Arşivlenmiş
1
0
Bu depo arşivlendi. Dosyaları görüntüleyebilir ve klonlayabilirsiniz ama işleme gönderemez veya konu veya değişiklik isteği açamazsınız.
controller/Scan/STLcd/capabilities.kll
Jacob Alexander c0fb084eb4 Adding basic support for LCDLayerDisplay using capabilities
- Requires lcdFuncMap.kll instead of stdFuncMap.kll
2015-08-18 23:52:48 -07:00

77 satır
5.0 KiB
Plaintext

Name = STLcdCapabilities;
Version = 0.1;
Author = "HaaTa (Jacob Alexander) 2015";
KLL = 0.3c;
# Modified Date
Date = 2015-08-01;
# Defines available to the STLcd sub-module
# PWM Prescalar
# In general this can be left alone
# A higher prescalar should be lower power usage (less switching)
# However, flickering may be noticeable.
#
# Here's a calculation table valid at a 72 MHz system clock
# Prescalars range from 0 to 7 (1 to 128)
# Base FTM clock selection (72 MHz system clock)
# @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period
# Higher pre-scalar will use the most power (also look the best)
# Pre-scalar calculations
# 0 - 72 MHz -> 549 Hz
# 1 - 36 MHz -> 275 Hz
# 2 - 18 MHz -> 137 Hz
# 3 - 9 MHz -> 69 Hz (Slightly visible flicker)
# 4 - 4 500 kHz -> 34 Hz (Visible flickering)
# 5 - 2 250 kHz -> 17 Hz
# 6 - 1 125 kHz -> 9 Hz
# 7 - 562 500 Hz -> 4 Hz
STLcdBacklightPrescalar => STLcdBacklightPrescalar_define;
STLcdBacklightPrescalar = 0;
# Default Backlight Channel Brightness
# There are 3 channels, RGB
# In order to get other colors you must mix the 3 colors
# Each channel is a 16-bit register (65536 levels)
# Technically, this means, the backlight is a 48-bit RGB pixel
# In practice, it may be difficult to get color consistency at times if too bright or too dim
STLcdBacklightRed => STLcdBacklightRed_define;
STLcdBacklightGreen => STLcdBacklightGreen_define;
STLcdBacklightBlue => STLcdBacklightBlue_define;
# Defaults to 6% brightness, white
STLcdBacklightRed = 0x0FFF;
STLcdBacklightGreen = 0x0FFF;
STLcdBacklightBlue = 0x0FFF;
# Default LCD Image
#
# The easiest way to generate this data is using the bitmap2Struct.py script in this folder
# It will output the necessary uint8_t array to set here
#
STLcdDefaultImage => STLcdDefaultImage_define;
# Only the data portion is required
# Must be on a single line
STLcdDefaultImage = "
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
";
# Layer Status Display
LCDLayerDisplay => LCD_layerStack_capability();
# LCD Module Enabled
LCDEnabled => LCDEnabled_define;
LCDEnabled = 1;