aaae9bc0f2
- Each scan module now has a current change callback which passes the available current as a parameter - No longer attempts to use the max 500 mA immediately, starts with 100 mA then goes to 500 mA after enumeration - If enumeration fails due to bMaxPower of 500 mA, then attempt again at 100 mA (might also be possible to go even lower to 20 mA in certain cases) - Now working with the Apple Ipad (no over-power messages) - Fixed Wake-up behaviour on Apple Ipad (and likely other iOS devices) - More effecient set_feature/clear_feature handling (device handler) - Initial power handling via Interconnect (still needs work to get it more dynamic)
780 satır
20 KiB
C
780 satır
20 KiB
C
/* Copyright (C) 2011-2016 by Jacob Alexander
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
// ----- Includes -----
|
|
|
|
// Compiler Includes
|
|
#include <Lib/OutputLib.h>
|
|
|
|
// Project Includes
|
|
#include <cli.h>
|
|
#include <led.h>
|
|
#include <print.h>
|
|
#include <scan_loop.h>
|
|
|
|
// USB Includes
|
|
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
|
|
#include "avr/usb_keyboard_serial.h"
|
|
#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_)
|
|
#include "arm/usb_dev.h"
|
|
#include "arm/usb_keyboard.h"
|
|
#include "arm/usb_serial.h"
|
|
#endif
|
|
|
|
// Local Includes
|
|
#include "output_com.h"
|
|
|
|
|
|
|
|
// ----- Macros -----
|
|
|
|
// Used to build a bitmap lookup table from a byte addressable array
|
|
#define byteLookup( byte ) case (( byte ) * ( 8 )): bytePosition = byte; byteShift = 0; break; \
|
|
case (( byte ) * ( 8 ) + ( 1 )): bytePosition = byte; byteShift = 1; break; \
|
|
case (( byte ) * ( 8 ) + ( 2 )): bytePosition = byte; byteShift = 2; break; \
|
|
case (( byte ) * ( 8 ) + ( 3 )): bytePosition = byte; byteShift = 3; break; \
|
|
case (( byte ) * ( 8 ) + ( 4 )): bytePosition = byte; byteShift = 4; break; \
|
|
case (( byte ) * ( 8 ) + ( 5 )): bytePosition = byte; byteShift = 5; break; \
|
|
case (( byte ) * ( 8 ) + ( 6 )): bytePosition = byte; byteShift = 6; break; \
|
|
case (( byte ) * ( 8 ) + ( 7 )): bytePosition = byte; byteShift = 7; break
|
|
|
|
|
|
|
|
// ----- Function Declarations -----
|
|
|
|
void cliFunc_kbdProtocol( char* args );
|
|
void cliFunc_outputDebug( char* args );
|
|
void cliFunc_readLEDs ( char* args );
|
|
void cliFunc_sendKeys ( char* args );
|
|
void cliFunc_setKeys ( char* args );
|
|
void cliFunc_setMod ( char* args );
|
|
|
|
|
|
|
|
// ----- Variables -----
|
|
|
|
// Output Module command dictionary
|
|
CLIDict_Entry( kbdProtocol, "Keyboard Protocol Mode: 0 - Boot, 1 - OS/NKRO Mode" );
|
|
CLIDict_Entry( outputDebug, "Toggle Output Debug mode." );
|
|
CLIDict_Entry( readLEDs, "Read LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 ScrlLck, 16 Kana, etc." );
|
|
CLIDict_Entry( sendKeys, "Send the prepared list of USB codes and modifier byte." );
|
|
CLIDict_Entry( setKeys, "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m." );
|
|
