Kiibohd Controller
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

capabilities.kll 5.1KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677
  1. Name = STLcdCapabilities;
  2. Version = 0.1;
  3. Author = "HaaTa (Jacob Alexander) 2015";
  4. KLL = 0.3c;
  5. # Modified Date
  6. Date = 2015-08-01;
  7. # Defines available to the STLcd sub-module
  8. # PWM Prescalar
  9. # In general this can be left alone
  10. # A higher prescalar should be lower power usage (less switching)
  11. # However, flickering may be noticeable.
  12. #
  13. # Here's a calculation table valid at a 72 MHz system clock
  14. # Prescalars range from 0 to 7 (1 to 128)
  15. # Base FTM clock selection (72 MHz system clock)
  16. # @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period
  17. # Higher pre-scalar will use the most power (also look the best)
  18. # Pre-scalar calculations
  19. # 0 - 72 MHz -> 549 Hz
  20. # 1 - 36 MHz -> 275 Hz
  21. # 2 - 18 MHz -> 137 Hz
  22. # 3 - 9 MHz -> 69 Hz (Slightly visible flicker)
  23. # 4 - 4 500 kHz -> 34 Hz (Visible flickering)
  24. # 5 - 2 250 kHz -> 17 Hz
  25. # 6 - 1 125 kHz -> 9 Hz
  26. # 7 - 562 500 Hz -> 4 Hz
  27. STLcdBacklightPrescalar => STLcdBacklightPrescalar_define;
  28. STLcdBacklightPrescalar = 0;
  29. # Default Backlight Channel Brightness
  30. # There are 3 channels, RGB
  31. # In order to get other colors you must mix the 3 colors
  32. # Each channel is a 16-bit register (65536 levels)
  33. # Technically, this means, the backlight is a 48-bit RGB pixel
  34. # In practice, it may be difficult to get color consistency at times if too bright or too dim
  35. STLcdBacklightRed => STLcdBacklightRed_define;
  36. STLcdBacklightGreen => STLcdBacklightGreen_define;
  37. STLcdBacklightBlue => STLcdBacklightBlue_define;
  38. # Defaults to 6% brightness, white
  39. STLcdBacklightRed = 0x0FFF;
  40. STLcdBacklightGreen = 0x0FFF;
  41. STLcdBacklightBlue = 0x0FFF;
  42. # Default LCD Image
  43. #
  44. # The easiest way to generate this data is using the bitmap2Struct.py script in this folder
  45. # It will output the necessary uint8_t array to set here
  46. #
  47. STLcdDefaultImage => STLcdDefaultImage_define;
  48. # Only the data portion is required
  49. # Must be on a single line
  50. STLcdDefaultImage = "
  51. 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  52. 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  53. 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  54. 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  55. ";
  56. # Layer Status Display
  57. LCDLayerDisplay => LCD_layerStack_capability();
  58. LCDLayerDisplayExact => LCD_layerStackExact_capability( display : 1, stack1 : 2, stack2 : 2, stack3 : 2, stack4 : 2 );
  59. # LCD Module Enabled
  60. LCDEnabled => LCDEnabled_define;
  61. LCDEnabled = 1;