Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/setup.cmake
Jacob Alexander b368b13240 Updating CMake build system to prepare for Teensy 3 integration.
- Tested with the AVR builds
- Partially tested with basic ARM test builds
2013-01-26 04:34:33 -05:00

126 lines
3.3 KiB
CMake

###| CMAKE Kiibohd Controller Source Configurator |###
#
# Written by Jacob Alexander in 2011-2013 for the Kiibohd Controller
#
# Released into the Public Domain
#
###
###
# Project Modules
#
#| Note: This is the only section you probably want to modify
#| Each module is defined by it's own folder (e.g. Scan/Matrix represents the "Matrix" module)
#| All of the modules must be specified, as they generate the sources list of files to compile
#| Any modifications to this file will cause a complete rebuild of the project
#| Please the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
##| Deals with acquiring the keypress information and turning it into a key index
set( ScanModule "FACOM6684" )
##| Uses the key index and potentially applies special conditions to it, mapping it to a usb key code
set( MacroModule "buffer" )
##| Sends the current list of usb key codes through USB HID
set( USBModule "pjrc" )
##| Debugging source to use, each module has it's own set of defines that it sets
set( DebugModule "full" )
###
# Module Overrides (Used in the buildall.bash script)
#
if ( ( DEFINED ${ScanModuleOverride} ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) )
set( ScanModule ${ScanModuleOverride} )
endif ( ( DEFINED ${ScanModuleOverride} ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) )
###
# Path Setup
#
set( ScanModulePath "Scan/${ScanModule}" )
set( MacroModulePath "Macro/${MacroModule}" )
set( USBModulePath "USB/${USBModule}" )
set( DebugModulePath "Debug/${DebugModule}" )
#| Top-level directory adjustment
set( HEAD_DIR "${CMAKE_CURRENT_SOURCE_DIR}" )
###
# Module Configuration
#
#| Additional options, usually define settings
add_definitions()
#| Include path for each of the modules
add_definitions(
-I${HEAD_DIR}/${ScanModulePath}
-I${HEAD_DIR}/${MacroModulePath}
-I${HEAD_DIR}/${USBModulePath}
-I${HEAD_DIR}/${DebugModulePath}
)
###
# Module Processing
#
#| Go through lists of sources and append paths
#| Usage:
#| PathPrepend( OutputListOfSources <Prepend Path> <InputListOfSources> )
macro( PathPrepend Output SourcesPath )
unset( tmpSource )
# Loop through items
foreach( item ${ARGN} )
# Set the path
set( tmpSource ${tmpSource} "${SourcesPath}/${item}" )
endforeach( item )
# Finalize by writing the new list back over the old one
set( ${Output} ${tmpSource} )
endmacro( PathPrepend )
#| Scan Module
include ( "${ScanModulePath}/setup.cmake" )
PathPrepend( SCAN_SRCS ${ScanModulePath} ${SCAN_SRCS} )
#| Macro Module
include ( "${MacroModulePath}/setup.cmake" )
PathPrepend( MACRO_SRCS ${MacroModulePath} ${MACRO_SRCS} )
#| USB Module
include ( "${USBModulePath}/setup.cmake" )
PathPrepend( USB_SRCS ${USBModulePath} ${USB_SRCS} )
#| Debugging Module
include ( "${DebugModulePath}/setup.cmake" )
PathPrepend( DEBUG_SRCS ${DebugModulePath} ${DEBUG_SRCS} )
#| Print list of all module sources
message( STATUS "Detected Scan Module Source Files:" )
message( "${SCAN_SRCS}" )
message( STATUS "Detected Macro Module Source Files:" )
message( "${MACRO_SRCS}" )
message( STATUS "Detected USB Module Source Files:" )
message( "${USB_SRCS}" )
message( STATUS "Detected Debug Module Source Files:" )
message( "${DEBUG_SRCS}" )