
|
|
|
static uint32_t usb_queue_byte_count( const usb_packet_t *p )
|
|
{
|
|
uint32_t count=0;
|
|
|
|
__disable_irq();
|
|
for ( ; p; p = p->next )
|
|
{
|
|
count += p->len;
|
|
}
|
|
__enable_irq();
|
|
return count;
|
|
}
|
|
|
|
uint32_t usb_tx_byte_count( uint32_t endpoint )
|
|
{
|
|
endpoint--;
|
|
if ( endpoint >= NUM_ENDPOINTS )
|
|
return 0;
|
|
return usb_queue_byte_count( tx_first[ endpoint ] );
|
|
}
|
|
|
|
uint32_t usb_tx_packet_count( uint32_t endpoint )
|
|
{
|
|
const usb_packet_t *p;
|
|
uint32_t count=0;
|
|
|
|
endpoint--;
|
|
if ( endpoint >= NUM_ENDPOINTS )
|
|
return 0;
|
|
__disable_irq();
|
|
for ( p = tx_first[ endpoint ]; p; p = p->next )
|
|
count++;
|
|
__enable_irq();
|
|
return count;
|
|
}
|
|
|
|
|
|
// Called from usb_free, but only when usb_rx_memory_needed > 0, indicating
|
|
// receive endpoints are starving for memory. The intention is to give
|
|
// endpoints needing receive memory priority over the user's code, which is
|
|
// likely calling usb_malloc to obtain memory for transmitting. When the
|
|
// user is creating data very quickly, their consumption could starve reception
|
|
// without this prioritization. The packet buffer (input) is assigned to the
|
|
// first endpoint needing memory.
|
|
//
|
|
void usb_rx_memory( usb_packet_t *packet )
|
|
{
|
|
//print("USB RX MEMORY");
|
|
unsigned int i;
|
|
const uint8_t *cfg;
|
|
|
|
cfg = usb_endpoint_config_table;
|
|
//serial_print("rx_mem:");
|
|
__disable_irq();
|
|
for ( i = 1; i <= NUM_ENDPOINTS; i++ )
|
|
{
|
|
if ( *cfg++ & USB_ENDPT_EPRXEN )
|
|
{
|
|
if ( table[ index( i, RX, EVEN ) ].desc == 0 )
|
|
{
|
|
table[ index( i, RX, EVEN ) ].addr = packet->buf;
|
|
table[ index( i, RX, EVEN ) ].desc = BDT_DESC( 64, 0 );
|
|
usb_rx_memory_needed--;
|
|
__enable_irq();
|
|
//serial_phex(i);
|
|
//serial_print(",even\n");
|
|
return;
|
|
}
|
|
if ( table[ index( i, RX, ODD ) ].desc == 0 )
|
|
{
|
|
table[ index( i, RX, ODD ) ].addr = packet->buf;
|
|
table[ index( i, RX, ODD ) ].desc = BDT_DESC( 64, 1 );
|
|
usb_rx_memory_needed--;
|
|
__enable_irq();
|
|
//serial_phex(i);
|
|
//serial_print(",odd\n");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
__enable_irq();
|
|
// we should never reach this point. If we get here, it means
|
|
// usb_rx_memory_needed was set greater than zero, but no memory
|
|
// was actually needed.