CLIDict_Entry( setMod, "Set the modfier byte:" NL "\t\t1 LCtrl, 2 LShft, 4 LAlt, 8 LGUI, 16 RCtrl, 32 RShft, 64 RAlt, 128 RGUI" );
|
|
|
|
CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
|
|
CLIDict_Item( kbdProtocol ),
|
|
CLIDict_Item( outputDebug ),
|
|
CLIDict_Item( readLEDs ),
|
|
CLIDict_Item( sendKeys ),
|
|
CLIDict_Item( setKeys ),
|
|
CLIDict_Item( setMod ),
|
|
{ 0, 0, 0 } // Null entry for dictionary end
|
|
};
|
|
|
|
|
|
// Which modifier keys are currently pressed
|
|
// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui
|
|
// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
|
|
uint8_t USBKeys_Modifiers = 0;
|
|
uint8_t USBKeys_ModifiersCLI = 0; // Separate CLI send buffer
|
|
|
|
// Currently pressed keys, max is defined by USB_MAX_KEY_SEND
|
|
uint8_t USBKeys_Keys [USB_NKRO_BITFIELD_SIZE_KEYS];
|
|
uint8_t USBKeys_KeysCLI[USB_NKRO_BITFIELD_SIZE_KEYS]; // Separate CLI send buffer
|
|
|
|
// System Control and Consumer Control 1KRO containers
|
|
uint8_t USBKeys_SysCtrl;
|
|
uint16_t USBKeys_ConsCtrl;
|
|
|
|
// The number of keys sent to the usb in the array
|
|
uint8_t USBKeys_Sent = 0;
|
|
uint8_t USBKeys_SentCLI = 0;
|
|
|
|
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
|
|
volatile uint8_t USBKeys_LEDs = 0;
|
|
|
|
// Protocol setting from the host.
|
|
// 0 - Boot Mode
|
|
// 1 - NKRO Mode (Default, unless set by a BIOS or boot interface)
|
|
volatile uint8_t USBKeys_Protocol = 1;
|
|
|
|
// Indicate if USB should send update
|
|
// OS only needs update if there has been a change in state
|
|
USBKeyChangeState USBKeys_Changed = USBKeyChangeState_None;
|
|
|
|
// the idle configuration, how often we send the report to the
|
|
// host (ms * 4) even when it hasn't changed
|
|
uint8_t USBKeys_Idle_Config = 125;
|
|
|
|
// count until idle timeout
|
|
uint8_t USBKeys_Idle_Count = 0;
|
|
|
|
// Indicates whether the Output module is fully functional
|
|
// 0 - Not fully functional, 1 - Fully functional
|
|
// 0 is often used to show that a USB cable is not plugged in (but has power)
|
|
volatile uint8_t Output_Available = 0;
|
|
|
|
// Debug control variable for Output modules
|
|
// 0 - Debug disabled (default)
|
|
// 1 - Debug enabled
|
|
uint8_t Output_DebugMode = 0;
|
|
|
|
// mA - Set by outside module if not using USB (i.e. Interconnect)
|
|
// Generally set to 100 mA (low power) or 500 mA (high power)
|
|
uint16_t Output_ExtCurrent_Available = 0;
|
|
|
|
// mA - Set by USB module (if exists)
|
|
// Initially 100 mA, but may be negotiated higher (e.g. 500 mA)
|
|
uint16_t Output_USBCurrent_Available = 0;
|
|
|
|
|
|
|
|
// ----- Capabilities -----
|
|
|
|
// Set Boot Keyboard Protocol
|
|
void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_kbdProtocolBoot()");
|
|
return;
|
|
}
|
|
|
|
// Only set if necessary
|
|
if ( USBKeys_Protocol == 0 )
|
|
return;
|
|
|
|
// TODO Analog inputs
|
|
// Only set on key press
|
|
if ( stateType != 0x01 )
|
|
return;
|
|
|
|
// Flush the key buffers
|
|
Output_flushBuffers();
|
|
|
|
// Set the keyboard protocol to Boot Mode
|
|
USBKeys_Protocol = 0;
|
|
}
|
|
|
|
|
|
// Set NKRO Keyboard Protocol
|
|
void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_kbdProtocolNKRO()");
|
|
return;
|
|
}
|
|
|
|
// Only set if necessary
|
|
if ( USBKeys_Protocol == 1 )
|
|
return;
|
|
|
|
// TODO Analog inputs
|
|
// Only set on key press
|
|
if ( stateType != 0x01 )
|
|
return;
|
|
|
|
// Flush the key buffers
|
|
Output_flushBuffers();
|
|
|
|
// Set the keyboard protocol to NKRO Mode
|
|
USBKeys_Protocol = 1;
|
|
}
|
|
|
|
|
|
// Sends a Consumer Control code to the USB Output buffer
|
|
void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_consCtrlSend(consCode)");
|
|
return;
|
|
}
|
|
|
|
// Not implemented in Boot Mode
|
|
if ( USBKeys_Protocol == 0 )
|
|
{
|
|
warn_print("Consumer Control is not implemented for Boot Mode");
|
|
return;
|
|
}
|
|
|
|
// TODO Analog inputs
|
|
// Only indicate USB has changed if either a press or release has occured
|
|
if ( state == 0x01 || state == 0x03 )
|
|
USBKeys_Changed |= USBKeyChangeState_Consumer;
|
|
|
|
// Only send keypresses if press or hold state
|
|
if ( stateType == 0x00 && state == 0x03 ) // Release state
|
|
{
|
|
USBKeys_ConsCtrl = 0;
|
|
return;
|
|
}
|
|
|
|
// Set consumer control code
|
|
USBKeys_ConsCtrl = *(uint16_t*)(&args[0]);
|
|
}
|
|
|
|
|
|
// Ignores the given key status update
|
|
// Used to prevent fall-through, this is the None keyword in KLL
|
|
void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_noneSend()");
|
|
return;
|
|
}
|
|
|
|
// Nothing to do, because that's the point :P
|
|
}
|
|
|
|
|
|
// Sends a System Control code to the USB Output buffer
|
|
void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_sysCtrlSend(sysCode)");
|
|
return;
|
|
}
|
|
|
|
// Not implemented in Boot Mode
|
|
if ( USBKeys_Protocol == 0 )
|
|
{
|
|
warn_print("System Control is not implemented for Boot Mode");
|
|
return;
|
|
}
|
|
|
|
// TODO Analog inputs
|
|
// Only indicate USB has changed if either a press or release has occured
|
|
if ( state == 0x01 || state == 0x03 )
|
|
USBKeys_Changed |= USBKeyChangeState_System;
|
|
|
|
// Only send keypresses if press or hold state
|
|
if ( stateType == 0x00 && state == 0x03 ) // Release state
|
|
{
|
|
USBKeys_SysCtrl = 0;
|
|
return;
|
|
}
|
|
|
|
// Set system control code
|
|
USBKeys_SysCtrl = args[0];
|
|
}
|
|
|
|
|
|
// Adds a single USB Code to the USB Output buffer
|
|
// Argument #1: USB Code
|
|
void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_usbCodeSend(usbCode)");
|
|
return;
|
|
}
|
|
|
|
// Depending on which mode the keyboard is in the USB needs Press/Hold/Release events
|
|
uint8_t keyPress = 0; // Default to key release, only used for NKRO
|
|
switch ( USBKeys_Protocol )
|
|
{
|
|
case 0: // Boot Mode
|
|
// TODO Analog inputs
|
|
// Only indicate USB has changed if either a press or release has occured
|
|
if ( state == 0x01 || state == 0x03 )
|
|
USBKeys_Changed = USBKeyChangeState_MainKeys;
|
|
|
|
// Only send keypresses if press or hold state
|
|
