1
0
tmk_keyboard/converter/ibm4704_usb/README.md

47 lines
1.2 KiB
Markdown
Raw Normal View History

2014-02-08 17:42:17 +00:00
IBM 4704 to USB keyboard converter
2014-02-10 01:01:42 +00:00
==================================
2014-02-08 17:42:17 +00:00
This firmware converts IBM 4704 keyboard protocol to USB HID.
2014-02-10 15:37:19 +00:00
Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**
2014-02-08 17:42:17 +00:00
2014-02-09 22:02:48 +00:00
4704 Connector
--------------
2014-02-10 15:37:19 +00:00
Keyboard Plug from front:
2014-02-09 22:02:48 +00:00
DSUB-9
-------------
\ N 2 3 4 5 /
\ N N N N /
---------
2 GND
3 VCC 5V
4 DATA
5 CLOCK
N No connection/No pin.
Connection
----------
In case of using ATMega32U4(Teensy2.0):
1. Supply power with VCC and GND.
2014-02-10 15:37:19 +00:00
2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
2014-02-09 22:02:48 +00:00
3. Optionally you may need pull-up register. 1KOhm probably work.
2014-02-08 17:42:17 +00:00
Build Firmware
--------------
Just run `make`:
$ make
To select keymap:
$ make KEYMAP=[plain|...]
Keymap
------
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.