Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Output/pjrcUSB/output_com.c
2014-03-22 14:14:23 -07:00

118 lines
3.7 KiB
C

/* Copyright (C) 2011-2013 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// ----- Includes -----
// Compiler Includes
#include <Lib/OutputLib.h>
// Project Includes
#include <scan_loop.h>
// USB Includes
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
#include "avr/usb_keyboard_debug.h"
#elif defined(_mk20dx128_) || defined(_mk20dx256_)
#include "arm/usb_keyboard.h"
#include "arm/usb_dev.h"
#endif
// Local Includes
#include "output_com.h"
// ----- Variables -----
// which modifier keys are currently pressed
// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui
// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
uint8_t USBKeys_Modifiers = 0;
// which keys are currently pressed, up to 6 keys may be down at once
uint8_t USBKeys_Array[USB_MAX_KEY_SEND] = {0,0,0,0,0,0};
// The number of keys sent to the usb in the array
uint8_t USBKeys_Sent;
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
volatile uint8_t USBKeys_LEDs = 0;
// protocol setting from the host. We use exactly the same report
// either way, so this variable only stores the setting since we
// are required to be able to report which setting is in use.
uint8_t USBKeys_Protocol = 1;
// the idle configuration, how often we send the report to the
// host (ms * 4) even when it hasn't changed
uint8_t USBKeys_Idle_Config = 125;
// count until idle timeout
uint8_t USBKeys_Idle_Count = 0;
// ----- Functions -----
// USB Module Setup
inline void output_setup()
{
// Initialize the USB, and then wait for the host to set configuration.
// If the Teensy is powered without a PC connected to the USB port,
// this will wait forever.
usb_init();
while ( !usb_configured() ) /* wait */ ;
// Wait an extra second for the PC's operating system to load drivers
// and do whatever it does to actually be ready for input
//_delay_ms(1000); // TODO
}
// USB Data Send
inline void usb_send(void)
{
// TODO undo potentially old keys
for ( uint8_t c = USBKeys_Sent; c < USBKeys_MaxSize; c++ )
USBKeys_Array[c] = 0;
// Send keypresses
usb_keyboard_send();
// Clear modifiers and keys
USBKeys_Modifiers = 0;
USBKeys_Sent = 0;
// Signal Scan Module we are finishedA
scan_finishedWithUSBBuffer( USBKeys_Sent <= USBKeys_MaxSize ? USBKeys_Sent : USBKeys_MaxSize );
}
// Sets the device into firmware reload mode
inline void output_firmwareReload()
{
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
#elif defined(_mk20dx128_) || defined(_mk20dx256_)
usb_device_reload();
#endif
}