Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Scan/STLcd/exampleAPI.bash

51 lines
1.7 KiB
Bash
Executable File

#!/usr/bin/env bash
# STLcd
# Virtual Serial Port API Example
# Jacob Alexander 2015
if [ $# -eq 0 ]; then
echo "You must specify your virtual serialport. (/dev/ttyACM0 on linux, /dev/cu.usbmodemXXXX on OSX)"
echo " ex: $0 /dev/ttyACM0"
exit 1
fi
# XXX Set this to match your virtual serialport
# TODO Show example for Cygwin/Windows
# For Mac OSX it will be something like /dev/cu.usbmodem1413 (number may differ)
SERIALPORT=$1
# NOTE: Make sure you don't write too quickly to the serial port, it can get overwhelmed by a modern computer
# Generally this just means commands will get ignored
# I'm using 100 ms sleeps here, but much smaller are probably sufficient
# Clear out cli buffer
printf "\r" > $SERIALPORT
# Change backlight color
# 3 16-bit numbers (hex or decimal) Red, Green and Blue
sleep 0.1
printf "lcdColor 0x100 0x2000 0x4000\r" > $SERIALPORT # Light blue
# Change the lcd image
# Arguments:
# - page
# - starting address
# - pixels (1 bit per pixel)
#
# There are 9 total pages of display memory, but only 4 are visable at time (it is possible to scroll though)
# Each page is 128 bits wide (16 bytes)
# See the datasheet for full details http://www.newhavendisplay.com/specs/NHD-C12832A1Z-FSRGB-FBW-3V.pdf
sleep 0.1
printf "lcdDisp 0x0 0x0 0xFF 0x13 0xFF 0x11 0xFF\r" > $SERIALPORT
sleep 0.1
printf "lcdDisp 0x1 0x10 0xFF 0x13 0xFF 0x11 0xFF 0x44\r" > $SERIALPORT
sleep 0.1
printf "lcdDisp 0x2 0x20 0xFF 0x13 0xFF 0x11 0xFF\r" > $SERIALPORT
sleep 0.1
printf "lcdDisp 0x3 0x30 0xFF 0x13 0xFF 0x11 0xFF\r" > $SERIALPORT
# Send command directly to the lcd
# See the datasheet for full details http://www.newhavendisplay.com/specs/NHD-C12832A1Z-FSRGB-FBW-3V.pdf
sleep 0.1
printf "lcdCmd 0xA7\r" > $SERIALPORT # Reverse display (0xA6 is Normal)