Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/CMakeLists.txt
Jacob Alexander 9cc29cbffc Fixing CMake 3.6 deprecation message
- CMake 3.6 finally adds proper cross-compiler detection
- When detected, use full compiler detection infrastructure
- Still maintains compatibility back to CMake 2.8 (at least for now)
- With new detection, selecting only the C compiler as it speeds up the CMake generaion process
- Added a GCC 4.9 minimum version requirement for Bootloader
2016-08-07 11:42:26 -07:00

159 lines
4.3 KiB
CMake

###| CMAKE Kiibohd Controller |###
#
# Jacob Alexander 2011-2016
# Due to this file's usefulness:
#
# Released into the Public Domain
#
###
###
# Chip Selection
#
#| You _MUST_ set this to match the microcontroller you are trying to compile for
#| You _MUST_ clean the build directory if you change this value
#|
set( CHIP
# "at90usb162" # Teensy 1.0 (avr)
# "atmega32u4" # Teensy 2.0 (avr)
# "at90usb646" # Teensy++ 1.0 (avr)
# "at90usb1286" # Teensy++ 2.0 (avr)
# "mk20dx128" # Teensy 3.0 (arm)
"mk20dx128vlf5" # McHCK mk20dx128vlf5
# "mk20dx256" # Teensy 3.1,3.2 (arm)
# "mk20dx256vlh7" # Kiibohd-dfu mk20dx256vlh7
CACHE STRING "Microcontroller Chip"
)
###
# Compiler Selection
#
#| gcc has been tested much more (and will likely give smaller binaries)
#| clang does work though
#| Currently only arm is supported with clang
set( COMPILER
"gcc" # arm-none-eabi-gcc / avr-gcc / host-gcc - Default
# "clang" # arm-none-eabi / host
CACHE STRING "Compiler Type"
)
###
# Compiler Intialization
#
set( CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_SOURCE_DIR}/Lib/CMake )
include( initialize )
###
# Project Modules
#
#| Note: This is the only section you probably want to modify
#| Each module is defined by it's own folder (e.g. Scan/Matrix represents the "Matrix" module)
#| All of the modules must be specified, as they generate the sources list of files to compile
#| Any modifications to this file will cause a complete rebuild of the project
#| Please look at the {Scan,Macro,Output,Debug} for information on the modules and how to create new ones
##| Deals with acquiring the keypress information and turning it into a key index
set( ScanModule "MD1"
CACHE STRING "Scan Module" )
##| Provides the mapping functions for DefaultMap and handles any macro processing before sending to the OutputModule
set( MacroModule "PartialMap"
CACHE STRING "Macro Module" )
##| Sends the current list of usb key codes through USB HID
set( OutputModule "pjrcUSB"
CACHE STRING "Output Module"
)
##| Debugging source to use, each module has it's own set of defines that it sets
set( DebugModule "full"
CACHE STRING "Debug Module"
)
###
# Keymap Configuration (do not include the .kll extension)
#
#| Do not include the .kll extension
#| * BaseMap maps the native keyboard scan codes to USB Codes so the layout is compatible with all other layouts
#| * DefaultMap allows the default keymap to be modified from the BaseMap
#| * PartialMaps is a set of dynamically set layers (there is no limit, but too many may use up too much RAM...)
#| BaseMap generally does not need to be changed from "defaultMap"
#|
#| Syntax:
#| myMap
#| * defines a single .kll layout file, double-quotes are needed to distinguish between layers
#| "myMap specialLayer"
#| * defines myMap to be the main layout, then replace specialLayers on top of it
#|
#| - Only for PartialMaps -
#| "myMap specialLayer" "myMap colemak" dvorak
#| * As before, but also generates a second layer at index 2 and third at index 3
#|
#| NOTE: Remember to add key(s) to enable each Partial Layer
#| NOTE2: Layers are always based up the BaseMap (which should be an ANSI-like mapping)
#| NOTE3: Compiler looks in kll/layouts and the build directory for layout files (precedence on build directory)
##| Set the base keyboard .kll map, defaults to "defaultMap" if not found
##| Looks in Scan/<Module Name> for the available BaseMaps
set( BaseMap "defaultMap"
CACHE STRING "KLL BaseMap/Scancode Keymapping" )
##| Layer additonal .kll maps on the BaseMap, layers are in order from 1st to nth
##| Can be set to ""
set( DefaultMap "md1Overlay stdFuncMap"
CACHE STRING "KLL DefaultMap" )
##| ParitalMaps available on top of the BaseMap. See above for syntax on specifying multiple layers vs. layering
##| Can be set to ""
set( PartialMaps "hhkbpro2"
CACHE STRING "KLL PartialMaps/Layer Definitions" )
###
# Source Defines (in addition to the selected Modules)
#
set( MAIN_SRCS
main.c
)
###
# Project Description
#
#| Project
project( kiibohd_controller C )
#| Target Name (output name)
set( TARGET kiibohd )
#| General Settings
cmake_minimum_required( VERSION 2.8 )
###
# Module Initialization / Compilation / Targets
#
include( modules )
include( kll ) # Generate kll layouts if necessary
include( build )