6d2a4e0f23
- Almost never needed - However, some keyboards exhibit odd strobing behaviours (pressing two keys at once with a single key) - Setting to around 10 us tends to fix the issue
49 lines
2.1 KiB
Plaintext
49 lines
2.1 KiB
Plaintext
Name = MatrixArmCapabilities;
|
|
Version = 0.1;
|
|
Author = "HaaTa (Jacob Alexander) 2015";
|
|
KLL = 0.3a;
|
|
|
|
# Modified Date
|
|
Date = 2015-02-28;
|
|
|
|
# Defines available to the MatrixArm sub-module
|
|
# This debounce scheme uses a rolling counter for press/unpress on each key
|
|
# Each counter is incremented if pressed/unpressed and the opposite counter is divided by 2
|
|
# Using the default division threshold (0xFFFF), there are approximately 13 cycles in a perfect cycle
|
|
# If debounce is actually necessary, this will increase (better switches will debounce faster)
|
|
#
|
|
# The maximum threshold is 0xFFFFFFFF, which will give around ~32 -> 36 cycles per perfect cycle
|
|
# Using a threshold higher than 0xFFFF will require 32 bit variables, and double the ram usage.
|
|
DebounceDivThreshold => DebounceDivThreshold_define;
|
|
DebounceDivThreshold = 0xFFFF; # Default debounce
|
|
#DebounceDivThreshold = 0xFFFFFFFF; # Max debounce
|
|
|
|
# This defines how often the matrix is scanned
|
|
# By, default the key matrix is scanned once per macro processing loop
|
|
# For fast uCs and bouncy switches, this can be non-ideal
|
|
# 0 - Bit-shift of 0
|
|
# 1 - Bit-shift of 1 (i.e. divide by 2)
|
|
# 2 - Bit-shift of 2 (i.e. divide by 4)
|
|
# 3 - Bit-shift of 3 (i.e. divide by 8)
|
|
# etc.
|
|
# Depending on the architecture, this is either a maximum of 16 or 32
|
|
# Increasing this value will increase switch latency
|
|
DebounceThrottleDiv => DebounceThrottleDiv_define;
|
|
DebounceThrottleDiv = 0; # Default
|
|
#DebounceThrottleDiv = 2; # /4 divider
|
|
|
|
# This defines the minimum amount of time after a transition until allowing another transition
|
|
# Generally switches require a minimum 5 ms debounce period
|
|
# Since a decision can usually be made quite quickly, there is little latency on each press
|
|
# However, this defines the latency at which the switch state can change
|
|
MinDebounceTime => MinDebounceTime_define;
|
|
MinDebounceTime = 5; # 5 ms
|
|
|
|
# This option delays each strobe by the given number of microseconds
|
|
# By default this should *NOT* be set unless your keyboard is having issues
|
|
# Delaying more than 10 usecs may cause significant slow-downs with other keyboard functions
|
|
StrobeDelay => StrobeDelay_define;
|
|
StrobeDelay = 0; # Disabled
|
|
#StrobeDelay = 10; # 10 us
|
|
|