/*
Copyright 2011 Jun Wako <[email protected]>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

/*
 * scan matrix
 */
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "print.h"
#include "util.h"
#include "timer.h"
#include "matrix.h"


// Timer resolution check
#if (1000000/TIMER_RAW_FREQ > 20)
#   error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
#endif

#if (MATRIX_COLS > 16)
#   error "MATRIX_COLS must not exceed 16"
#endif
#if (MATRIX_ROWS > 255)
#   error "MATRIX_ROWS must not exceed 255"
#endif


// matrix state buffer(1:on, 0:off)
#if (MATRIX_COLS <= 8)
static uint8_t *matrix;
static uint8_t *matrix_prev;
static uint8_t _matrix0[MATRIX_ROWS];
static uint8_t _matrix1[MATRIX_ROWS];
#else
static uint16_t *matrix;
static uint16_t *matrix_prev;
static uint16_t _matrix0[MATRIX_ROWS];
static uint16_t _matrix1[MATRIX_ROWS];
#endif

// HHKB has no ghost and no bounce.
#ifdef MATRIX_HAS_GHOST
static bool matrix_has_ghost_in_row(uint8_t row);
#endif


// Matrix I/O ports
//
// row:     HC4051[A,B,C]  selects scan row0-7
// col:     LS145[A,B,C,D] selects scan col0-7 and enable(D)
// key:     on: 0/off: 1
// prev:    unknown: output previous key state(negated)?

#if defined(__AVR_AT90USB1286__)
// Ports for Teensy++
// row:     PB0-2
// col:     PB3-5,6
// key:     PE6(pull-uped)
// prev:    PE7
#define KEY_INIT()              do {    \
    DDRB |= 0x7F;                       \
    DDRE |=  (1<<7);                    \
    DDRE &= ~(1<<6);                    \
    PORTE |= (1<<6);                    \
} while (0)
#define KEY_SELECT(ROW, COL)    (PORTB = (PORTB & 0xC0) |       \
                                         (((COL) & 0x07)<<3) |    \
                                         ((ROW) & 0x07))
#define KEY_ENABLE()            (PORTB &= ~(1<<6))
#define KEY_UNABLE()            (PORTB |=  (1<<6))
#define KEY_STATE()             (PINE & (1<<6))
#define KEY_PREV_ON()           (PORTE |=  (1<<7))
#define KEY_PREV_OFF()          (PORTE &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()

#elif defined(__AVR_ATmega328P__)
// Ports for V-USB
// key:     PB0(pull-uped)
// prev:    PB1
// row:     PB2-4
// col:     PC0-2,3
// power:   PB5(Low:on/Hi-z:off)
#define KEY_INIT()              do {    \
    DDRB  |= 0x3E;                      \
    DDRB  &= ~(1<<0);                   \
    PORTB |= 1<<0;                      \
    DDRC  |= 0x0F;                      \
    KEY_UNABLE();                       \
    KEY_PREV_OFF();                     \
} while (0)
#define KEY_SELECT(ROW, COL)    do {    \
    PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
    PORTC = (PORTC & 0xF8) | ((COL) & 0x07);    \
} while (0)
#define KEY_ENABLE()            (PORTC &= ~(1<<3))
#define KEY_UNABLE()            (PORTC |=  (1<<3))
#define KEY_STATE()             (PINB & (1<<0))
#define KEY_PREV_ON()           (PORTB |=  (1<<1))
#define KEY_PREV_OFF()          (PORTB &= ~(1<<1))
// Power supply switching
#define KEY_POWER_ON()          do {    \
    KEY_INIT();                         \
    PORTB &= ~(1<<5);                   \
    _delay_us(200);                     \
} while (0)
#define KEY_POWER_OFF()         do {    \
    DDRB  &= ~0x3F;                     \
    PORTB &= ~0x3F;                     \
    DDRC  &= ~0x0F;                     \
    PORTC &= ~0x0F;                     \
} while (0)

#else
#   error "define code for matrix scan"
#endif


inline
uint8_t matrix_rows(void)
{
    return MATRIX_ROWS;
}

inline
uint8_t matrix_cols(void)
{
    return MATRIX_COLS;
}

void matrix_init(void)
{
    KEY_INIT();

    // initialize matrix state: all keys off
    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
    matrix = _matrix0;
    matrix_prev = _matrix1;
}

uint8_t matrix_scan(void)
{
    uint8_t *tmp;

    tmp = matrix_prev;
    matrix_prev = matrix;
    matrix = tmp;

    KEY_POWER_ON();
    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
            KEY_SELECT(row, col);
            _delay_us(40);

            // Not sure this is needed. This just emulates HHKB controller's behaviour.
            if (matrix_prev[row] & (1<<col)) {
                KEY_PREV_ON();
            }
            _delay_us(7);

            // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
            // If V-USB interrupts in this section we could lose 40us or so
            // and would read invalid value from KEY_STATE.
            uint8_t last = TIMER_RAW;

            KEY_ENABLE();
            // Wait for KEY_STATE outputs its value.
            // 1us was ok on one HHKB, but not worked on another.
            _delay_us(10);
            if (KEY_STATE()) {
                matrix[row] &= ~(1<<col);
            } else {
                matrix[row] |= (1<<col);
            }

            // Ignore if this code region execution time elapses more than 20us.
            if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) {
                matrix[row] = matrix_prev[row];
            }

            KEY_PREV_OFF();
            KEY_UNABLE();
            // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
            // This takes 25us or more to make sure KEY_STATE returns to idle state.
            _delay_us(150);
        }
    }
    KEY_POWER_OFF();
    return 1;
}

bool matrix_is_modified(void)
{
    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
        if (matrix[i] != matrix_prev[i])
            return true;
    }
    return false;
}

inline
bool matrix_has_ghost(void)
{
#ifdef MATRIX_HAS_GHOST
    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
        if (matrix_has_ghost_in_row(i))
            return true;
    }
#endif
    return false;
}

inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
    return (matrix[row] & (1<<col));
}

inline
#if (MATRIX_COLS <= 8)
uint8_t matrix_get_row(uint8_t row)
#else
uint16_t matrix_get_row(uint8_t row)
#endif
{
    return matrix[row];
}

void matrix_print(void)
{
#if (MATRIX_COLS <= 8)
    print("\nr/c 01234567\n");
#else
    print("\nr/c 0123456789ABCDEF\n");
#endif
    for (uint8_t row = 0; row < matrix_rows(); row++) {
        phex(row); print(": ");
#if (MATRIX_COLS <= 8)
        pbin_reverse(matrix_get_row(row));
#else
        pbin_reverse16(matrix_get_row(row));
#endif
#ifdef MATRIX_HAS_GHOST
        if (matrix_has_ghost_in_row(row)) {
            print(" <ghost");
        }
#endif
        print("\n");
    }
}

uint8_t matrix_key_count(void)
{
    uint8_t count = 0;
    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
#if (MATRIX_COLS <= 8)
        count += bitpop(matrix[i]);
#else
        count += bitpop16(matrix[i]);
#endif
    }
    return count;
}

#ifdef MATRIX_HAS_GHOST
inline
static bool matrix_has_ghost_in_row(uint8_t row)
{
    // no ghost exists in case less than 2 keys on
    if (((matrix[row] - 1) & matrix[row]) == 0)
        return false;

    // ghost exists in case same state as other row
    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
            return true;
    }
    return false;
}
#endif