1
0
tmk_keyboard/converter/m0110_usb/Makefile.tmk_rev1

96 lines
2.8 KiB
Makefile
Raw Permalink Normal View History

2012-12-05 08:48:03 +00:00
# Target file name (without extension).
2015-07-11 08:01:07 +00:00
TARGET = m0110_lufa
2012-12-05 08:48:03 +00:00
# Directory common source filess exist
2015-04-09 16:53:24 +00:00
TMK_DIR = ../../tmk_core
2012-12-05 08:48:03 +00:00
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = matrix.c \
2012-12-05 08:48:03 +00:00
led.c \
m0110.c
# To use own keymap file run make like: make keymap=hasu
2015-07-11 08:01:07 +00:00
ifdef KEYMAP
SRC += keymap_$(KEYMAP).c
else
2015-07-11 08:01:07 +00:00
SRC += keymap_default.c
endif
2012-12-05 08:48:03 +00:00
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
2015-07-11 08:01:07 +00:00
#MCU = atmega32u2 # TMK converter rev2
MCU = atmega32u4 # TMK converter rev1
2012-12-05 08:48:03 +00:00
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
2015-07-11 08:01:07 +00:00
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096
2012-12-05 08:48:03 +00:00
# Build Options
# *Comment out* to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
2015-07-11 08:01:07 +00:00
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
2012-12-05 08:48:03 +00:00
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH += $(TARGET_DIR)
2015-04-09 07:20:42 +00:00
VPATH += $(TMK_DIR)
2012-12-05 08:48:03 +00:00
2015-07-11 08:01:07 +00:00
include $(TMK_DIR)/protocol/lufa.mk
2015-04-09 07:20:42 +00:00
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk