628 lines
23 KiB
C
628 lines
23 KiB
C
/* USB Keyboard and CDC Serial Device for Teensy USB Development Board
|
|
* Copyright (c) 2009 PJRC.COM, LLC
|
|
* Modifications by Jacob Alexander (2011-2014)
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#ifndef usb_keyboard_serial_h__
|
|
#define usb_keyboard_serial_h__
|
|
|
|
// Compiler Includes
|
|
#include <stdint.h>
|
|
|
|
// AVR Includes
|
|
#include <avr/io.h>
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/interrupt.h>
|
|
#include <avr/wdt.h>
|
|
|
|
// AVR Util Includes
|
|
#include <util/delay.h>
|
|
|
|
// Local Includes
|
|
#include "output_com.h"
|
|
|
|
|
|
// ----- Function Declarations -----
|
|
|
|
// Basic USB Configuration
|
|
void usb_init(void); // initialize everything
|
|
uint8_t usb_configured(void); // is the USB port configured
|
|
|
|
// Keyboard HID Functions
|
|
int8_t usb_keyboard_send(void);
|
|
|
|
// Chip Level Functions
|
|
void usb_device_reload(); // Enable firmware reflash mode
|
|
void wdt_init(void) __attribute__((naked)) __attribute__((section(".init3"))); // Needed for software reset
|
|
|
|
// USB Serial CDC Functions
|
|
int16_t usb_serial_getchar(void); // receive a character (-1 if timeout/error)
|
|
uint8_t usb_serial_available(void); // number of bytes in receive buffer
|
|
void usb_serial_flush_input(void); // discard any buffered input
|
|
|
|
// transmitting data
|
|
int8_t usb_serial_putchar(uint8_t c); // transmit a character
|
|
int8_t usb_serial_putchar_nowait(uint8_t c); // transmit a character, do not wait
|
|
int8_t usb_serial_write(const char *buffer, uint16_t size); // transmit a buffer
|
|
void usb_serial_flush_output(void); // immediately transmit any buffered output
|
|
|
|
// serial parameters
|
|
uint32_t usb_serial_get_baud(void); // get the baud rate
|
|
uint8_t usb_serial_get_stopbits(void); // get the number of stop bits
|
|
uint8_t usb_serial_get_paritytype(void);// get the parity type
|
|
uint8_t usb_serial_get_numbits(void); // get the number of data bits
|
|
uint8_t usb_serial_get_control(void); // get the RTS and DTR signal state
|
|
int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc
|
|
|
|
|
|
|
|
// ----- Macros -----
|
|
|
|
// Software reset the chip
|
|
#define usb_device_software_reset() do { wdt_enable( WDTO_15MS ); for(;;); } while(0)
|
|
|
|
// See EPSIZE -> UECFG1X - 128 and 256 bytes are for endpoint 1 only
|
|
#define EP_SIZE(s) ((s) == 256 ? 0x50 : \
|
|
((s) == 128 ? 0x40 : \
|
|
((s) == 64 ? 0x30 : \
|
|
((s) == 32 ? 0x20 : \
|
|
((s) == 16 ? 0x10 : \
|
|
0x00)))))
|
|
|
|
#define LSB(n) (n & 255)
|
|
#define MSB(n) ((n >> 8) & 255)
|
|
|
|
|
|
|
|
// ----- Defines -----
|
|
|
|
// constants corresponding to the various serial parameters
|
|
#define USB_SERIAL_DTR 0x01
|
|
#define USB_SERIAL_RTS 0x02
|
|
#define USB_SERIAL_1_STOP 0
|
|
#define USB_SERIAL_1_5_STOP 1
|
|
#define USB_SERIAL_2_STOP 2
|
|
#define USB_SERIAL_PARITY_NONE 0
|
|
#define USB_SERIAL_PARITY_ODD 1
|
|
#define USB_SERIAL_PARITY_EVEN 2
|
|
#define USB_SERIAL_PARITY_MARK 3
|
|
#define USB_SERIAL_PARITY_SPACE 4
|
|
#define USB_SERIAL_DCD 0x01
|
|
#define USB_SERIAL_DSR 0x02
|
|
#define USB_SERIAL_BREAK 0x04
|
|
#define USB_SERIAL_RI 0x08
|
|
#define USB_SERIAL_FRAME_ERR 0x10
|
|
#define USB_SERIAL_PARITY_ERR 0x20
|
|
#define USB_SERIAL_OVERRUN_ERR 0x40
|
|
|
|
#define EP_TYPE_CONTROL 0x00
|
|
#define EP_TYPE_BULK_IN 0x81
|
|
#define EP_TYPE_BULK_OUT 0x80
|
|
#define EP_TYPE_INTERRUPT_IN 0xC1
|
|
#define EP_TYPE_INTERRUPT_OUT 0xC0
|
|
#define EP_TYPE_ISOCHRONOUS_IN 0x41
|
|
#define EP_TYPE_ISOCHRONOUS_OUT 0x40
|
|
|
|
#define EP_SINGLE_BUFFER 0x02
|
|
#define EP_DOUBLE_BUFFER 0x06
|
|
|
|
#define MAX_ENDPOINT 4
|
|
|
|
#if defined(__AVR_AT90USB162__)
|
|
#define HW_CONFIG()
|
|
#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
|
|
#define USB_CONFIG() (USBCON = (1<<USBE))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
|
|
#elif defined(__AVR_ATmega32U4__)
|
|
#define HW_CONFIG() (UHWCON = 0x01)
|
|
#define PLL_CONFIG() (PLLCSR = 0x12)
|
|
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
|
|
#elif defined(__AVR_AT90USB646__)
|
|
#define HW_CONFIG() (UHWCON = 0x81)
|
|
#define PLL_CONFIG() (PLLCSR = 0x1A)
|
|
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
|
|
#elif defined(__AVR_AT90USB1286__)
|
|
#define HW_CONFIG() (UHWCON = 0x81)
|
|
#define PLL_CONFIG() (PLLCSR = 0x16)
|
|
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
#endif
|
|
|
|
// standard control endpoint request types
|
|
#define GET_STATUS 0
|
|
#define CLEAR_FEATURE 1
|
|
#define SET_FEATURE 3
|
|
#define SET_ADDRESS 5
|
|
#define GET_DESCRIPTOR 6
|
|
#define GET_CONFIGURATION 8
|
|
#define SET_CONFIGURATION 9
|
|
#define GET_INTERFACE 10
|
|
#define SET_INTERFACE 11
|
|
|
|
// HID (human interface device)
|
|
#define HID_GET_REPORT 1
|
|
#define HID_GET_IDLE 2
|
|
#define HID_GET_PROTOCOL 3
|
|
#define HID_SET_REPORT 9
|
|
#define HID_SET_IDLE 10
|
|
#define HID_SET_PROTOCOL 11
|
|
|
|
// CDC (communication class device)
|
|
#define CDC_SET_LINE_CODING 0x20
|
|
#define CDC_GET_LINE_CODING 0x21
|
|
#define CDC_SET_CONTROL_LINE_STATE 0x22
|
|
|
|
// CDC Configuration
|
|
// When you write data, it goes into a USB endpoint buffer, which
|
|
// is transmitted to the PC when it becomes full, or after a timeout
|
|
// with no more writes. Even if you write in exactly packet-size
|
|
// increments, this timeout is used to send a "zero length packet"
|
|
// that tells the PC no more data is expected and it should pass
|
|
// any buffered data to the application that may be waiting. If
|
|
// you want data sent immediately, call usb_serial_flush_output().
|
|
#define TRANSMIT_FLUSH_TIMEOUT 5 /* in milliseconds */
|
|
|
|
// If the PC is connected but not "listening", this is the length
|
|
// of time before usb_serial_getchar() returns with an error. This
|
|
// is roughly equivilant to a real UART simply transmitting the
|
|
// bits on a wire where nobody is listening, except you get an error
|
|
// code which you can ignore for serial-like discard of data, or
|
|
// use to know your data wasn't sent.
|
|
#define TRANSMIT_TIMEOUT 25 /* in milliseconds */
|
|
|
|
|
|
|
|
// ----- Endpoint Configuration -----
|
|
|
|
#define ENDPOINT0_SIZE 32
|
|
|
|
#define KEYBOARD_NKRO_INTERFACE 0
|
|
#define KEYBOARD_NKRO_ENDPOINT 1
|
|
#define KEYBOARD_NKRO_SIZE 16
|
|
#define KEYBOARD_NKRO_HID_BUFFER EP_DOUBLE_BUFFER
|
|
|
|
#define KEYBOARD_INTERFACE 1
|
|
#define KEYBOARD_ENDPOINT 2
|
|
#define KEYBOARD_SIZE 8
|
|
#define KEYBOARD_HID_BUFFER EP_DOUBLE_BUFFER
|
|
|
|
#define CDC_IAD_DESCRIPTOR 1
|
|
#define CDC_STATUS_INTERFACE 2
|
|
#define CDC_DATA_INTERFACE 3
|
|
#define CDC_ACM_ENDPOINT 3
|
|
#define CDC_RX_ENDPOINT 4
|
|
#define CDC_TX_ENDPOINT 5
|
|
#if defined(__AVR_AT90USB162__)
|
|
#define CDC_ACM_SIZE 16
|
|
#define CDC_ACM_BUFFER EP_SINGLE_BUFFER
|
|
#define CDC_RX_SIZE 32
|
|
#define CDC_RX_BUFFER EP_DOUBLE_BUFFER
|
|
#define CDC_TX_SIZE 32
|
|
#define CDC_TX_BUFFER EP_DOUBLE_BUFFER
|
|
#else
|
|
#define CDC_ACM_SIZE 16
|
|
#define CDC_ACM_BUFFER EP_SINGLE_BUFFER
|
|
#define CDC_RX_SIZE 64
|
|
#define CDC_RX_BUFFER EP_DOUBLE_BUFFER
|
|
#define CDC_TX_SIZE 64
|
|
#define CDC_TX_BUFFER EP_DOUBLE_BUFFER
|
|
#endif
|
|
|
|
// Endpoint 0 is reserved for the control endpoint
|
|
// Endpoint 1 has a 256 byte buffer
|
|
// Endpoints 2-6 have 64 byte buffers
|
|
static const uint8_t PROGMEM endpoint_config_table[] = {
|
|
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_NKRO_SIZE) | KEYBOARD_NKRO_HID_BUFFER, // 256 byte
|
|
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_HID_BUFFER, // 64 byte
|
|
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(CDC_ACM_SIZE) | CDC_ACM_BUFFER, // 64 byte
|
|
1, EP_TYPE_BULK_OUT, EP_SIZE(CDC_RX_SIZE) | CDC_RX_BUFFER, // 64 byte
|
|
1, EP_TYPE_BULK_IN, EP_SIZE(CDC_TX_SIZE) | CDC_TX_BUFFER, // 64 byte
|
|
0, // 64 byte
|
|
};
|
|
|
|
|
|
|
|
// ----- Descriptor Configuration -----
|
|
|
|
// Descriptors are the data that your computer reads when it auto-detects
|
|
// this USB device (called "enumeration" in USB lingo). The most commonly
|
|
// changed items are editable at the top of this file. Changing things
|
|
// in here should only be done by those who've read chapter 9 of the USB
|
|
// spec and relevant portions of any USB class specifications!
|
|
|
|
|
|
static const uint8_t PROGMEM device_descriptor[] = {
|
|
18, // bLength
|
|
1, // bDescriptorType
|
|
0x00, 0x02, // bcdUSB
|
|
0, // bDeviceClass
|
|
0, // bDeviceSubClass
|
|
0, // bDeviceProtocol
|
|
ENDPOINT0_SIZE, // bMaxPacketSize0
|
|
LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
|
|
LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
|
|
0x00, 0x01, // bcdDevice
|
|
1, // iManufacturer
|
|
2, // iProduct
|
|
3, // iSerialNumber
|
|
1 // bNumConfigurations
|
|
};
|
|
|
|
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
|
|
static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
|
|
// Keyboard Collection
|
|
0x05, 0x01, // Usage Page (Generic Desktop),
|
|
0x09, 0x06, // Usage (Keyboard),
|
|
0xA1, 0x01, // Collection (Application) - Keyboard,
|
|
|
|
// Modifier Byte
|
|
0x75, 0x01, // Report Size (1),
|
|
0x95, 0x08, // Report Count (8),
|
|
0x05, 0x07, // Usage Page (Key Codes),
|
|
0x19, 0xE0, // Usage Minimum (224),
|
|
0x29, 0xE7, // Usage Maximum (231),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x01, // Logical Maximum (1),
|
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
|
|
|
// LED Report
|
|
0x95, 0x05, // Report Count (5),
|
|
0x75, 0x01, // Report Size (1),
|
|
0x05, 0x08, // Usage Page (LEDs),
|
|
0x19, 0x01, // Usage Minimum (1),
|
|
0x29, 0x05, // Usage Maximum (5),
|
|
0x91, 0x02, // Output (Data, Variable, Absolute),
|
|
|
|
// LED Report Padding
|
|
0x95, 0x01, // Report Count (1),
|
|
0x75, 0x03, // Report Size (3),
|
|
0x91, 0x03, // Output (Constant),
|
|
|
|
// Normal Keys
|
|
0x95, 0x06, // Report Count (6),
|
|
0x75, 0x08, // Report Size (8),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x7F, // Logical Maximum(104),
|
|
0x05, 0x07, // Usage Page (Key Codes),
|
|
0x19, 0x00, // Usage Minimum (0),
|
|
0x29, 0x7F, // Usage Maximum (104),
|
|
0x81, 0x00, // Input (Data, Array),
|
|
0xc0, // End Collection - Keyboard
|
|
};
|
|
|
|
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
|
|
static const uint8_t PROGMEM keyboard_nkro_hid_report_desc[] = {
|
|
/*
|
|
// System Control Collection
|
|
0x05, 0x01, // Usage Page (Generic Desktop),
|
|
0x09, 0x80, // Usage (System Control),
|
|
0xA1, 0x01, // Collection (Application),
|
|
0x85, 0x01, // Report ID (1),
|
|
0x95, 0x06, // Report Count (6),
|
|
0x75, 0x08, // Report Size (8),
|
|
0x19, 0x81, // Usage Minimum (129),
|
|
0x29, 0x83, // Usage Maximum (131),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x01, // Logical Maximum (1),
|
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
|
0x95, 0x05, // Report Count (5),
|
|
0x75, 0x01, // Report Size (1),
|
|
0x81, 0x03, // Input (Constant, Data, Variable, Absolute),
|
|
0xc0, 0x00, // End Collection - System Control
|
|
*/
|
|
|
|
// Keyboard Collection
|
|
0x05, 0x01, // Usage Page (Generic Desktop),
|
|
0x09, 0x06, // Usage (Keyboard),
|
|
0xA1, 0x01, // Collection (Application) - Keyboard,
|
|
|
|
// Modifier Byte
|
|
0x75, 0x01, // Report Size (1),
|
|
0x85, 0x02, // Report ID (2),
|
|
0x95, 0x08, // Report Count (8),
|
|
0x05, 0x07, // Usage Page (Key Codes),
|
|
0x19, 0xE0, // Usage Minimum (224),