if ( stateType == 0x00 && state == 0x03 ) // Release state
|
|
return;
|
|
break;
|
|
case 1: // NKRO Mode
|
|
// Only send press and release events
|
|
if ( stateType == 0x00 && state == 0x02 ) // Hold state
|
|
return;
|
|
|
|
// Determine if setting or unsetting the bitfield (press == set)
|
|
if ( stateType == 0x00 && state == 0x01 ) // Press state
|
|
keyPress = 1;
|
|
break;
|
|
}
|
|
|
|
// Get the keycode from arguments
|
|
uint8_t key = args[0];
|
|
|
|
// Depending on which mode the keyboard is in, USBKeys_Keys array is used differently
|
|
// Boot mode - Maximum of 6 byte codes
|
|
// NKRO mode - Each bit of the 26 byte corresponds to a key
|
|
// Bits 0 - 45 (bytes 0 - 5) correspond to USB Codes 4 - 49 (Main)
|
|
// Bits 48 - 161 (bytes 6 - 20) correspond to USB Codes 51 - 164 (Secondary)
|
|
// Bits 168 - 213 (bytes 21 - 26) correspond to USB Codes 176 - 221 (Tertiary)
|
|
// Bits 214 - 216 unused
|
|
uint8_t bytePosition = 0;
|
|
uint8_t byteShift = 0;
|
|
switch ( USBKeys_Protocol )
|
|
{
|
|
case 0: // Boot Mode
|
|
// Set the modifier bit if this key is a modifier
|
|
if ( (key & 0xE0) == 0xE0 ) // AND with 0xE0 (Left Ctrl, first modifier)
|
|
{
|
|
USBKeys_Modifiers |= 1 << (key ^ 0xE0); // Left shift 1 by key XOR 0xE0
|
|
}
|
|
// Normal USB Code
|
|
else
|
|
{
|
|
// USB Key limit reached
|
|
if ( USBKeys_Sent >= USB_BOOT_MAX_KEYS )
|
|
{
|
|
warn_print("USB Key limit reached");
|
|
return;
|
|
}
|
|
|
|
// Make sure key is within the USB HID range
|
|
if ( key <= 104 )
|
|
{
|
|
USBKeys_Keys[USBKeys_Sent++] = key;
|
|
}
|
|
// Invalid key
|
|
else
|
|
{
|
|
warn_msg("USB Code above 104/0x68 in Boot Mode: ");
|
|
printHex( key );
|
|
print( NL );
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 1: // NKRO Mode
|
|
// Set the modifier bit if this key is a modifier
|
|
if ( (key & 0xE0) == 0xE0 ) // AND with 0xE0 (Left Ctrl, first modifier)
|
|
{
|
|
if ( keyPress )
|
|
{
|
|
USBKeys_Modifiers |= 1 << (key ^ 0xE0); // Left shift 1 by key XOR 0xE0
|
|
}
|
|
else // Release
|
|
{
|
|
USBKeys_Modifiers &= ~(1 << (key ^ 0xE0)); // Left shift 1 by key XOR 0xE0
|
|
}
|
|
|
|
USBKeys_Changed |= USBKeyChangeState_Modifiers;
|
|
break;
|
|
}
|
|
// First 6 bytes
|
|
else if ( key >= 4 && key <= 49 )
|
|
{
|
|
// Lookup (otherwise division or multiple checks are needed to do alignment)
|
|
// Starting at 0th position, each byte has 8 bits, starting at 4th bit
|
|
uint8_t keyPos = key + (0 * 8 - 4); // Starting position in array, Ignoring 4 keys
|
|
switch ( keyPos )
|
|
{
|
|
byteLookup( 0 );
|
|
byteLookup( 1 );
|
|
byteLookup( 2 );
|
|
byteLookup( 3 );
|
|
byteLookup( 4 );
|
|
byteLookup( 5 );
|
|
}
|
|
|
|
USBKeys_Changed |= USBKeyChangeState_MainKeys;
|
|
}
|
|
// Next 14 bytes
|
|
else if ( key >= 51 && key <= 155 )
|
|
{
|
|
// Lookup (otherwise division or multiple checks are needed to do alignment)
|
|
// Starting at 6th byte position, each byte has 8 bits, starting at 51st bit
|
|
uint8_t keyPos = key + (6 * 8 - 51); // Starting position in array
|
|
switch ( keyPos )
|
|
{
|
|
byteLookup( 6 );
|
|
byteLookup( 7 );
|
|
byteLookup( 8 );
|
|
byteLookup( 9 );
|
|
byteLookup( 10 );
|
|
byteLookup( 11 );
|
|
byteLookup( 12 );
|
|
byteLookup( 13 );
|
|
byteLookup( 14 );
|
|
byteLookup( 15 );
|
|
byteLookup( 16 );
|
|
byteLookup( 17 );
|
|
byteLookup( 18 );
|
|
byteLookup( 19 );
|
|
}
|
|
|
|
USBKeys_Changed |= USBKeyChangeState_SecondaryKeys;
|
|
}
|
|
// Next byte
|
|
else if ( key >= 157 && key <= 164 )
|
|
{
|
|
// Lookup (otherwise division or multiple checks are needed to do alignment)
|
|
uint8_t keyPos = key + (20 * 8 - 157); // Starting position in array, Ignoring 6 keys
|
|
switch ( keyPos )
|
|
{
|
|
byteLookup( 20 );
|
|
}
|
|
|
|
USBKeys_Changed |= USBKeyChangeState_TertiaryKeys;
|
|
}
|
|
// Last 6 bytes
|
|
else if ( key >= 176 && key <= 221 )
|
|
{
|
|
// Lookup (otherwise division or multiple checks are needed to do alignment)
|
|
uint8_t keyPos = key + (21 * 8 - 176); // Starting position in array
|
|
switch ( keyPos )
|
|
{
|
|
byteLookup( 21 );
|
|
byteLookup( 22 );
|
|
byteLookup( 23 );
|
|
byteLookup( 24 );
|
|
byteLookup( 25 );
|
|
byteLookup( 26 );
|
|
}
|
|
|
|
USBKeys_Changed |= USBKeyChangeState_QuartiaryKeys;
|
|
}
|
|
// Received 0x00
|
|
// This is a special USB Code that internally indicates a "break"
|
|
// It is used to send "nothing" in order to break up sequences of USB Codes
|
|
else if ( key == 0x00 )
|
|
{
|
|
USBKeys_Changed |= USBKeyChangeState_MainKeys;
|
|
|
|
// Also flush out buffers just in case
|
|
Output_flushBuffers();
|
|
break;
|
|
}
|
|
// Invalid key
|
|
else
|
|
{
|
|
warn_msg("USB Code not within 4-49 (0x4-0x31), 51-155 (0x33-0x9B), 157-164 (0x9D-0xA4), 176-221 (0xB0-0xDD) or 224-231 (0xE0-0xE7) NKRO Mode: ");
|
|
printHex( key );
|
|
print( NL );
|
|
break;
|
|
}
|
|
|
|
// Set/Unset
|
|
if ( keyPress )
|
|
{
|
|
USBKeys_Keys[bytePosition] |= (1 << byteShift);
|
|
USBKeys_Sent++;
|
|
}
|
|
else // Release
|
|
{
|
|
USBKeys_Keys[bytePosition] &= ~(1 << byteShift);
|
|
USBKeys_Sent++;
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
|
|
{
|
|
// Display capability name
|
|
if ( stateType == 0xFF && state == 0xFF )
|
|
{
|
|
print("Output_flashMode()");
|
|
return;
|
|
}
|
|
|
|
// Start flash mode
|
|
Output_firmwareReload();
|
|
}
|
|
|
|
|
|
|
|
// ----- Functions -----
|
|
|
|
// Flush Key buffers
|
|
void Output_flushBuffers()
|
|
{
|
|
// Zero out USBKeys_Keys array
|
|
for ( uint8_t c = 0; c < USB_NKRO_BITFIELD_SIZE_KEYS; c++ )
|
|
USBKeys_Keys[ c ] = 0;
|
|
|
|
// Zero out other key buffers
|
|
USBKeys_ConsCtrl = 0;
|
|
USBKeys_Modifiers = 0;
|
|
USBKeys_SysCtrl = 0;
|
|
}
|
|
|
|
|
|
// USB Module Setup
|
|
inline void Output_setup()
|
|
{
|
|
// Initialize the USB
|
|
// If a USB connection does not exist, just ignore it
|
|
// All usb related functions will non-fatally fail if called
|
|
// If the USB initialization is delayed, then functionality will just be delayed
|
|
usb_init();
|
|
|
|
// Register USB Output CLI dictionary
|
|