|
|
usb_rx_memory_needed = 0;
|
|
usb_free( packet );
|
|
return;
|
|
}
|
|
|
|
// Call whenever there's an action that may wake the host device
|
|
void usb_resume()
|
|
{
|
|
// If we have been sleeping, try to wake up host
|
|
if ( usb_dev_sleep && usb_configured() )
|
|
{
|
|
#if enableUSBResume_define == 1
|
|
#if enableVirtualSerialPort_define != 1
|
|
info_print("Attempting to resume the host");
|
|
#endif
|
|
// Force wake-up for 10 ms
|
|
// According to the USB Spec a device must hold resume for at least 1 ms but no more than 15 ms
|
|
USB0_CTL |= USB_CTL_RESUME;
|
|
delay(10);
|
|
USB0_CTL &= ~(USB_CTL_RESUME);
|
|
delay(50); // Wait for at least 50 ms to make sure the bus is clear
|
|
usb_dev_sleep = 0; // Make sure we don't call this again, may crash system
|
|
#else
|
|
warn_print("Host Resume Disabled");
|
|
#endif
|
|
}
|
|
|
|
}
|
|
|
|
void usb_tx( uint32_t endpoint, usb_packet_t *packet )
|
|
{
|
|
// Update expiry counter
|
|
USBKeys_Idle_Expiry = systick_millis_count;
|
|
|
|
// Since we are transmitting data, USB will be brought out of sleep/suspend
|
|
// if it's in that state
|
|
// Use the currently set descriptor value
|
|
Output_update_usb_current( *usb_bMaxPower * 2 );
|
|
|
|
bdt_t *b = &table[ index( endpoint, TX, EVEN ) ];
|
|
uint8_t next;
|
|
|
|
endpoint--;
|
|
if ( endpoint >= NUM_ENDPOINTS )
|
|
return;
|
|
__disable_irq();
|
|
//serial_print("txstate=");
|
|
//serial_phex(tx_state[ endpoint ]);
|
|
//serial_print("\n");
|
|
switch ( tx_state[ endpoint ] )
|
|
{
|
|
case TX_STATE_BOTH_FREE_EVEN_FIRST:
|
|
next = TX_STATE_ODD_FREE;
|
|
break;
|
|
case TX_STATE_BOTH_FREE_ODD_FIRST:
|
|
b++;
|
|
next = TX_STATE_EVEN_FREE;
|
|
break;
|
|
case TX_STATE_EVEN_FREE:
|
|
next = TX_STATE_NONE_FREE_ODD_FIRST;
|
|
break;
|
|
case TX_STATE_ODD_FREE:
|
|
b++;
|
|
next = TX_STATE_NONE_FREE_EVEN_FIRST;
|
|
break;
|
|
default:
|
|
if (tx_first[ endpoint ] == NULL)
|
|
{
|
|
tx_first[ endpoint ] = packet;
|
|
}
|
|
else
|
|
{
|
|
tx_last[ endpoint ]->next = packet;
|
|
}
|
|
tx_last[ endpoint ] = packet;
|
|
__enable_irq();
|
|
return;
|
|
}
|
|
|
|
tx_state[ endpoint ] = next;
|
|
b->addr = packet->buf;
|
|
b->desc = BDT_DESC( packet->len, ((uint32_t)b & 8) ? DATA1 : DATA0 );
|
|
__enable_irq();
|
|
}
|
|
|
|
|
|
void usb_device_reload()
|
|
{
|
|
// MCHCK
|
|
// Kiibohd mk20dx256vlh7
|
|
#if defined(_mk20dx128vlf5_) || defined(_mk20dx256vlh7_)
|
|
// Copies variable into the VBAT register, must be identical to the variable in the bootloader to jump to the bootloader flash mode
|
|
for ( int pos = 0; pos < sizeof(sys_reset_to_loader_magic); pos++ )
|
|
(&VBAT)[ pos ] = sys_reset_to_loader_magic[ pos ];
|
|
SOFTWARE_RESET();
|
|
|
|
// Teensy 3.0 and 3.1
|
|
#else
|
|
asm volatile("bkpt");
|
|
#endif
|
|
}
|
|
|
|
|
|
void usb_isr()
|
|
{
|
|
uint8_t status, stat, t;
|
|
|
|
restart:
|
|
status = USB0_ISTAT;
|
|
/*
|
|
print(" ISR(");
|
|
printHex( status );
|
|
print(") ");
|
|
*/
|
|
|
|
if ( (status & USB_INTEN_SOFTOKEN /* 04 */ ) )
|
|
{
|
|
if ( usb_configuration )
|
|
{
|
|
t = usb_reboot_timer;
|
|
if ( t )
|
|
{
|
|
usb_reboot_timer = --t;
|
|
if ( !t )
|
|
usb_device_reload();
|
|
}
|
|
|
|
// CDC Interface
|
|
#if enableVirtualSerialPort_define == 1
|
|
t = usb_cdc_transmit_flush_timer;
|
|
if ( t )
|
|
{
|
|
usb_cdc_transmit_flush_timer = --t;
|
|
if ( t == 0 )
|
|
usb_serial_flush_callback();
|
|
}
|
|
#endif
|
|
|
|
}
|
|
USB0_ISTAT = USB_INTEN_SOFTOKEN;
|
|
}
|
|
|
|
if ( (status & USB_ISTAT_TOKDNE /* 08 */ ) )
|
|
{
|
|
uint8_t endpoint;
|
|
stat = USB0_STAT;
|
|
//serial_print("token: ep=");
|
|
//serial_phex(stat >> 4);
|
|
//serial_print(stat & 0x08 ? ",tx" : ",rx");
|
|
//serial_print(stat & 0x04 ? ",odd\n" : ",even\n");
|
|
endpoint = stat >> 4;
|
|
if ( endpoint == 0 )
|
|
{
|
|
usb_control( stat );
|
|
}
|
|
else
|
|
{
|
|
bdt_t *b = stat2bufferdescriptor(stat);
|
|
usb_packet_t *packet = (usb_packet_t *)((uint8_t *)(b->addr) - 8);
|
|
#if 0
|
|
serial_print("ep:");
|
|
serial_phex(endpoint);
|
|
serial_print(", pid:");
|
|
serial_phex(BDT_PID(b->desc));
|
|
serial_print(((uint32_t)b & 8) ? ", odd" : ", even");
|
|
serial_print(", count:");
|
|
serial_phex(b->desc >> 16);
|
|
serial_print("\n");
|
|
#endif
|
|
endpoint--; // endpoint is index to zero-based arrays
|
|
|
|
if ( stat & 0x08 )
|
|
{ // transmit
|
|
usb_free( packet );
|
|
packet = tx_first[ endpoint ];
|
|
if ( packet )
|
|
{
|
|
//serial_print("tx packet\n");
|
|
tx_first[endpoint] = packet->next;
|
|
b->addr = packet->buf;
|
|
switch ( tx_state[ endpoint ] )
|
|
{
|
|
case TX_STATE_BOTH_FREE_EVEN_FIRST:
|
|
tx_state[ endpoint ] = TX_STATE_ODD_FREE;
|
|
break;
|
|
case TX_STATE_BOTH_FREE_ODD_FIRST:
|
|
tx_state[ endpoint ] = TX_STATE_EVEN_FREE;
|
|
break;
|
|
case TX_STATE_EVEN_FREE:
|
|
tx_state[ endpoint ] = TX_STATE_NONE_FREE_ODD_FIRST;
|
|
break;
|
|
case TX_STATE_ODD_FREE:
|
|
tx_state[ endpoint ] = TX_STATE_NONE_FREE_EVEN_FIRST;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
b->desc = BDT_DESC( packet->len, ((uint32_t)b & 8) ? DATA1 : DATA0 );
|
|
} else {
|
|
//serial_print("tx no packet\n");
|
|
switch ( tx_state[ endpoint ] )
|
|
{
|
|
case TX_STATE_BOTH_FREE_EVEN_FIRST:
|
|
case TX_STATE_BOTH_FREE_ODD_FIRST:
|
|
break;
|
|
case TX_STATE_EVEN_FREE:
|
|
tx_state[ endpoint ] = TX_STATE_BOTH_FREE_EVEN_FIRST;
|
|
break;
|
|
case TX_STATE_ODD_FREE:
|
|
tx_state[ endpoint ] = TX_STATE_BOTH_FREE_ODD_FIRST;
|
|
break;
|
|
default:
|
|
tx_state[ endpoint ] = ((uint32_t)b & 8)
|
|
? TX_STATE_ODD_FREE
|
|
: TX_STATE_EVEN_FREE;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{ // receive
|
|
packet->len = b->desc >> 16;
|
|
if ( packet->len > 0 )
|
|
{
|
|
packet->index = 0;
|
|
packet->next = NULL;
|
|
if ( rx_first[ endpoint ] == NULL )
|
|
{
|
|
//serial_print("rx 1st, epidx=");
|
|
//serial_phex(endpoint);
|
|
//serial_print(", packet=");
|
|
//serial_phex32((uint32_t)packet);
|
|
//serial_print("\n");
|
|
rx_first[ endpoint ] = packet;
|
|
}
|
|
else
|
|
{
|
|
//serial_print("rx Nth, epidx=");
|
|
//serial_phex(endpoint);
|
|
//serial_print(", packet=");
|
|
//serial_phex32((uint32_t)packet);
|
|
//serial_print("\n");
|
|
rx_last[ endpoint ]->next = packet;
|
|
}
|
|
rx_last[ endpoint ] = packet;
|
|
usb_rx_byte_count_data[ endpoint ] += packet->len;
|
|
// TODO: implement a per-endpoint maximum # of allocated packets
|
|
// so a flood of incoming data on 1 endpoint doesn't starve
|
|
// the others if the user isn't reading it regularly
|
|
packet = usb_malloc();
|
|
if ( packet )
|
|
{
|
|
b->addr = packet->buf;
|
|
b->desc = BDT_DESC( 64, ((uint32_t)b & 8) ? DATA1 : DATA0 );
|
|
}
|
|
else
|
|
{
|
|
//serial_print("starving ");
|
|
//serial_phex(endpoint + 1);
|
|
//serial_print(((uint32_t)b & 8) ? ",odd\n" : ",even\n");
|
|
b->desc = 0;
|
|
usb_rx_memory_needed++;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
b->desc = BDT_DESC( 64, ((uint32_t)b & 8) ? DATA1 : DATA0 );
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
}
|
|
USB0_ISTAT = USB_ISTAT_TOKDNE;
|
|
goto restart;
|
|
}
|
|
|
|
|
|
if ( status & USB_ISTAT_USBRST /* 01 */ )
|
|
{
|
|
//serial_print("reset\n");
|
|
|
|
// initialize BDT toggle bits
|
|
USB0_CTL = USB_CTL_ODDRST;
|
|
ep0_tx_bdt_bank = 0;
|
|
|
|
// set up buffers to receive Setup and OUT packets
|
|
table[index( 0, RX, EVEN ) ].desc = BDT_DESC( EP0_SIZE, 0 );
|
|
table[index( 0, RX, EVEN ) ].addr = ep0_rx0_buf;
|
|
table[index( 0, RX, ODD ) ].desc = BDT_DESC( EP0_SIZE, 0 );
|
|
table[index( 0, RX, ODD ) ].addr = ep0_rx1_buf;
|
|
table[index( 0, TX, EVEN ) ].desc = 0;
|
|
table[index( 0, TX, ODD ) ].desc = 0;
|
|
|
|
// activate endpoint 0
|
|
USB0_ENDPT0 = USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
|
|
|
|
// clear all ending interrupts
|
|
USB0_ERRSTAT = 0xFF;
|
|
USB0_ISTAT = 0xFF;
|
|
|
|
// set the address to zero during enumeration
|
|
USB0_ADDR = 0;
|
|
|
|
// enable other interrupts
|
|
USB0_ERREN = 0xFF;
|
|
USB0_INTEN = USB_INTEN_TOKDNEEN |
|
|
USB_INTEN_SOFTOKEN |
|
|
USB_INTEN_STALLEN |
|
|
USB_INTEN_ERROREN |
|
|
USB_INTEN_USBRSTEN |
|
|
USB_INTEN_RESUMEEN |
|
|
USB_INTEN_SLEEPEN;
|
|
|
|
// is this necessary?
|
|
USB0_CTL = USB_CTL_USBENSOFEN;
|
|
return;
|
|
}
|
|
|
|
|
|
if ( (status & USB_ISTAT_STALL /* 80 */ ) )
|
|
{
|
|
//serial_print("stall:\n");
|
|
USB0_ENDPT0 = USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
|
|
USB0_ISTAT = USB_ISTAT_STALL;
|
|
}
|
|
if ( (status & USB_ISTAT_ERROR /* 02 */ ) )
|
|
{
|
|
uint8_t err = USB0_ERRSTAT;
|
|
USB0_ERRSTAT = err;
|
|
//serial_print("err:");
|
|
//serial_phex(err);
|
|
//serial_print("\n");
|
|
USB0_ISTAT = USB_ISTAT_ERROR;
|
|
}
|
|
|
|
// USB Host signalling device to enter 'sleep' state
|
|
// The USB Module triggers this interrupt when it detects the bus has been idle for 3 ms
|
|
if ( (status & USB_ISTAT_SLEEP /* 10 */ ) )
|
|
{
|
|
#if enableUSBSuspend_define == 1
|
|
// Can cause issues with the virtual serial port
|
|
#if enableVirtualSerialPort_define != 1
|
|
info_print("Host has requested USB sleep/suspend state");
|
|
#endif
|
|
Output_update_usb_current( 100 ); // Set to 100 mA
|
|
usb_dev_sleep = 1;
|
|
#else
|
|
info_print("USB Suspend Detected - Firmware USB Suspend Disabled");
|
|
#endif
|
|
USB0_ISTAT |= USB_ISTAT_SLEEP;
|
|
}
|
|
|
|