|
|
0x29, 0xE7, // Usage Maximum (231),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x01, // Logical Maximum (1),
|
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
|
|
|
// Media Keys
|
|
0x95, 0x08, // Report Count (8),
|
|
0x85, 0x03, // Report ID (3),
|
|
0x75, 0x01, // Report Size (1),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x01, // Logical Maximum (1),
|
|
0x05, 0x0C, // Usage Page (Consumer),
|
|
0x09, 0xE9, // Usage (Volume Increment),
|
|
0x09, 0xEA, // Usage (Volume Decrement),
|
|
0x09, 0xE2, // Usage (Mute),
|
|
0x09, 0xCD, // Usage (Play/Pause),
|
|
0x09, 0xB5, // Usage (Scan Next Track),
|
|
0x09, 0xB6, // Usage (Scan Previous Track),
|
|
0x09, 0xB7, // Usage (Stop),
|
|
0x09, 0xB8, // Usage (Eject),
|
|
0x81, 0x02, // Input (Data, Variable, Absolute),
|
|
|
|
// LED Report
|
|
0x95, 0x05, // Report Count (5),
|
|
0x85, 0x01, // Report ID (1),
|
|
0x75, 0x01, // Report Size (1),
|
|
0x05, 0x08, // Usage Page (LEDs),
|
|
0x19, 0x01, // Usage Minimum (1),
|
|
0x29, 0x05, // Usage Maximum (5),
|
|
0x91, 0x02, // Output (Data, Variable, Absolute),
|
|
|
|
// LED Report Padding
|
|
0x95, 0x01, // Report Count (1),
|
|
0x75, 0x03, // Report Size (3),
|
|
0x91, 0x03, // Output (Constant),
|
|
|
|
/*
|
|
// Misc Keys
|
|
0x95, 0x06, // Report Count (6),
|
|
0x75, 0x01, // Report Size (1),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x7F, // Logical Maximum(104),
|
|
0x05, 0x07, // Usage Page (Key Codes),
|
|
0x19, 0x00, // Usage Minimum (0),
|
|
0x29, 0x7F, // Usage Maximum (104),
|
|
0x81, 0x00, // Input (Data, Array),
|
|
*/
|
|
|
|
// Normal Keys
|
|
0x95, 0x06, // Report Count (6),
|
|
0x85, 0x04, // Report ID (4),
|
|
0x75, 0x08, // Report Size (8),
|
|
0x15, 0x00, // Logical Minimum (0),
|
|
0x25, 0x7F, // Logical Maximum(104),
|
|
0x05, 0x07, // Usage Page (Key Codes),
|
|
0x19, 0x00, // Usage Minimum (0),
|
|
0x29, 0x7F, // Usage Maximum (104),
|
|
0x81, 0x00, // Input (Data, Array),
|
|
0xc0, // End Collection - Keyboard
|
|
};
|
|
|
|
// <Configuration> + <Keyboard HID> + <NKRO Keyboard HID> + <Serial CDC>
|
|
#define CONFIG1_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 8+9+5+5+4+5+7+9+7+7)
|
|
#define KEYBOARD_HID_DESC_OFFSET (9 + 9)
|
|
#define KEYBOARD_NKRO_HID_DESC_OFFSET (9 + 9+9+7 + 9)
|
|
#define SERIAL_CDC_DESC_OFFSET (9 + 9+9+7 + 9+9+7)
|
|
static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
|
|
// --- Configuration ---
|
|
// - 9 bytes -
|
|
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
|
|
9, // bLength;
|
|
2, // bDescriptorType;
|
|
LSB(CONFIG1_DESC_SIZE), // wTotalLength
|
|
MSB(CONFIG1_DESC_SIZE),
|
|
4, // bNumInterfaces
|
|
1, // bConfigurationValue
|
|
0, // iConfiguration
|
|
0x80, // bmAttributes
|
|
250, // bMaxPower
|
|
|
|
// --- Keyboard HID ---
|
|
// - 9 bytes -
|
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
9, // bLength
|
|
4, // bDescriptorType
|
|
KEYBOARD_INTERFACE, // bInterfaceNumber
|
|
0, // bAlternateSetting
|
|
1, // bNumEndpoints
|
|
0x03, // bInterfaceClass (0x03 = HID)
|
|
0x01, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
|
|