CLI_registerDictionary( outputCLIDict, outputCLIDictName );
|
|
|
|
// Flush key buffers
|
|
Output_flushBuffers();
|
|
}
|
|
|
|
|
|
// USB Data Send
|
|
inline void Output_send()
|
|
{
|
|
// USB status checks
|
|
// Non-standard USB state manipulation, usually does nothing
|
|
usb_device_check();
|
|
|
|
// Boot Mode Only, unset stale keys
|
|
if ( USBKeys_Protocol == 0 )
|
|
for ( uint8_t c = USBKeys_Sent; c < USB_BOOT_MAX_KEYS; c++ )
|
|
USBKeys_Keys[c] = 0;
|
|
|
|
// Send keypresses while there are pending changes
|
|
while ( USBKeys_Changed )
|
|
usb_keyboard_send();
|
|
|
|
// Clear keys sent
|
|
USBKeys_Sent = 0;
|
|
|
|
// Signal Scan Module we are finished
|
|
switch ( USBKeys_Protocol )
|
|
{
|
|
case 0: // Boot Mode
|
|
// Clear modifiers only in boot mode
|
|
USBKeys_Modifiers = 0;
|
|
Scan_finishedWithOutput( USBKeys_Sent <= USB_BOOT_MAX_KEYS ? USBKeys_Sent : USB_BOOT_MAX_KEYS );
|
|
break;
|
|
case 1: // NKRO Mode
|
|
Scan_finishedWithOutput( USBKeys_Sent );
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
// Sets the device into firmware reload mode
|
|
inline void Output_firmwareReload()
|
|
{
|
|
usb_device_reload();
|
|
}
|
|
|
|
|
|
// USB Input buffer available
|
|
inline unsigned int Output_availablechar()
|
|
{
|
|
return usb_serial_available();
|
|
}
|
|
|
|
|
|
// USB Get Character from input buffer
|
|
inline int Output_getchar()
|
|
{
|
|
// XXX Make sure to check output_availablechar() first! Information is lost with the cast (error codes) (AVR)
|
|
return (int)usb_serial_getchar();
|
|
}
|
|
|
|
|
|
// USB Send Character to output buffer
|
|
inline int Output_putchar( char c )
|
|
{
|
|
return usb_serial_putchar( c );
|
|
}
|
|
|
|
|
|
// USB Send String to output buffer, null terminated
|
|
inline int Output_putstr( char* str )
|
|
{
|
|
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_) // AVR
|
|
uint16_t count = 0;
|
|
#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_) // ARM
|
|
uint32_t count = 0;
|
|
#endif
|
|
// Count characters until NULL character, then send the amount counted
|
|
while ( str[count] != '\0' )
|
|
count++;
|
|
|
|
return usb_serial_write( str, count );
|
|
}
|
|
|
|
|
|
// Soft Chip Reset
|
|
inline void Output_softReset()
|
|
{
|
|
usb_device_software_reset();
|
|
}
|
|
|
|
|
|
// Update USB current (mA)
|
|
// Triggers power change event
|
|
void Output_update_usb_current( unsigned int current )
|
|
{
|
|
// Only signal if changed
|
|
if ( current == Output_USBCurrent_Available )
|
|
return;
|
|
|
|
// Update USB current
|
|
Output_USBCurrent_Available = current;
|
|
|
|
unsigned int total_current = Output_current_available();
|
|
info_msg("USB Available Current Changed. Total Available: ");
|
|
printInt32( total_current );
|
|
print(" mA" NL);
|
|
|
|
// Send new total current to the Scan Modules
|
|
Scan_currentChange( Output_current_available() );
|
|
}
|
|
|
|
|
|
// Update external current (mA)
|
|
// Triggers power change event
|
|
void Output_update_external_current( unsigned int current )
|
|
{
|
|
