|
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192 |
- /*
- Copyright 2011,2012 Jun WAKO <[email protected]>
-
- This software is licensed with a Modified BSD License.
- All of this is supposed to be Free Software, Open Source, DFSG-free,
- GPL-compatible, and OK to use in both free and proprietary applications.
- Additions and corrections to this file are welcome.
-
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- * Neither the name of the copyright holders nor the names of
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- */
-
- #ifndef M0110_H
- #define M0110_H
-
-
- /* port settings for clock and data line */
- #if !(defined(M0110_CLOCK_PORT) && \
- defined(M0110_CLOCK_PIN) && \
- defined(M0110_CLOCK_DDR) && \
- defined(M0110_CLOCK_BIT))
- # error "M0110 clock port setting is required in config.h"
- #endif
-
- #if !(defined(M0110_DATA_PORT) && \
- defined(M0110_DATA_PIN) && \
- defined(M0110_DATA_DDR) && \
- defined(M0110_DATA_BIT))
- # error "M0110 data port setting is required in config.h"
- #endif
-
- /* Commands */
- #define M0110_INQUIRY 0x10
- #define M0110_INSTANT 0x14
- #define M0110_MODEL 0x16
- #define M0110_TEST 0x36
-
- /* Response(raw byte from M0110) */
- #define M0110_NULL 0x7B
- #define M0110_KEYPAD 0x79
- #define M0110_TEST_ACK 0x7D
- #define M0110_TEST_NAK 0x77
- #define M0110_SHIFT 0x71
- #define M0110_ARROW_UP 0x1B
- #define M0110_ARROW_DOWN 0x11
- #define M0110_ARROW_LEFT 0x0D
- #define M0110_ARROW_RIGHT 0x05
-
- /* This inidcates no response. */
- #define M0110_ERROR 0xFF
-
- /* scan code offset for keypad and arrow keys */
- #define M0110_KEYPAD_OFFSET 0x40
- #define M0110_CALC_OFFSET 0x60
-
-
- extern uint8_t m0110_error;
-
- /* host role */
- void m0110_init(void);
- uint8_t m0110_send(uint8_t data);
- uint8_t m0110_recv(void);
- uint8_t m0110_recv_key(void);
- uint8_t m0110_inquiry(void);
- uint8_t m0110_instant(void);
-
- #endif
|