0x01, // bInterfaceProtocol (0x01 = Keyboard)
|
|
0, // iInterface
|
|
// - 9 bytes -
|
|
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
|
9, // bLength
|
|
0x21, // bDescriptorType
|
|
0x11, 0x01, // bcdHID
|
|
33, // bCountryCode - Defaulting to US for now. TODO
|
|
1, // bNumDescriptors
|
|
0x22, // bDescriptorType
|
|
LSB(sizeof(keyboard_hid_report_desc)), // wDescriptorLength
|
|
MSB(sizeof(keyboard_hid_report_desc)),
|
|
// - 7 bytes -
|
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
7, // bLength
|
|
5, // bDescriptorType
|
|
KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
|
|
0x03, // bmAttributes (0x03=intr)
|
|
KEYBOARD_SIZE, 0, // wMaxPacketSize
|
|
1, // bInterval
|
|
|
|
// --- NKRO Keyboard HID ---
|
|
// - 9 bytes -
|
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
9, // bLength
|
|
4, // bDescriptorType
|
|
KEYBOARD_NKRO_INTERFACE, // bInterfaceNumber
|
|
0, // bAlternateSetting
|
|
1, // bNumEndpoints
|
|
0x03, // bInterfaceClass (0x03 = HID)
|
|
0x00, // bInterfaceSubClass (0x00 = Non-Boot, 0x01 = Boot)
|
|
0x01, // bInterfaceProtocol (0x01 = Keyboard)
|
|
0, // iInterface
|
|
// - 9 bytes -
|
|
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
|
9, // bLength
|
|
0x21, // bDescriptorType
|
|
0x11, 0x01, // bcdHID
|
|
33, // bCountryCode - Defaulting to US for now. TODO
|
|
1, // bNumDescriptors
|
|
0x22, // bDescriptorType
|
|
// wDescriptorLength
|
|
LSB(sizeof(keyboard_nkro_hid_report_desc)),
|
|
MSB(sizeof(keyboard_nkro_hid_report_desc)),
|
|
// - 7 bytes -
|
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
7, // bLength
|
|
5, // bDescriptorType
|
|
KEYBOARD_NKRO_ENDPOINT | 0x80, // bEndpointAddress
|
|
0x03, // bmAttributes (0x03=intr)
|
|
KEYBOARD_NKRO_SIZE, 0, // wMaxPacketSize
|
|
1, // bInterval
|
|
|
|
// --- Serial CDC ---
|
|
// - 8 bytes -
|
|
// interface association descriptor, USB ECN, Table 9-Z
|
|
8, // bLength
|
|
11, // bDescriptorType
|
|
CDC_STATUS_INTERFACE, // bFirstInterface
|
|
2, // bInterfaceCount
|
|
0x02, // bFunctionClass
|
|
0x02, // bFunctionSubClass
|
|
0x01, // bFunctionProtocol
|
|
4, // iFunction
|
|
// - 9 bytes -
|
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
9, // bLength
|
|
4, // bDescriptorType
|
|
CDC_STATUS_INTERFACE, // bInterfaceNumber
|
|
0, // bAlternateSetting
|
|
1, // bNumEndpoints
|
|
0x02, // bInterfaceClass
|
|
0x02, // bInterfaceSubClass
|
|
0x01, // bInterfaceProtocol
|
|
0, // iInterface
|
|
// - 5 bytes -
|
|
// CDC Header Functional Descriptor, CDC Spec 5.2.3.1, Table 26
|
|
5, // bFunctionLength
|
|
0x24, // bDescriptorType
|
|
0x00, // bDescriptorSubtype
|
|
0x10, 0x01, // bcdCDC
|
|
// - 5 bytes -
|
|
// Call Management Functional Descriptor, CDC Spec 5.2.3.2, Table 27
|
|
5, // bFunctionLength
|
|
0x24, // bDescriptorType
|
|
0x01, // bDescriptorSubtype
|
|
0x01, // bmCapabilities
|
|
1, // bDataInterface
|
|
// - 4 bytes -
|
|
// Abstract Control Management Functional Descriptor, CDC Spec 5.2.3.3, Table 28
|
|
4, // bFunctionLength
|
|
0x24, // bDescriptorType
|
|
0x02, // bDescriptorSubtype
|
|
0x06, // bmCapabilities
|
|
// - 5 bytes -
|
|
