1
0
tmk_keyboard/keyboard/hhkb_rn42/config.h

111 lines
3.2 KiB
C
Raw Normal View History

2014-06-25 04:57:36 +00:00
/*
Copyright 2011 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
2014-07-17 07:59:22 +00:00
#define PRODUCT_ID 0x4242
2014-06-25 04:57:36 +00:00
#define DEVICE_VER 0x0104
#define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
/* matrix size */
2014-08-20 04:36:15 +00:00
#ifdef HHKB_JP
# define MATRIX_ROWS 16
#else
# define MATRIX_ROWS 8
#endif
2014-06-25 04:57:36 +00:00
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
/* period of tapping(ms) */
#define TAPPING_TERM 300
/* tap count needed for toggling a feature */
#define TAPPING_TOGGLE 5
/* Oneshot timeout(ms) */
#define ONESHOT_TIMEOUT 300
/* Boot Magic salt key: Space */
#define BOOTMAGIC_KEY_SALT KC_FN6
2014-06-30 19:29:45 +00:00
/*
* Hardware Serial(UART)
* Baud rate are calculated with round off(+0.5).
*/
#ifdef __AVR_ATmega32U4__
/* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
#define UCSR1D _SFR_MEM8(0xCB)
#define RTSEN 0
#define CTSEN 1
#define SERIAL_UART_BAUD 115200
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
2014-06-30 19:29:45 +00:00
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
2014-06-30 19:29:45 +00:00
sei(); \
} while(0)
#define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
#define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
2014-06-30 19:29:45 +00:00
#else
#error "USART configuration is needed."
#endif
2014-07-14 06:20:10 +00:00
/* for debug */
#define SUART_OUT_PORT PORTD
#define SUART_OUT_BIT 0
#define SUART_IN_PIN PIND
#define SUART_IN_BIT 1
2014-06-25 04:57:36 +00:00
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif