Tutorial 0 - Introduction ========================= The first two tutorials are intended to be read in sequence: 1. Breadboard keyboard 2. Single-layer keybrd Tutorial 1 is about making a breadboard keyboard, which is used in tutorials 2 through 6. Tutorial 2 is needed to understand the remaining tutorials. The remaining tutorials can be read in any order. You will need a breadboard keyboard with a Teensy 2.0 controller to run tutorial sketches 2 through 6. If you use a different controller, you may have to change pin assignments and port classes. If you already have a keyboard with an Arduino compatible controller, you can use that instead of a breadboard keyboard. All the tutorial sketches use 2 to 8 keys. If your keyboard has more keys, they are simply ignored by the sketch. The tutorials assume the reader: * is familiar with C++ * is new to Arduino, firmware, controllers, and the internal workings of keyboards > Most of the tutorial sketches are obsolete and will not compile. Will be updated soon. > The tutorial sketches will be changed to Teensy LC and MCP23018 I/O expander > Some of the pictures do not match the sketches, they will be updated after changing to Teensy LC > Schematic diagrams are missing from tutorials 2 and 4, they will be added after changing to Teensy LC Creative Commons License
keybrd tutorial by Wolfram Volpi is licensed under a Creative Commons Attribution 4.0 International License.
Permissions beyond the scope of this license may be available at https://github.com/wolfv6/keybrd/issues/new.