Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Bootloader/Scripts/swdLoad.bash
Dan McGregor 0e6f107ea1 Start removing select Linux-isms
bash might not be in /bin. Don't expect it there.
2015-10-20 08:48:59 -06:00

34 lines
1.1 KiB
Bash
Executable File

#!/usr/bin/env bash
# Loads firmware image using an SWD Flasher
# Uses MCHCK ruby flasher toolchain
# NOTE: Only tested with a buspirate on Linux
# Arg 1: Path to firmware image
# Arg 2: Address to flash to (byte address)
# Must have two args
if [ "$#" -ne 2 ]; then
echo "Usage: `basename $0` <firmware binary> <starting address>"
echo "Example: `basename $0` kiibohd_bootloader.bin 0"
exit 1
fi
# First check to see if the flasher toolchain is available
if [ ! -d "programmer" ]; then
# Use git to download the toolchain
git clone https://github.com/mchck/programmer.git
fi
# Make sure the toolchain is up to date
cd programmer
#git pull --rebase
cd ..
# Attempt to flash
# Udev rules have been applied to name the buspirate as /dev/buspirate (instead of something like /dev/ttyUSB0)
# By default only root can access serial devices on Linux
#ruby programmer/flash.rb name=buspirate:dev=/dev/buspirate --mass-erase
ruby programmer/flash.rb name=buspirate:dev=/dev/buspirate "$1" "$2"
#ruby programmer/flash.rb name=buspirate:dev=/dev/buspirate --mass-erase "$1" "$2"