adb_usb: Update README and Makefiles
This commit is contained in:
tmk
parent
d0f174911e
commit
060c8c55f9
@ -63,8 +63,10 @@ CONFIG_H = config.h
|
|||||||
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
# atmega32u4 Teensy2.0
|
||||||
MCU = atmega32u4
|
# atemga32u4 TMK Converter rev.1
|
||||||
|
# atemga32u2 TMK Converter rev.2
|
||||||
|
MCU = atmega32u2
|
||||||
|
|
||||||
# Processor frequency.
|
# Processor frequency.
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
@ -106,7 +108,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|||||||
# Boot Section Size in *bytes*
|
# Boot Section Size in *bytes*
|
||||||
# Teensy halfKay 512
|
# Teensy halfKay 512
|
||||||
# Teensy++ halfKay 1024
|
# Teensy++ halfKay 1024
|
||||||
# Atmel DFU loader 4096
|
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
|
||||||
# LUFA bootloader 4096
|
# LUFA bootloader 4096
|
||||||
# USBaspLoader 2048
|
# USBaspLoader 2048
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|||||||
@ -1,73 +0,0 @@
|
|||||||
# Target file name (without extension).
|
|
||||||
TARGET = adb_usb_pjrc
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TMK_DIR = ../../tmk_core
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# keyboard dependent files
|
|
||||||
SRC = keymap_common.c \
|
|
||||||
matrix.c \
|
|
||||||
led.c \
|
|
||||||
adb.c
|
|
||||||
|
|
||||||
ifdef KEYMAP
|
|
||||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
|
||||||
else
|
|
||||||
SRC := keymap_ansi.c $(SRC)
|
|
||||||
endif
|
|
||||||
|
|
||||||
CONFIG_H = config.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name, you MUST set this to match the board you are using
|
|
||||||
# type "make clean" after changing this, so all files will be rebuilt
|
|
||||||
#MCU = at90usb162 # Teensy 1.0
|
|
||||||
MCU = atmega32u4 # Teensy 2.0
|
|
||||||
#MCU = at90usb646 # Teensy++ 1.0
|
|
||||||
#MCU = at90usb1286 # Teensy++ 2.0
|
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# Normally the first thing your program should do is set the clock prescaler,
|
|
||||||
# so your program will run at the correct speed. You should also set this
|
|
||||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
|
||||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
|
|
||||||
CONSOLE_ENABLE = yes # Console for debug
|
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
#NKRO_ENABLE = yes # USB Nkey Rollover(+500)
|
|
||||||
ADB_MOUSE_ENABLE = yes
|
|
||||||
|
|
||||||
# ADB Mice need acceleration for todays much bigger screens.
|
|
||||||
OPT_DEFS += -DADB_MOUSE_MAXACC=8
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TMK_DIR)
|
|
||||||
|
|
||||||
include $(TMK_DIR)/protocol/pjrc.mk
|
|
||||||
include $(TMK_DIR)/protocol.mk
|
|
||||||
include $(TMK_DIR)/common.mk
|
|
||||||
include $(TMK_DIR)/rules.mk
|
|
||||||
143
converter/adb_usb/Makefile.rev1
Normal file
143
converter/adb_usb/Makefile.rev1
Normal file
@ -0,0 +1,143 @@
|
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = adb_usb_lufa
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TMK_DIR = ../../tmk_core
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# project specific files
|
||||||
|
SRC = keymap_common.c \
|
||||||
|
matrix.c \
|
||||||
|
led.c \
|
||||||
|
adb.c
|
||||||
|
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := keymap_$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := keymap_ansi.c $(SRC)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
# atmega32u4 Teensy2.0
|
||||||
|
# atemga32u4 TMK Converter rev.1
|
||||||
|
# atemga32u2 TMK Converter rev.2
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
|
ADB_MOUSE_ENABLE = yes
|
||||||
|
|
||||||
|
# ADB Mice need acceleration for todays much bigger screens.
|
||||||
|
OPT_DEFS += -DADB_MOUSE_MAXACC=8
|
||||||
|
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TMK_DIR)
|
||||||
|
|
||||||
|
include $(TMK_DIR)/protocol/lufa.mk
|
||||||
|
include $(TMK_DIR)/protocol.mk
|
||||||
|
include $(TMK_DIR)/common.mk
|
||||||
|
include $(TMK_DIR)/rules.mk
|
||||||
143
converter/adb_usb/Makefile.teensy
Normal file
143
converter/adb_usb/Makefile.teensy
Normal file
@ -0,0 +1,143 @@
|
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Target file name (without extension).
|
||||||
|
TARGET = adb_usb_lufa
|
||||||
|
|
||||||
|
# Directory common source filess exist
|
||||||
|
TMK_DIR = ../../tmk_core
|
||||||
|
|
||||||
|
# Directory keyboard dependent files exist
|
||||||
|
TARGET_DIR = .
|
||||||
|
|
||||||
|
# project specific files
|
||||||
|
SRC = keymap_common.c \
|
||||||
|
matrix.c \
|
||||||
|
led.c \
|
||||||
|
adb.c
|
||||||
|
|
||||||
|
ifdef KEYMAP
|
||||||
|
SRC := keymap_$(KEYMAP).c $(SRC)
|
||||||
|
else
|
||||||
|
SRC := keymap_ansi.c $(SRC)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CONFIG_H = config.h
|
||||||
|
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
# atmega32u4 Teensy2.0
|
||||||
|
# atemga32u4 TMK Converter rev.1
|
||||||
|
# atemga32u2 TMK Converter rev.2
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096 for TMK Converter rev.1/rev.2
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
|
ADB_MOUSE_ENABLE = yes
|
||||||
|
|
||||||
|
# ADB Mice need acceleration for todays much bigger screens.
|
||||||
|
OPT_DEFS += -DADB_MOUSE_MAXACC=8
|
||||||
|
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TMK_DIR)
|
||||||
|
|
||||||
|
include $(TMK_DIR)/protocol/lufa.mk
|
||||||
|
include $(TMK_DIR)/protocol.mk
|
||||||
|
include $(TMK_DIR)/common.mk
|
||||||
|
include $(TMK_DIR)/rules.mk
|
||||||
@ -1,8 +1,7 @@
|
|||||||
ADB to USB keyboard converter
|
ADB to USB keyboard converter
|
||||||
=============================
|
=============================
|
||||||
This firmware converts ADB keyboard protocol to USB.
|
This firmware converts ADB keyboard protocol to USB.
|
||||||
You can use PJRC Teensy for this converter, though, other USB AVR(ATMega32U4, AT90USB64/128 or etc) should work.
|
You can use TMK Converter, PJRC Teensy2.0 and other USB AVR MCU(ATMega32U4, AT90USB64/128 or etc) for this. But binary size is probably more than 10KB and it won't fit into 8K flash.
|
||||||
But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U2.
|
|
||||||
|
|
||||||
Discuss: http://geekhack.org/showwiki.php?title=Island:14290
|
Discuss: http://geekhack.org/showwiki.php?title=Island:14290
|
||||||
|
|
||||||
@ -54,22 +53,34 @@ Define following macros for ADB connection in config.h if you use other than por
|
|||||||
ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
|
ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
|
||||||
|
|
||||||
|
|
||||||
Build
|
Build firmware and Program microcontroller
|
||||||
-----
|
------------------------------------------
|
||||||
See doc/build.md. In short,
|
See [doc/build.md](../../tmk_core/doc/build.md).
|
||||||
|
|
||||||
$ make clean
|
To build firmware:
|
||||||
$ make
|
|
||||||
|
$ make -f Makefile clean
|
||||||
|
$ make -f Makefile
|
||||||
|
|
||||||
You can select keymap(ansi is default) like this:
|
You can select keymap(ansi is default) like this:
|
||||||
|
|
||||||
$ make KEYMAP=[ansi|iso|hasu]
|
$ make -f Makefile KEYMAP=[ansi|iso|hasu]
|
||||||
|
|
||||||
|
To program TMK Converter:
|
||||||
|
|
||||||
|
$ make -f Makefile dfu
|
||||||
|
|
||||||
|
To program Teensy2.0:
|
||||||
|
|
||||||
|
$ make -f Makefile.teensy teensy
|
||||||
|
|
||||||
|
Use **Makefile.rev1** for TMK Converter rev.1 and **Makefile.teensy** for Teensy2.0 instead of **Makefile**. For TMK Converter rev.2 just use **Makefile**.
|
||||||
|
|
||||||
|
|
||||||
Keymap
|
Keymap
|
||||||
------
|
------
|
||||||
You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c.
|
You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c.
|
||||||
How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see doc/keymap.md for more detail.
|
How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see [doc/keymap.md](../../tmk_core/doc/keymap.md) for more detail.
|
||||||
|
|
||||||
|
|
||||||
Magic command
|
Magic command
|
||||||
@ -85,6 +96,12 @@ https://github.com/tmk/tmk_keyboard/blob/master/README.md#mechanical-locking-sup
|
|||||||
Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
|
Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
|
||||||
|
|
||||||
|
|
||||||
|
Mouse support
|
||||||
|
-------------
|
||||||
|
ADB mouse support was added by @mek-apelsin on Apr,2015. It supports only one button as of now.
|
||||||
|
https://github.com/tmk/tmk_keyboard/pull/207
|
||||||
|
|
||||||
|
|
||||||
Notes
|
Notes
|
||||||
-----
|
-----
|
||||||
Not-extended ADB keyboards have no discrimination between right modifier and left one,
|
Not-extended ADB keyboards have no discrimination between right modifier and left one,
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user