Archived
1
0
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
controller/Macro/buffer/macro.c

395 lines
10 KiB
C

/* Copyright (C) 2011-2014 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// ----- Includes -----
// Compiler Includes
#include <Lib/MacroLib.h>
// Project Includes
#include <led.h>
#include <print.h>
#include <scan_loop.h>
#include <output_com.h>
// Keymaps
#include <keymap.h>
#include <usb_keys.h>
// Local Includes
#include "macro.h"
// ----- Variables -----
// Keeps track of the sequence used to reflash the teensy in software
static uint8_t Bootloader_ConditionSequence[] = {1,16,6,11};
uint8_t Bootloader_ConditionState = 0;
uint8_t Bootloader_NextPositionReady = 1;
uint8_t Bootloader_KeyDetected = 0;
// ----- Functions -----
inline void macro_finishedWithBuffer( uint8_t sentKeys )
{
/* BudKeypad
// Boot loader sequence state handler
switch ( KeyIndex_BufferUsed )
{
// The next bootloader key can now be pressed, if there were no keys processed
case 0:
Bootloader_NextPositionReady = 1;
break;
// If keys were detected, and it wasn't in the sequence (or there was multiple keys detected), start bootloader sequence over
// This case purposely falls through
case 1:
if ( Bootloader_KeyDetected )
break;
default:
Bootloader_ConditionState = 0;
break;
}
Bootloader_KeyDetected = 0;
*/
}
void jumpToBootloader(void)
{
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_) // AVR
cli();
// disable watchdog, if enabled
// disable all peripherals
UDCON = 1;
USBCON = (1<<FRZCLK); // disable USB
UCSR1B = 0;
_delay_ms(5);
#if defined(__AVR_AT90USB162__) // Teensy 1.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
DDRB = 0; DDRC = 0; DDRD = 0;
PORTB = 0; PORTC = 0; PORTD = 0;
asm volatile("jmp 0x3E00");
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0x7E00");
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0xFC00");
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
asm volatile("jmp 0x1FC00");
#endif
#endif
}
// Given a sampling array, and the current number of detected keypress
// Add as many keypresses from the sampling array to the USB key send array as possible.
/*
inline void keyPressDetection( uint8_t *keys, uint8_t numberOfKeys, uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map )
{
uint8_t Bootloader_KeyDetected = 0;
uint8_t processed_keys = 0;
// Parse the detection array starting from 1 (all keys are purposefully mapped from 1 -> total as per typical PCB labels)
for ( uint8_t key = 0; key < numberOfKeys + 1; key++ )
{
if ( keys[key] & (1 << 7) )
{
processed_keys++;
// Display the detected scancode
char tmpStr[4];
int8ToStr( key, tmpStr );
dPrintStrs( tmpStr, " " );
// Is this a bootloader sequence key?
if ( !Bootloader_KeyDetected
&& Bootloader_NextPositionReady
&& key == Bootloader_ConditionSequence[Bootloader_ConditionState] )
{
Bootloader_KeyDetected = 1;
Bootloader_NextPositionReady = 0;
Bootloader_ConditionState++;
}
else if ( Bootloader_ConditionState > 0 && key == Bootloader_ConditionSequence[Bootloader_ConditionState - 1] )
{
Bootloader_KeyDetected = 1;
}
// Determine if the key is a modifier
uint8_t modFound = 0;
for ( uint8_t mod = 0; mod < numberOfModifiers; mod++ ) {
// Modifier found
if ( modifiers[mod] == key ) {
USBKeys_Modifiers |= map[key];
modFound = 1;
break;
}
}
// Modifier, already done this loop
if ( modFound )
continue;
// Too many keys
if ( USBKeys_Sent >= USBKeys_MaxSize )
{
info_print("USB Key limit reached");
errorLED( 1 );
break;
}
// Allow ignoring keys with 0's
if ( map[key] != 0 )
USBKeys_Array[USBKeys_Sent++] = map[key];
}
}
// Boot loader sequence state handler
switch ( processed_keys )
{
// The next bootloader key can now be pressed, if there were no keys processed
case 0:
Bootloader_NextPositionReady = 1;
break;
// If keys were detected, and it wasn't in the sequence (or there was multiple keys detected), start bootloader sequence over
// This case purposely falls through
case 1:
if ( Bootloader_KeyDetected )
break;
default:
Bootloader_ConditionState = 0;
break;
}
// Add debug separator if keys sent via USB
if ( USBKeys_Sent > 0 )
print("\033[1;32m|\033[0m\n");
}
*/
// Scancode Macro Detection
int scancodeMacro( uint8_t scanCode )
{
/*
if ( scanCode == 0x7A )
{
scan_resetKeyboard();
}
else
{
scan_sendData( scanCode );
_delay_ms( 200 );
scan_sendData( 0x80 | scanCode );
}
return 1;
*/
/*
// BudKeypad
// Is this a bootloader sequence key?
if ( !Bootloader_KeyDetected
&& Bootloader_NextPositionReady
&& scanCode == Bootloader_ConditionSequence[Bootloader_ConditionState] )
{
Bootloader_KeyDetected = 1;
Bootloader_NextPositionReady = 0;
Bootloader_ConditionState++;
erro_dPrint("detect");
}
else if ( Bootloader_ConditionState > 0 && scanCode == Bootloader_ConditionSequence[Bootloader_ConditionState - 1] )
{
Bootloader_KeyDetected = 0;
Bootloader_NextPositionReady = 1;
erro_dPrint("detect-again!");
}
// Cancel sequence
else
{
Bootloader_KeyDetected = 0;
Bootloader_NextPositionReady = 1;
Bootloader_ConditionState = 0;
erro_dPrint("Arg");
}
*/
return 0;
}
uint8_t sendCode = 0;
// USBCode Macro Detection
int usbcodeMacro( uint8_t usbCode )
{
// Keyboard Input Test Macro
/*
switch ( usbCode )
{
case KEY_F1:
sendCode--;
//scan_sendData( 0x90 );
scan_sendData( sendCode );
_delay_ms( 200 );
break;
case KEY_F2:
//scan_sendData( 0x90 );
scan_sendData( sendCode );
_delay_ms( 200 );
break;
case KEY_F3:
sendCode++;
//scan_sendData( 0x90 );
scan_sendData( sendCode );
_delay_ms( 200 );
break;
case KEY_F4:
sendCode += 0x10;
//scan_sendData( 0x90 );
scan_sendData( sendCode );
_delay_ms( 200 );
break;
case KEY_F5:
// Set 9th bit to 0
UCSR1B &= ~(1 << 0);
_delay_ms( 200 );
break;
case KEY_F6:
// Set 9th bit to 1
UCSR1B |= (1 << 0);
_delay_ms( 200 );
break;
case KEY_F11:
// Set click code
KeyIndex_Add_InputSignal = sendCode;
_delay_ms( 200 );
break;
default:
return 0;
}
return 1;
*/
return 0;
}
// Given a list of keypresses, translate into the USB key codes
// The buffer is cleared after running
// If the buffer doesn't fit into the USB send array, the extra keys are dropped
void keyPressBufferRead( uint8_t *modifiers, uint8_t numberOfModifiers, uint8_t *map )
{
// Loop through input buffer
for ( uint8_t index = 0; index < KeyIndex_BufferUsed; index++ )
{
// Get the keycode from the buffer
uint8_t key = KeyIndex_Buffer[index];
// Check key for special usages using the scancode
// If non-zero return, ignore normal processing of the scancode
if ( scancodeMacro( key ) )
continue;
// Check key for special usages using the usbcode
// If non-zero return, ignore normal processing of the usbcode
if ( usbcodeMacro( map[key] ) )
continue;
// Determine if the key is a modifier
uint8_t modFound = 0;
for ( uint8_t mod = 0; mod < numberOfModifiers; mod++ ) {
// Modifier found
if ( modifiers[mod] == key ) {
USBKeys_Modifiers |= map[key];
modFound = 1;
break;
}
}
// Modifier, already done this loop
if ( modFound )
continue;
// Too many keys
if ( USBKeys_Sent >= USBKeys_MaxSize )
{
info_print("USB Key limit reached");
errorLED( 1 );
break;
}
// Allow ignoring keys with 0's
if ( map[key] != 0 )
{
USBKeys_Array[USBKeys_Sent++] = map[key];
}
else
{
// Key was not mapped
// TODO Add dead key map
char tmpStr[6];
hexToStr( key, tmpStr );
erro_dPrint( "Key not mapped... - ", tmpStr );
errorLED( 1 );
}
}
// Signal Macro processor that all of the buffered keys have been processed
macro_finishedWithBuffer( KeyIndex_BufferUsed );
// Signal buffer that we've used it
scan_finishedWithBuffer( KeyIndex_BufferUsed );
}
inline void process_macros(void)
{
// Online process macros once (if some were found), until the next USB send
if ( USBKeys_Sent != 0 )
return;
// Query the input buffer for keypresses
keyPressBufferRead( MODIFIER_MASK, sizeof(MODIFIER_MASK), KEYINDEX_MASK );
// Check for bootloader condition
if ( Bootloader_ConditionState == sizeof( Bootloader_ConditionSequence ) )
jumpToBootloader();
}