// On USB Resume, unset the usb_dev_sleep so we don't keep sending resume signals
|
|
if ( (status & USB_ISTAT_RESUME /* 20 */ ) )
|
|
{
|
|
// Can cause issues with the virtual serial port
|
|
#if enableVirtualSerialPort_define != 1
|
|
info_print("Host has woken-up/resumed from sleep/suspend state");
|
|
#endif
|
|
Output_update_usb_current( *usb_bMaxPower * 2 );
|
|
usb_dev_sleep = 0;
|
|
USB0_ISTAT |= USB_ISTAT_RESUME;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
uint8_t usb_init()
|
|
{
|
|
#ifdef UART_DEBUG
|
|
print("USB INIT"NL);
|
|
#endif
|
|
|
|
USBInit_TimeStart = systick_millis_count;
|
|
USBInit_Ticks = 0;
|
|
|
|
// XXX Set wTotalLength here instead of using defines
|
|
// Simplifies defines considerably
|
|
usb_set_config_descriptor_size();
|
|
|
|
#if defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_)
|
|
// Write the unique id to the USB Descriptor memory location
|
|
// It's split up into 4 32 bit registers
|
|
// 1) Read out register
|
|
// 2) Convert to UTF-16-LE
|
|
// 3) Write to USB Descriptor Memory (space is pre-allocated)
|
|
extern struct usb_string_descriptor_struct usb_string_serial_number_default;
|
|
hex32ToStr16( SIM_UIDH, &(usb_string_serial_number_default.wString[0]), 8 );
|
|
hex32ToStr16( SIM_UIDMH, &(usb_string_serial_number_default.wString[8]), 8 );
|
|
hex32ToStr16( SIM_UIDML, &(usb_string_serial_number_default.wString[16]), 8 );
|
|
hex32ToStr16( SIM_UIDL, &(usb_string_serial_number_default.wString[24]), 8 );
|
|
#endif
|
|
|
|
// Clear out endpoints table
|
|
for ( int i = 0; i <= NUM_ENDPOINTS * 4; i++ )
|
|
{
|
|
table[i].desc = 0;
|
|
table[i].addr = 0;
|
|
}
|
|
|
|
// this basically follows the flowchart in the Kinetis
|
|
// Quick Reference User Guide, Rev. 1, 03/2012, page 141
|
|
|
|
// assume 48 MHz clock already running
|
|
// SIM - enable clock
|
|
SIM_SCGC4 |= SIM_SCGC4_USBOTG;
|
|
|
|
// reset USB module
|
|
USB0_USBTRC0 = USB_USBTRC_USBRESET;
|
|
while ( (USB0_USBTRC0 & USB_USBTRC_USBRESET) != 0 ); // wait for reset to end
|
|
|
|
// set desc table base addr
|
|
USB0_BDTPAGE1 = ((uint32_t)table) >> 8;
|
|
USB0_BDTPAGE2 = ((uint32_t)table) >> 16;
|
|
USB0_BDTPAGE3 = ((uint32_t)table) >> 24;
|
|
|
|
// clear all ISR flags
|
|
USB0_ISTAT = 0xFF;
|
|
USB0_ERRSTAT = 0xFF;
|
|
USB0_OTGISTAT = 0xFF;
|
|
|
|
USB0_USBTRC0 |= 0x40; // undocumented bit
|
|
|
|
// enable USB
|
|
USB0_CTL = USB_CTL_USBENSOFEN;
|
|
USB0_USBCTRL = 0;
|
|
|
|
// enable reset interrupt
|
|
USB0_INTEN = USB_INTEN_USBRSTEN;
|
|
|
|
// enable interrupt in NVIC...
|
|
NVIC_SET_PRIORITY( IRQ_USBOTG, 112 );
|
|
NVIC_ENABLE_IRQ( IRQ_USBOTG );
|
|
|
|
// enable d+ pullup
|
|
USB0_CONTROL = USB_CONTROL_DPPULLUPNONOTG;
|
|
|
|
// Do not check for power negotiation delay until Get Configuration Descriptor
|
|
power_neg_delay = 0;
|
|
|
|
// During initialization host isn't sleeping
|
|
usb_dev_sleep = 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
// return 0 if the USB is not configured, or the configuration
|
|
// number selected by the HOST
|
|
uint8_t usb_configured()
|
|
{
|
|
return usb_configuration;
|
|
}
|
|
|