|
123456789101112131415161718192021222324252627282930313233343536 |
- XT to USB keyboard converter
- ==============================
- This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
-
-
- Connect Wires
- -------------
- In case of Teensy2.0(ATMega32U4):
-
- 1. Connect **Vcc** and **GND**.
- 2. Connect **Clock** and **Data** line.
- - **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
- 3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
-
- To change pin configuration edit **config.h** and **Makefile**.
-
-
- Build Firmware
- --------------
- For **PJRC Teensy** just run `make`:
-
- $ make clean
- $ make
-
- To select keymap:
-
- $ make clean
- $ make KEYMAP=[plain|jis|spacefn|...]
-
- After that you will find HEX file `xt_usb_lufa.hex` in current directory.
-
-
- Keymap
- ------
- Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in README.md of top directory) and existent keymap files.
-
|