tmk_keyboard/converter/ibm4704_usb/README.md

IBM 4704 to USB keyboard converter
==================================
This firmware converts IBM 4704 keyboard protocol to USB HID.

Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**


4704 Connector
--------------
Keyboard Plug from front:

    DSUB-9
    -------------
    \ N 2 3 4 5 /
     \ N N N N /
      ---------
    2   GND
    3   VCC 5V
    4   DATA
    5   CLOCK
    N   No connection/No pin.


Connection
----------
In case of using ATMega32U4(Teensy2.0):

1. Supply power with VCC and GND.
2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
3. Optionally you may need pull-up register. 1KOhm probably work.


Build Firmware
--------------
Just run `make`:

    $ make

To select keymap:

    $ make KEYMAP=[plain|...]


Keymap
------
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
Add Initial files of 4704_usb 2014-02-08 17:42:17 +00:00			`IBM 4704 to USB keyboard converter`
Add keymap_hasu.c 2014-02-10 01:01:42 +00:00			`==================================`
Add Initial files of 4704_usb 2014-02-08 17:42:17 +00:00			`This firmware converts IBM 4704 keyboard protocol to USB HID.`

Change pin configuration 2014-02-10 15:37:19 +00:00			`Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. You need to plug USB cable after hooking up your keyboard to the converter.`

Add Initial files of 4704_usb 2014-02-08 17:42:17 +00:00
Add README.md 2014-02-09 22:02:48 +00:00			`4704 Connector`
			`--------------`
Change pin configuration 2014-02-10 15:37:19 +00:00			`Keyboard Plug from front:`
Add README.md 2014-02-09 22:02:48 +00:00
			`DSUB-9`
			`-------------`
			`\ N 2 3 4 5 /`
			`\ N N N N /`
			`---------`
			`2 GND`
			`3 VCC 5V`
			`4 DATA`
			`5 CLOCK`
			`N No connection/No pin.`


			`Connection`
			`----------`
			`In case of using ATMega32U4(Teensy2.0):`

			`1. Supply power with VCC and GND.`
Change pin configuration 2014-02-10 15:37:19 +00:00			`2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.`
Add README.md 2014-02-09 22:02:48 +00:00			`3. Optionally you may need pull-up register. 1KOhm probably work.`
Add Initial files of 4704_usb 2014-02-08 17:42:17 +00:00

			`Build Firmware`
			`--------------`
			Just run `make`:

			`$ make`

			`To select keymap:`

			`$ make KEYMAP=[plain\|...]`


			`Keymap`
			`------`
			Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.