|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230 |
- Alternative Controller for HHKB pro
- ===================================
- I want to add vi cursor and mouse keys to HHKB. Original HHKB controller is not programmable and
- firmware source code is not open. So, customizing HHKB needs to replace original controller with programmable one.
- I used Teensy++ as alternative controller. Though a Teensy has enough ports to drive HHKB,
- Teensy++ has clean pinout and it makes programing and wiring easier.
-
- This is just a proof of concept for replacing controller of HHKB, not a complete firmware.
-
- My prototype firmware source tree is here:
- branch: hhkb(http://github.com/tmk/tmk_keyboard/tree/hhkb)
- This firmware is a port of my previous project:
- HHKB style Mod(http://geekhack.org/showwiki.php?title=Island:11930)
- PJRC(Teensy++/Teensy)
- http://www.pjrc.com/teensy/
-
-
- Pros:
- * without pattern cuting, case mod and soldering
- * can keep original controller intact
- * can change HHKB behaviour as you like(by C programming)
-
- Cons:
- * void your warranty
- * unavailability of Teensy++/Teensy(because of PS3 cracking boom?)
-
- Features:
- * customized keymap
- * more keymap layers
- * mouse keys for minimum mouse operation(never comfortable for normal use)
- * and more...(in the future)
-
- Any suggestions or ideas are welcome.
-
-
- NOTE:
- My HHKB is just "Professional". This means followings may not be applied to "Professional2".
- DISCLAIMER:
- I'm not a professional for electronics and MCU programming. This may damage your HHKB.
- And my English writing is poor, I'm not sure I can convey my notions accurately.
-
-
- Teensy++ installation
- ---------------------
- Angled USB mini B adapter is used to install Teensy++ laterally.
- (teensy_install.jpg)
-
- Bread baord cables used for connect Teensy++.
- (teensy_wiring.jpg)
- (connector_contact.jpg)
-
-
- HHKB internal
- -------------
- HHKB pro has two PCBs and some chips.
-
- Controller PCB:
- M38K07M4 Renesas MCU with USB function
- http://documentation.renesas.com/eng/products/mpumcu/rej03b0192_38k0ds.pdf
- (HHKB_controller.jpg)
-
- Keyswitch PCB:
- HC4051 Analog Multiplexer: select a row line.
- http://www.alldatasheet.com/datasheet-pdf/pdf/203989/KODENSHI/KK74HC4051A.html
- LS145 BCD Decoder: select a column line.
- http://www.alldatasheet.com/datasheet-pdf/pdf/27373/TI/SN74LS145D.html
- BU9831 Non-volatile electronic potentiometer: for calibration?
- http://www.alldatasheet.com/datasheet-pdf/pdf/36387/ROHM/BU9831.html
- TP1684 Capacitive Sensing controller: no datasheet available.
- (HHKB_keyswitch.jpg)
- Topre original chip?
- (HHKB_TP1684.jpg)
-
-
- Two PCBs are connected by 15 lines. Vcc/GND uses 3 lines each, 9lines for keyboard signaling.
-
- Keyswitch PCB connector Teensy++ pins
- -------------------------------------------------------------------------------
- 1 Vcc(5V) 5V
- 2 Vcc(5V)
- 3 Vcc(5V)
- 4 TP1684 KEY: Low(0) when key pressed PE6 input w/o pullup
- 5 TP1684 unknown:how to use PE7 input w/o pullup
- 6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output
- 7 HC4051 B(bit1) PB1 output
- 8 HC4051 C(bit2) PB2 output
- 9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output
- 10 LS145 B(bit1) PB4 output
- 11 LS145 C(bit2) PB5 output
- 12 LS145 D(enable) Low(0) enable selected column PB6 output
- 13 GND
- 14 GND
- 15 GND GND
- (HHKB_connector.jpg)
-
-
- Keyswitch matrix
- ----------------
- 60 keyswitches in 8*8 matrix. ghost free. bounce free.
