|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112 |
- /*
- Converter for 70% IBM Terminal Keyboard
- Author: Benjamin Gould, 2013
- Based on code Copyright 2011 Jun Wako <[email protected]>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
-
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x6535
- #define DEVICE_VER 0x0100
- #define MANUFACTURER t.m.k.
- #define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth
- #define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth
-
-
- /* matrix size */
- #define MATRIX_ROWS 17 // keycode bit: 3-0
- #define MATRIX_COLS 8 // keycode bit: 6-4
-
-
- /* legacy keymap support */
- // #define USE_LEGACY_KEYMAP
-
-
- /* key combination for command */
- #define IS_COMMAND() ( \
- (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
- (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
- )
-
- /* USART configuration
- * asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
- */
- #ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 9600
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B = (1<<TXEN1); /* TX: enable */ \
- UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
- (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
- sei(); \
- } while(0)
- #else
- # error "USART configuration is needed."
- #endif
-
- /*
- * PS/2 Interrupt configuration
- */
- #ifdef PS2_USE_INT
- /* uses INT1 for clock line(ATMega32U4) */
- #define PS2_CLOCK_PORT PORTD
- #define PS2_CLOCK_PIN PIND
- #define PS2_CLOCK_DDR DDRD
- #define PS2_CLOCK_BIT 1
-
- #define PS2_DATA_PORT PORTD
- #define PS2_DATA_PIN PIND
- #define PS2_DATA_DDR DDRD
- #define PS2_DATA_BIT 0
-
- #define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
- } while (0)
- #define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
- } while (0)
- #define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
- } while (0)
- #define PS2_INT_VECT INT1_vect
- #endif
-
-
- /*
- * PS/2 Busywait configuration
- */
- #ifdef PS2_USE_BUSYWAIT
- #define PS2_CLOCK_PORT PORTD
- #define PS2_CLOCK_PIN PIND
- #define PS2_CLOCK_DDR DDRD
- #define PS2_CLOCK_BIT 1
-
- #define PS2_DATA_PORT PORTD
- #define PS2_DATA_PIN PIND
- #define PS2_DATA_DDR DDRD
- #define PS2_DATA_BIT 0
- #endif
-
- #endif
|