Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Scan/MD1
Jacob Alexander 46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
..
defaultMap.kll Adding examples of custom action/capabilties 2015-08-16 14:46:26 -07:00
matrix.h Code cleanup 2015-06-14 14:33:40 -07:00
pinout Fixing none parameter. 2015-05-13 21:58:43 -07:00
prototype.kll Re-Adding previous defaultMap.kll used for early Infinity PCBs 2014-12-28 20:08:33 -08:00
scan_loop.c Adding dynamic USB power support 2016-02-21 19:56:52 -08:00
scan_loop.h Adding dynamic USB power support 2016-02-21 19:56:52 -08:00
setup.cmake Updating setup.cmake files to use Module hierarchy implicitly 2015-01-25 17:55:28 -08:00