// Only signal if changed
|
|
if ( current == Output_ExtCurrent_Available )
|
|
return;
|
|
|
|
// Update external current
|
|
Output_ExtCurrent_Available = current;
|
|
|
|
unsigned int total_current = Output_current_available();
|
|
info_msg("External Available Current Changed. Total Available: ");
|
|
printInt32( total_current );
|
|
print(" mA" NL);
|
|
|
|
// Send new total current to the Scan Modules
|
|
Scan_currentChange( Output_current_available() );
|
|
}
|
|
|
|
|
|
// Power/Current Available
|
|
unsigned int Output_current_available()
|
|
{
|
|
unsigned int total_current = 0;
|
|
|
|
// Check for USB current source
|
|
total_current += Output_USBCurrent_Available;
|
|
|
|
// Check for external current source
|
|
total_current += Output_ExtCurrent_Available;
|
|
|
|
// XXX If the total available current is still 0
|
|
// Set to 100 mA, which is generally a safe assumption at startup
|
|
// before we've been able to determine actual available current
|
|
if ( total_current == 0 )
|
|
{
|
|
total_current = 100;
|
|
}
|
|
|
|
return total_current;
|
|
}
|
|
|
|
|
|
|
|
// ----- CLI Command Functions -----
|
|
|
|
void cliFunc_kbdProtocol( char* args )
|
|
{
|
|
print( NL );
|
|
info_msg("Keyboard Protocol: ");
|
|
printInt8( USBKeys_Protocol );
|
|
}
|
|
|
|
|
|
void cliFunc_outputDebug( char* args )
|
|
{
|
|
// Parse number from argument
|
|
// NOTE: Only first argument is used
|
|
char* arg1Ptr;
|
|
char* arg2Ptr;
|
|
CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
|
|
|
|
// Default to 1 if no argument is given
|
|
Output_DebugMode = 1;
|
|
|
|
if ( arg1Ptr[0] != '\0' )
|
|
{
|
|
Output_DebugMode = (uint16_t)numToInt( arg1Ptr );
|
|
}
|
|
}
|
|
|
|
|
|
void cliFunc_readLEDs( char* args )
|
|
{
|
|
print( NL );
|
|
info_msg("LED State: ");
|
|
printInt8( USBKeys_LEDs );
|
|
}
|
|
|
|
|
|
void cliFunc_sendKeys( char* args )
|
|
{
|
|
// Copy USBKeys_KeysCLI to USBKeys_Keys
|
|
for ( uint8_t key = 0; key < USBKeys_SentCLI; ++key )
|
|
{
|
|
// TODO
|
|
//USBKeys_Keys[key] = USBKeys_KeysCLI[key];
|
|
}
|
|
USBKeys_Sent = USBKeys_SentCLI;
|
|
|
|
// Set modifier byte
|
|
USBKeys_Modifiers = USBKeys_ModifiersCLI;
|
|
}
|
|
|
|
|
|
void cliFunc_setKeys( char* args )
|
|
{
|
|
char* curArgs;
|
|
char* arg1Ptr;
|
|
char* arg2Ptr = args;
|
|
|
|
// Parse up to USBKeys_MaxSize args (whichever is least)
|
|
for ( USBKeys_SentCLI = 0; USBKeys_SentCLI < USB_BOOT_MAX_KEYS; ++USBKeys_SentCLI )
|
|
{
|
|
curArgs = arg2Ptr;
|
|
CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
|
|
|
|
// Stop processing args if no more are found
|
|
if ( *arg1Ptr == '\0' )
|
|
break;
|
|
|
|
// Add the USB code to be sent
|
|
// TODO
|
|
//USBKeys_KeysCLI[USBKeys_SentCLI] = numToInt( arg1Ptr );
|
|
}
|
|
}
|
|
|
|
|
|
void cliFunc_setMod( char* args )
|
|
{
|
|
// Parse number from argument
|
|
// NOTE: Only first argument is used
|
|
char* arg1Ptr;
|
|
char* arg2Ptr;
|
|
CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
|
|
|
|
USBKeys_ModifiersCLI = numToInt( arg1Ptr );
|
|
}
|
|
|