|
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152 |
- NerD keyboard firmware
- ========================
-
- Korean Keyboard designed by GON.
-
- *Note that this is not the official firmware*
-
-
- Hardware revision
- -----------------
-
- This firmware was developed and tested for NerD pcb version 1.61 and 2.0.
-
-
- Supported features
- ------------------
-
- * All layout options are supported
- * All leds are supported
- * 60% and 80% (TKL) pcbs are supported
-
-
- Changing Bootloader
- -------------------
-
- You can't simply just upload this firmware to a new NerD board because the original
- bootloader won't accept DFU connections.
-
- You can change the bootloader of the keyboard with an ISP programmer of your choice.
- The bootloader pins are easy to access on the NerD pcb.
-
- *Be aware that after changing the bootloader the official configuration software
- won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.*
-
-
- Build
- -----
-
- For building you have to specify two build-options, LAYOUT and KEYMAP. The layout option defines
- pcb layout and can be either 60% or 80% at the momemnt. The keymap option selects your
- preferred keymapping.
-
- Move to this directory then just run `make LAYOUT=60 KEYMAP=ansi150`
-
- to compile a firmware for a 60% pcb with ANSI 150 key mapping.
-
-
- Jump to Bootloader
- ------------------
-
- You can jump to bootloader by software if you have a macro defined for this in your keymap. The
- default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump.
|