Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Scan/UARTConnect
Jacob Alexander 46765e85c5 Adding dynamic USB power support
- Each scan module now has a current change callback which passes the available current as a parameter
- No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration
- If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases)
- Now working with the Apple Ipad (no over-power messages)
- Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices)
- More effecient set_feature/clear_feature handling (device handler)
- Initial power handling via Interconnect (still needs work to get it more dynamic)
2016-02-21 19:56:52 -08:00
..
capabilities.kll Adding basic remote capabilities + UART Rx DMA buffers 2015-10-15 00:21:54 -07:00
connect_scan.c Adding dynamic USB power support 2016-02-21 19:56:52 -08:00
connect_scan.h Adding dynamic USB power support 2016-02-21 19:56:52 -08:00
setup.cmake Initial commit for UARTConnect module 2015-03-15 16:58:01 -07:00