-
- COL 0 1 2 3 4 5 6 7
- ROW ---------------------------------------------------------------
- 0| 2 q w s a z x c
- 1| 3 4 r e d f v b
- 2| 5 6 y t g h n _NONE_
- 3| 1 Esc Tab Control LShift LAlt LMeta Space
- 4| 7 8 u i k j m _NONE_
- 5| \ ` Delete Return Fn RShift RAlt RMeta
- 6| 9 0 o p ; l , _NONE_
- 7| - + ] [ ' / . _NONE_
-
-
- Matrix diagram:
- +-------------------------+-+-+-+-+-+-+-+ Vcc
- |bias control? - - - - - - - - ---
- | 3.9K*8 R R R R R R R R |
- +--------^+ +--------+ - - - - - - - - |
- | TP 1684 | | HC4051 <0-------|-|-|-|-|-|-|-|--|R|-+
- | |capa. | <1-------|-|-|-|-|-|-|-|--|R|-+
- | |sense | <2-------|-|-|-|-|-|-|-|--|R|-+
- | <------| <3-------|-|-|-|-|-|-|-|--|R|-+
- | | | <4-------|-|-|-|-|-|-|-|--|R|-+
- | | | <5-------|-|-|-|-|-|-|-|--|R|-+
- | |calib.| <6-------|-|-|-|-|-|-|-|--|R|-+
- | <-+? | <7-------|-|-|-|-|-|-|-|--|R|-+
- +---V-----+ | +-^-^-^--+ 0 1 2 3 4 5 6 7 33K*8
- KEY ??? | A B C +-----------------+
- | | +-^----+ | | | | LS145 |
- Vcc | | |BU9831| | | | +-^--^--^--^------+
- --- | | +------+ | | | A B C D +------+
- | | | | | | | | | | | |
- 1-3 4 5 6 7 8 9 10 11 12 13-15 |
- +--------------------------------------------------+ |
- | connector | ---
- +--------------------------------------------------+ GND
- to controller
-
-
- Signals charts:
- While pressing space bar, watched HHKB original controller signals by logic analyzer.
- Row and column is looping between 0-7 each for selecting a key.
- A key is scaned every about 15ms, so scan rate is 66Hz.
- (HHKB_chart1.jpg)
-
- Space bar locate at ROW:3 COL:7. Key are selected by HC4051(C,B,A) and LS145(C,B,A).
- Key state can be read on TP1684(4/KEY) while asserting low on LS145(D).
- Usage of TP1684(5) is unknown. Key state can be read without using this signal.
- (HHKB_chart2.jpg)
-
-
- Matrix scan pseudo code:
- for (row: 0-7) {
- SELECT_ROW(row); // set HC4051(A,B,C)
-
- for (col: 0-7) {
- SELECT_COL(col); // set LS145(A,B,C)
-
- _delay_us(50);
-
- ENALBLE_COL(); // set LS145(D) to low
-
- _delay_us(10);
-
- if (KEY == 0) { // read TP1684(KEY)
- // key pressed
- } else {
- // not pressed
- }
- }
- }
-
-
- Keymap layers
- -------------
- Followings are added layers with additional Fn keys. They are not final decision.
-
- Layer0(Default Layer):
- ,-----------------------------------------------------------.
- |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
- |-----------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
- |-----------------------------------------------------------|
- |Contro| A| S| D| F| G| H| J| K| L| ;| '|Return |
- |-----------------------------------------------------------|
- |Shift | Z| X| C| V| B| N| M| ,| .| /|Fn2 |Fn1|
- `-----------------------------------------------------------'
- |Gui|Alt |Space |Fn3 |Gui|
- `-------------------------------------------'
-
- Layer1(Fn1) HHKB mode:
- ,-----------------------------------------------------------.
- |Pow| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- |-----------------------------------------------------------|
- |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
- |-----------------------------------------------------------|
- |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
- |-----------------------------------------------------------|
- |Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx|
- `-----------------------------------------------------------'
- |Gui |Alt |Space |Alt |Gui|
- `--------------------------------------------'
-
- Layer2(Fn2) mouse mode:
- ,-----------------------------------------------------------.
- |Esc| | | | | | | | | | | | | | |
- |-----------------------------------------------------------|
- |Tab | | | | | | | | | | | | |Backs|
- |-----------------------------------------------------------|
- |Contro| | | | | | | |MwL|MwD|MwU|MwR|Return |
- |-----------------------------------------------------------|
- |Shift | | | | | | |McL|McD|McU|McR|xxxxxx| |
- `-----------------------------------------------------------'
- |Gui |Alt |Mb1 |Mb1 |Mb2|
- `--------------------------------------------'
-
- Layer3(Fn3) vi mode:
- ,-----------------------------------------------------------.
- |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | |
- |-----------------------------------------------------------|
- |Tab | | | | | |Hom|PgD|PgUlEnd| |MwD|MwU|Backs|
- |-----------------------------------------------------------|
- |Contro| | | | | |Lef|Dow|Up |Rig| | |Return |
- |-----------------------------------------------------------|
- |Shift | | | | | | |McL|McD|McU|McR|Mb1 | |
- `-----------------------------------------------------------'
- |Gui|Alt |Mb1 |xxxxx|Mb2|
- `-------------------------------------------'
- Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
-
- EOF
|