// Union Functional Descriptor, CDC Spec 5.2.3.8, Table 33
|
|
5, // bFunctionLength
|
|
0x24, // bDescriptorType
|
|
0x06, // bDescriptorSubtype
|
|
CDC_STATUS_INTERFACE, // bMasterInterface
|
|
CDC_DATA_INTERFACE, // bSlaveInterface0
|
|
// - 7 bytes -
|
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
7, // bLength
|
|
5, // bDescriptorType
|
|
CDC_ACM_ENDPOINT | 0x80, // bEndpointAddress
|
|
0x03, // bmAttributes (0x03=intr)
|
|
CDC_ACM_SIZE, 0, // wMaxPacketSize
|
|
64, // bInterval
|
|
// - 9 bytes -
|
|
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
|
9, // bLength
|
|
4, // bDescriptorType
|
|
CDC_DATA_INTERFACE, // bInterfaceNumber
|
|
0, // bAlternateSetting
|
|
2, // bNumEndpoints
|
|
0x0A, // bInterfaceClass
|
|
0x00, // bInterfaceSubClass
|
|
0x00, // bInterfaceProtocol
|
|
0, // iInterface
|
|
// - 7 bytes -
|
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
7, // bLength
|
|
5, // bDescriptorType
|
|
CDC_RX_ENDPOINT, // bEndpointAddress
|
|
0x02, // bmAttributes (0x02=bulk)
|
|
CDC_RX_SIZE, 0, // wMaxPacketSize
|
|
0, // bInterval
|
|
// - 7 bytes -
|
|
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
|
7, // bLength
|
|
5, // bDescriptorType
|
|
CDC_TX_ENDPOINT | 0x80, // bEndpointAddress
|
|
0x02, // bmAttributes (0x02=bulk)
|
|
CDC_TX_SIZE, 0, // wMaxPacketSize
|
|
0, // bInterval
|
|
};
|
|
|
|
|
|
// Configuration Endpoint (0) Descriptor
|
|
struct usb_string_descriptor_struct {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
int16_t wString[];
|
|
};
|
|
static const struct usb_string_descriptor_struct PROGMEM string0 = {
|
|
4,
|
|
3,
|
|
{0x0409}
|
|
};
|
|
static const struct usb_string_descriptor_struct PROGMEM string1 = {
|
|
sizeof(STR_MANUFACTURER),
|
|
3,
|
|
STR_MANUFACTURER
|
|
};
|
|
static const struct usb_string_descriptor_struct PROGMEM string2 = {
|
|
sizeof(STR_PRODUCT),
|
|
3,
|
|
STR_PRODUCT
|
|
};
|
|
static const struct usb_string_descriptor_struct PROGMEM string3 = {
|
|
sizeof(STR_SERIAL),
|
|
3,
|
|
STR_SERIAL
|
|
};
|
|
|
|
// This table defines which descriptor data is sent for each specific
|
|
// request from the host (in wValue and wIndex).
|
|
static const struct descriptor_list_struct {
|
|
uint16_t wValue;
|
|
uint16_t wIndex;
|
|
const uint8_t *addr;
|
|
uint8_t length;
|
|
} PROGMEM descriptor_list[] = {
|
|
{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
|
|
{0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
|
|
{0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
|
|
{0x2100, KEYBOARD_INTERFACE, config1_descriptor + KEYBOARD_HID_DESC_OFFSET, 9},
|
|
{0x2200, KEYBOARD_NKRO_INTERFACE, keyboard_nkro_hid_report_desc, sizeof(keyboard_nkro_hid_report_desc)},
|
|
{0x2100, KEYBOARD_NKRO_INTERFACE, config1_descriptor + KEYBOARD_NKRO_HID_DESC_OFFSET, 9},
|
|
{0x0300, 0x0000, (const uint8_t *)&string0, 4},
|
|
{0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
|
|
{0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)},
|
|
{0x0303, 0x0409, (const uint8_t *)&string3, sizeof(STR_SERIAL)}
|
|
};
|
|
#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
|
|
|
|
|
|
#endif // usb_keyboard_serial_h__
|
|
|