di0ib/controller
Archived
1
0
Fork 0
Code Releases Activity
This repo is archived. You can view files and clone it, but cannot push or open issues or pull requests.
e645a5063c
controller/Lib/mk20dx128.c
Jacob Alexander c8b4baf652 Adding initial Teensy 3 support, compiles, but not fully functional yet. 
- CDC Output seems to be working
- USB Keyboard output has not been tested, but is "ready"
- UART and Timers have not been tested, or fully utilized
- Issues using Timer 0
- Initial template for MBC-55X Scan module (only module currently compatible with the arm build)
- Updated the interface to the AVR usb module for symmetry with the ARM usb module
- Much gutting was done to the Teensy 3 usb keyboard module, though not in an ideal state yet
2013-01-27 01:47:52 -05:00

329 lines
12 KiB
C
Raw Blame History

#include "mk20dx128.h"
extern unsigned long _stext;
extern unsigned long _etext;
extern unsigned long _sdata;
extern unsigned long _edata;
extern unsigned long _sbss;
extern unsigned long _ebss;
extern unsigned long _estack;
//extern void __init_array_start(void);
//extern void __init_array_end(void);
extern int main (void);
void ResetHandler(void);
void _init_Teensyduino_internal_(void);
void __libc_init_array(void);
void fault_isr(void)
{
while (1); // die
}
void unused_isr(void)
{
while (1); // die
}
extern volatile uint32_t systick_millis_count;
void systick_default_isr(void)
{
systick_millis_count++;
}
void nmi_isr(void) __attribute__ ((weak, alias("unused_isr")));
void hard_fault_isr(void) __attribute__ ((weak, alias("unused_isr")));
void memmanage_fault_isr(void) __attribute__ ((weak, alias("unused_isr")));
void bus_fault_isr(void) __attribute__ ((weak, alias("unused_isr")));
void usage_fault_isr(void) __attribute__ ((weak, alias("unused_isr")));
void svcall_isr(void) __attribute__ ((weak, alias("unused_isr")));
void debugmonitor_isr(void) __attribute__ ((weak, alias("unused_isr")));
void pendablesrvreq_isr(void) __attribute__ ((weak, alias("unused_isr")));
void systick_isr(void) __attribute__ ((weak, alias("systick_default_isr")));
void dma_ch0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void dma_ch1_isr(void) __attribute__ ((weak, alias("unused_isr")));
void dma_ch2_isr(void) __attribute__ ((weak, alias("unused_isr")));
void dma_ch3_isr(void) __attribute__ ((weak, alias("unused_isr")));
void dma_error_isr(void) __attribute__ ((weak, alias("unused_isr")));
void flash_cmd_isr(void) __attribute__ ((weak, alias("unused_isr")));
void flash_error_isr(void) __attribute__ ((weak, alias("unused_isr")));
void low_voltage_isr(void) __attribute__ ((weak, alias("unused_isr")));
void wakeup_isr(void) __attribute__ ((weak, alias("unused_isr")));
void watchdog_isr(void) __attribute__ ((weak, alias("unused_isr")));
void i2c0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void spi0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void i2s0_tx_isr(void) __attribute__ ((weak, alias("unused_isr")));
void i2s0_rx_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart0_lon_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart0_status_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart0_error_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart1_status_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart1_error_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart2_status_isr(void) __attribute__ ((weak, alias("unused_isr")));
void uart2_error_isr(void) __attribute__ ((weak, alias("unused_isr")));
void adc0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void cmp0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void cmp1_isr(void) __attribute__ ((weak, alias("unused_isr")));
void ftm0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void ftm1_isr(void) __attribute__ ((weak, alias("unused_isr")));
void cmt_isr(void) __attribute__ ((weak, alias("unused_isr")));
void rtc_alarm_isr(void) __attribute__ ((weak, alias("unused_isr")));
void rtc_seconds_isr(void) __attribute__ ((weak, alias("unused_isr")));
void pit0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void pit1_isr(void) __attribute__ ((weak, alias("unused_isr")));
void pit2_isr(void) __attribute__ ((weak, alias("unused_isr")));
void pit3_isr(void) __attribute__ ((weak, alias("unused_isr")));
void pdb_isr(void) __attribute__ ((weak, alias("unused_isr")));
void usb_isr(void) __attribute__ ((weak, alias("unused_isr")));
void usb_charge_isr(void) __attribute__ ((weak, alias("unused_isr")));
void tsi0_isr(void) __attribute__ ((weak, alias("unused_isr")));
void mcg_isr(void) __attribute__ ((weak, alias("unused_isr")));
void lptmr_isr(void) __attribute__ ((weak, alias("unused_isr")));
void porta_isr(void) __attribute__ ((weak, alias("unused_isr")));
void portb_isr(void) __attribute__ ((weak, alias("unused_isr")));
void portc_isr(void) __attribute__ ((weak, alias("unused_isr")));
void portd_isr(void) __attribute__ ((weak, alias("unused_isr")));
void porte_isr(void) __attribute__ ((weak, alias("unused_isr")));
void software_isr(void) __attribute__ ((weak, alias("unused_isr")));
// TODO: create AVR-stype ISR() macro, with default linkage to undefined handler
//
__attribute__ ((section(".vectors"), used))
void (* const gVectors[])(void) =
{
(void (*)(void))((unsigned long)&_estack), // 0 ARM: Initial Stack Pointer
ResetHandler, // 1 ARM: Initial Program Counter
nmi_isr, // 2 ARM: Non-maskable Interrupt (NMI)
hard_fault_isr, // 3 ARM: Hard Fault
memmanage_fault_isr, // 4 ARM: MemManage Fault
bus_fault_isr, // 5 ARM: Bus Fault
usage_fault_isr, // 6 ARM: Usage Fault
fault_isr, // 7 --
fault_isr, // 8 --
fault_isr, // 9 --
fault_isr, // 10 --
svcall_isr, // 11 ARM: Supervisor call (SVCall)
debugmonitor_isr, // 12 ARM: Debug Monitor
fault_isr, // 13 --
pendablesrvreq_isr, // 14 ARM: Pendable req serv(PendableSrvReq)
systick_isr, // 15 ARM: System tick timer (SysTick)
dma_ch0_isr, // 16 DMA channel 0 transfer complete
dma_ch1_isr, // 17 DMA channel 1 transfer complete
dma_ch2_isr, // 18 DMA channel 2 transfer complete
dma_ch3_isr, // 19 DMA channel 3 transfer complete
dma_error_isr, // 20 DMA error interrupt channel
unused_isr, // 21 DMA --
flash_cmd_isr, // 22 Flash Memory Command complete
flash_error_isr, // 23 Flash Read collision
low_voltage_isr, // 24 Low-voltage detect/warning
wakeup_isr, // 25 Low Leakage Wakeup
watchdog_isr, // 26 Both EWM and WDOG interrupt
i2c0_isr, // 27 I2C0
spi0_isr, // 28 SPI0
i2s0_tx_isr, // 29 I2S0 Transmit
i2s0_rx_isr, // 30 I2S0 Receive
uart0_lon_isr, // 31 UART0 CEA709.1-B (LON) status
uart0_status_isr, // 32 UART0 status
uart0_error_isr, // 33 UART0 error
uart1_status_isr, // 34 UART1 status
uart1_error_isr, // 35 UART1 error
uart2_status_isr, // 36 UART2 status
uart2_error_isr, // 37 UART2 error
adc0_isr, // 38 ADC0
cmp0_isr, // 39 CMP0
cmp1_isr, // 40 CMP1
ftm0_isr, // 41 FTM0
ftm1_isr, // 42 FTM1
cmt_isr, // 43 CMT
rtc_alarm_isr, // 44 RTC Alarm interrupt
rtc_seconds_isr, // 45 RTC Seconds interrupt
pit0_isr, // 46 PIT Channel 0
pit1_isr, // 47 PIT Channel 1
pit2_isr, // 48 PIT Channel 2
pit3_isr, // 49 PIT Channel 3
pdb_isr, // 50 PDB Programmable Delay Block
usb_isr, // 51 USB OTG
usb_charge_isr, // 52 USB Charger Detect
tsi0_isr, // 53 TSI0
mcg_isr, // 54 MCG
lptmr_isr, // 55 Low Power Timer
porta_isr, // 56 Pin detect (Port A)
portb_isr, // 57 Pin detect (Port B)
portc_isr, // 58 Pin detect (Port C)
portd_isr, // 59 Pin detect (Port D)
porte_isr, // 60 Pin detect (Port E)
software_isr, // 61 Software interrupt
};
//void usb_isr(void)
//{
//}
__attribute__ ((section(".flashconfig"), used))
const uint8_t flashconfigbytes[16] = {
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xFF, 0xFF, 0xFF
};
// Automatically initialize the RTC. When the build defines the compile
// time, and the user has added a crystal, the RTC will automatically
// begin at the time of the first upload.
#ifndef TIME_T
#define TIME_T 1349049600 // default 1 Oct 2012
#endif
extern void rtc_set(unsigned long t);
void startup_unused_hook(void) {}
void startup_early_hook(void) __attribute__ ((weak, alias("startup_unused_hook")));
void startup_late_hook(void) __attribute__ ((weak, alias("startup_unused_hook")));
__attribute__ ((section(".startup")))
void ResetHandler(void)
{
uint32_t *src = &_etext;
uint32_t *dest = &_sdata;
WDOG_UNLOCK = WDOG_UNLOCK_SEQ1;
WDOG_UNLOCK = WDOG_UNLOCK_SEQ2;
WDOG_STCTRLH = WDOG_STCTRLH_ALLOWUPDATE;
startup_early_hook();
// enable clocks to always-used peripherals
SIM_SCGC5 = 0x00043F82; // clocks active to all GPIO
SIM_SCGC6 = SIM_SCGC6_RTC | SIM_SCGC6_FTM0 | SIM_SCGC6_FTM1 | SIM_SCGC6_ADC0 | SIM_SCGC6_FTFL;
// if the RTC oscillator isn't enabled, get it started early
if (!(RTC_CR & RTC_CR_OSCE)) {
RTC_SR = 0;
RTC_CR = RTC_CR_SC16P | RTC_CR_SC4P | RTC_CR_OSCE;
}
// TODO: do this while the PLL is waiting to lock....
while (dest < &_edata) *dest++ = *src++;
dest = &_sbss;
while (dest < &_ebss) *dest++ = 0;
SCB_VTOR = 0; // use vector table in flash
// start in FEI mode
// enable capacitors for crystal
OSC0_CR = OSC_SC8P | OSC_SC2P;
// enable osc, 8-32 MHz range, low power mode
MCG_C2 = MCG_C2_RANGE0(2) | MCG_C2_EREFS;
// switch to crystal as clock source, FLL input = 16 MHz / 512
MCG_C1 = MCG_C1_CLKS(2) | MCG_C1_FRDIV(4);
// wait for crystal oscillator to begin
while ((MCG_S & MCG_S_OSCINIT0) == 0) ;
// wait for FLL to use oscillator
while ((MCG_S & MCG_S_IREFST) != 0) ;
// wait for MCGOUT to use oscillator
while ((MCG_S & MCG_S_CLKST_MASK) != MCG_S_CLKST(2)) ;
// now we're in FBE mode
// config PLL input for 16 MHz Crystal / 4 = 4 MHz
MCG_C5 = MCG_C5_PRDIV0(3);
// config PLL for 96 MHz output
MCG_C6 = MCG_C6_PLLS | MCG_C6_VDIV0(0);
// wait for PLL to start using xtal as its input
while (!(MCG_S & MCG_S_PLLST)) ;
// wait for PLL to lock
while (!(MCG_S & MCG_S_LOCK0)) ;
// now we're in PBE mode
#if F_CPU == 96000000
// config divisors: 96 MHz core, 48 MHz bus, 24 MHz flash
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(1) | SIM_CLKDIV1_OUTDIV4(3);
#elif F_CPU == 48000000
// config divisors: 48 MHz core, 48 MHz bus, 24 MHz flash
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(1) | SIM_CLKDIV1_OUTDIV2(1) | SIM_CLKDIV1_OUTDIV4(3);
#elif F_CPU == 24000000
// config divisors: 24 MHz core, 24 MHz bus, 24 MHz flash
SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIV1(3) | SIM_CLKDIV1_OUTDIV2(3) | SIM_CLKDIV1_OUTDIV4(3);
#else
#error "Error, F_CPU must be 96000000, 48000000, or 24000000"
#endif
// switch to PLL as clock source, FLL input = 16 MHz / 512
MCG_C1 = MCG_C1_CLKS(0) | MCG_C1_FRDIV(4);
// wait for PLL clock to be used
while ((MCG_S & MCG_S_CLKST_MASK) != MCG_S_CLKST(3)) ;
// now we're in PEE mode
// configure USB for 48 MHz clock
SIM_CLKDIV2 = SIM_CLKDIV2_USBDIV(1); // USB = 96 MHz PLL / 2
// USB uses PLL clock, trace is CPU clock, CLKOUT=OSCERCLK0
SIM_SOPT2 = SIM_SOPT2_USBSRC | SIM_SOPT2_PLLFLLSEL | SIM_SOPT2_TRACECLKSEL | SIM_SOPT2_CLKOUTSEL(6);
// initialize the SysTick counter
SYST_RVR = (F_CPU / 1000) - 1;
SYST_CSR = SYST_CSR_CLKSOURCE | SYST_CSR_TICKINT | SYST_CSR_ENABLE;
//init_pins();
__enable_irq();
//_init_Teensyduino_internal_(); XXX HaaTa - Why is this here? Perhaps fixed in a new version of the API?
//if (RTC_SR & RTC_SR_TIF) rtc_set(TIME_T); XXX HaaTa - We don't care about the rtc
__libc_init_array();
/*
for (ptr = &__init_array_start; ptr < &__init_array_end; ptr++) {
(*ptr)();
}
*/
startup_late_hook();
main();
while (1) ;
}
// TODO: is this needed for c++ and where does it come from?
/*
void _init(void)
{
}
*/
void * _sbrk(int incr)
{
static char *heap_end = (char *)&_ebss;
char *prev = heap_end;
heap_end += incr;
return prev;
}
int _read(int file, char *ptr, int len)
{
return 0;
}
int _write(int file, char *ptr, int len)
{
return 0;
}
int _close(int fd)
{
return -1;
}
int _lseek(int fd, long long offset, int whence)
{
return -1;
}
void _exit(int status)
{
while (1);
}
void __cxa_pure_virtual()
{
while (1);
}
View Git Blame Copy Permalink