|
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970 |
- /*
- Copyright 2014 Jun Wako <[email protected]>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x5C01
- #define DEVICE_VER 0x0100
- #define MANUFACTURER t.m.k.
- #define PRODUCT ASCII keyboard converter
- #define DESCRIPTION converts Serial Console Terminal into USB keyboard
-
-
- /* matrix size */
- #define MATRIX_ROWS 16
- #define MATRIX_COLS 16
-
- /* key combination for command */
- #define IS_COMMAND() ( \
- host_get_first_key() == KC_BRK \
- )
-
-
- /*
- * Serial(USART) configuration
- * asynchronous, positive logic, 19200baud, bit order: LSB first
- * 1-start bit, 8-data bit, odd parity, 1-stop bit
- */
- #ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 19200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
- UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \
- sei(); \
- } while(0)
- #else
- #error "USART configuration is needed."
- #endif
-
- /* disable action features */
- #define NO_ACTION_LAYER
- #define NO_ACTION_TAPPING
- #define NO_ACTION_ONESHOT
- #define NO_ACTION_MACRO
- #define NO_ACTION_FUNCTION
-
-
- #endif
|