|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119 |
- /*
- Copyright 2012 Jun Wako <[email protected]>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
- #include <avr/interrupt.h>
-
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x2222
- #define DEVICE_VER 0x0001
- #define MANUFACTURER t.m.k.
- #define PRODUCT serial mouse converter
- #define DESCRIPTION convert serial mouse into USB
-
-
- /* matrix size */
- #define MATRIX_ROWS 0
- #define MATRIX_COLS 0
-
-
- /* key combination for command */
- #define IS_COMMAND() false
-
-
-
- #ifdef SERIAL_MOUSE_MICROSOFT
- /*
- * Serial(USART) configuration (for Microsoft serial mice)
- * asynchronous, positive logic, 1200baud, bit order: LSB first
- * 1-start bit, 7-data bit, no parity, 1-stop bit
- */
- #define SERIAL_UART_BAUD 1200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \
- sei(); \
- } while(0)
-
- // for Microsoft mouse protocol
- /* Serial(USART) configuration
- * asynchronous, negative logic, 1200baud, no flow control
- * 1-start bit, 7-data bit, non parity, 1-stop bit
- */
- #define SERIAL_SOFT_BAUD 1200
- #define SERIAL_SOFT_DATA_7BIT
- #define SERIAL_SOFT_PARITY_NONE
- #define SERIAL_SOFT_BIT_ORDER_LSB
- #define SERIAL_SOFT_LOGIC_NEGATIVE
- /* RXD Port */
- #define SERIAL_SOFT_RXD_DDR DDRD
- #define SERIAL_SOFT_RXD_PORT PORTD
- #define SERIAL_SOFT_RXD_PIN PIND
- #define SERIAL_SOFT_RXD_BIT 2
- #define SERIAL_SOFT_RXD_VECT INT2_vect
- /* RXD Interupt */
- #define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
- SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
- /* enable interrupt: INT2(rising edge) */ \
- EICRA |= ((1<<ISC21)|(1<<ISC20)); \
- EIMSK |= (1<<INT2); \
- sei(); \
- } while (0)
- #define SERIAL_SOFT_RXD_INT_ENTER()
- #define SERIAL_SOFT_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF2); \
- } while (0)
- #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
- /* TXD Port */
- #define SERIAL_SOFT_TXD_HI()
- #define SERIAL_SOFT_TXD_LO()
- #define SERIAL_SOFT_TXD_INIT()
- #elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
- /*
- * Serial(USART) configuration (for Mousesystems serial mice)
- * asynchronous, positive logic, 1200baud, bit order: LSB first
- * 1-start bit, 8-data bit, no parity, 1-stop bit
- */
- #define SERIAL_UART_BAUD 1200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \
- sei(); \
- } while(0)
- #endif
-
-
-
-
- #endif
|