|
12345678910111213141516171819202122232425262728293031323334353637383940414243444546 |
- ## mf68 keyboard firmware
- ![mf68 1.0 Assembled](mf68.jpg)
- ======================
- mf68 keyboard. 9x8 matrix.
- ![mf68 1.0 PCB Front](pcb-top.png)
- ![mf68 1.0 PCB Bottom](pcb-bottom.png)
-
- Replacement PCB for Magicforce 68. Arduino Pro Micro controller.
-
- Pinout
-
- col: D3 D2 D1 D0 D4 C6 D7 E6 B4
- row: B6 B2 B3 B1 F7 F6 F5 F4
-
- Mosfet on B5 to control backlight.
-
- 6x6mm pushbutton connected between ground and reset pin.
-
- BOM
-
- 1 Pro Micro
- 2 12pin SIP headers (usually comes with chinese Pro Micros)
- 1 Micro USB cable to cut up to make a pigtail
- 68 1n4148 diodes
- 1 6x6mm square tactile switch
-
- Needed if you want LEDs
-
- 68-70 LEDs (68 in switches and 2 additional under spacebar)
- 68-70 Resistors for LEDs. Use online LED caculator to choose value
- 1 FDS6630A SOIC FET
- 1 100ohm resistor (R71)
- 1 100Kilo ohm resistor (R72)
-
- Recycled from original keyboard
-
- 1 Original Plate/Case
- 68 Switches
- 1 Set of keycaps
- 1 Set of stabilizers
- 1 Mini USB cable
-
- If making custom sandwich style case
-
- mini USB connector
- Molex part 54819-0519
|