1
0
tmk_keyboard/converter/adb_usb/Makefile

120 行
3.4 KiB
Makefile

2011-02-21 14:05:28 +00:00
# Target file name (without extension).
2016-08-29 05:46:34 +00:00
TARGET ?= adb_usb
2011-02-21 14:05:28 +00:00
# Directory common source filess exist
2016-08-29 05:46:34 +00:00
TMK_DIR ?= ../../tmk_core
2011-02-21 14:05:28 +00:00
# Directory keyboard dependent files exist
2016-08-29 05:46:34 +00:00
TARGET_DIR ?= .
2011-02-21 14:05:28 +00:00
# project specific files
2016-08-29 05:46:34 +00:00
SRC ?= matrix.c \
led.c \
adb.c
2011-02-21 14:05:28 +00:00
CONFIG_H = config.h
# MCU name
2015-12-05 01:15:06 +00:00
# atmega32u4 Teensy2.0
# atemga32u4 TMK Converter rev.1
# atemga32u2 TMK Converter rev.2
2016-08-29 05:46:34 +00:00
MCU ?= atmega32u2
2011-02-21 14:05:28 +00:00
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
2016-08-29 05:46:34 +00:00
F_CPU ?= 16000000
2011-02-21 14:05:28 +00:00
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
2016-08-29 05:46:34 +00:00
ARCH ?= AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
2016-08-29 05:46:34 +00:00
F_USB ?= $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
2013-04-09 05:17:31 +00:00
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
2015-12-05 01:15:06 +00:00
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
2013-04-09 05:17:31 +00:00
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
2011-02-21 14:05:28 +00:00
# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
2013-04-09 05:17:31 +00:00
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover
ADB_MOUSE_ENABLE = yes
2016-06-29 11:56:45 +00:00
#UNIMAP_ENABLE = yes
#ACTIONMAP_ENABLE = yes # Use 16bit actionmap instead of 8bit keymap
#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
# ADB Mice need acceleration for todays much bigger screens.
OPT_DEFS += -DADB_MOUSE_MAXACC=8
2011-02-21 14:05:28 +00:00
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
2011-02-21 14:05:28 +00:00
2016-06-29 11:56:45 +00:00
#
# Keymap file
#
ifdef UNIMAP_ENABLE
KEYMAP_FILE = unimap
else
ifdef ACTIONMAP_ENABLE
KEYMAP_FILE = actionmap
else
KEYMAP_FILE = keymap
endif
endif
ifdef KEYMAP
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
else
SRC := $(KEYMAP_FILE)_plain.c $(SRC)
endif
2012-06-30 05:44:59 +00:00
# Search Path
VPATH += $(TARGET_DIR)
2015-04-09 07:20:42 +00:00
VPATH += $(TMK_DIR)
2011-02-21 14:05:28 +00:00
2015-04-09 07:20:42 +00:00
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk