di0ib
/
tmk_keyboard
Watch 1
Star 0
Fork 0
Code Releases 4 Activity
Browse Source

Merge branch 'master' of github.com:leizzer/tmk_keyboard

master
leizzer 7 years ago
parent
d13a1d5076 fa32e4d870
commit
112cadb188
16 changed files with 2532 additions and 317 deletions
Split View Show Diff Stats
  1. 34
    25
      converter/ps2_usb/Makefile
  2. 0
    74
      converter/ps2_usb/Makefile.pjrc
  3. 17
    0
      converter/ps2_usb/Makefile.rev1
  4. 17
    0
      converter/ps2_usb/Makefile.rev2
  5. 0
    97
      converter/ps2_usb/Makefile.tmk_rev1
  6. 0
    97
      converter/ps2_usb/Makefile.tmk_rev2
  7. 5
    0
      converter/ps2_usb/Makefile.unimap.rev1
  8. 5
    0
      converter/ps2_usb/Makefile.unimap.rev2
  9. 8
    14
      converter/ps2_usb/README.md
  10. 1288
    0
      converter/ps2_usb/binary/ps2_usb_rev1_unimap.hex
  11. 1003
    0
      converter/ps2_usb/binary/ps2_usb_rev2_unimap.hex
  12. 0
    0
      converter/ps2_usb/config_rev1.h
  13. 0
    0
      converter/ps2_usb/config_rev2.h
  14. 45
    0
      converter/ps2_usb/unimap_plain.c
  15. 100
    0
      converter/ps2_usb/unimap_trans.h
  16. 10
    10
      tmk_core/protocol.mk

+ 34
- 25
converter/ps2_usb/Makefile View File

@@ -1,31 +1,39 @@
#
# Makefile for Teensy
#
# Target file name (without extension).
TARGET = ps2_usb_lufa
TARGET ?= ps2_usb

# Directory common source filess exist
TMK_DIR = ../../tmk_core
TMK_DIR ?= ../../tmk_core

# Directory keyboard dependent files exist
TARGET_DIR = .
TARGET_DIR ?= .

# project specific files
SRC = matrix.c \
SRC ?= matrix.c \
led.c

#
# Keymap file
#
ifdef UNIMAP_ENABLE
KEYMAP_FILE = unimap
else
ifdef ACTIONMAP_ENABLE
KEYMAP_FILE = actionmap
else
KEYMAP_FILE = keymap
endif
endif
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
else
SRC := keymap_plain.c $(SRC)
SRC := $(KEYMAP_FILE)_plain.c $(SRC)
endif

CONFIG_H = config.h
CONFIG_H ?= config.h


# MCU name
#MCU = at90usb1287
MCU = atmega32u4
MCU ?= atmega32u2

# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
@@ -38,14 +46,14 @@ MCU = atmega32u4
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
F_CPU ?= 16000000


#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
ARCH ?= AVR8

# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
@@ -58,7 +66,7 @@ ARCH = AVR8
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
F_USB ?= $(F_CPU)

# Interrupt driven control endpoint task(+60)
#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@@ -70,25 +78,26 @@ F_USB = $(F_CPU)
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
BOOTLOADER_SIZE ?= 4096
OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE)


# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA


# PS/2 Options
#
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
#PS2_USE_USART ?= yes # uses hardware USART engine for PS/2 signal receive(recomened)
PS2_USE_INT ?= yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT ?= yes # uses primitive reference code


# Optimize size but this may cause error "relocation truncated to fit"

+ 0
- 74
converter/ps2_usb/Makefile.pjrc View File

@@ -1,74 +0,0 @@
# Target file name (without extension).
TARGET = ps2_usb_pjrc

# Directory common source filess exist
TMK_DIR = ../../tmk_core

# Directory keyboard dependent files exist
TARGET_DIR = .

# keyboard dependent files
SRC = matrix.c \
led.c

ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_plain.c $(SRC)
endif

CONFIG_H = config.h


# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0


# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000


# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096


# Build Options
# *Comment out* to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover


# PS/2 Options
#
#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
PS2_USE_BUSYWAIT = yes # uses primitive reference code


# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)


include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/protocol/pjrc.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

+ 17
- 0
converter/ps2_usb/Makefile.rev1 View File

@@ -0,0 +1,17 @@
TARGET ?= ps2_usb_rev1
MCU = atmega32u4
CONFIG_H = config_rev1.h
BOOTLOADER_SIZE = 4096

BOOTMAGIC_ENABLE ?= no
MOUSEKEY_ENABLE ?= yes
EXTRAKEY_ENABLE ?= yes
CONSOLE_ENABLE ?= yes
COMMAND_ENABLE ?= yes
NKRO_ENABLE ?= yes

PS2_USE_USART = yes
PS2_USE_INT = no
PS2_USE_BUSYWAIT = no

include Makefile

+ 17
- 0
converter/ps2_usb/Makefile.rev2 View File

@@ -0,0 +1,17 @@
TARGET ?= ps2_usb_rev2
MCU = atmega32u2
CONFIG_H = config_rev2.h
BOOTLOADER_SIZE = 4096

BOOTMAGIC_ENABLE ?= no
MOUSEKEY_ENABLE ?= no
EXTRAKEY_ENABLE ?= yes
CONSOLE_ENABLE ?= yes
COMMAND_ENABLE ?= yes
NKRO_ENABLE ?= yes

PS2_USE_USART = no
PS2_USE_INT = yes
PS2_USE_BUSYWAIT = no

include Makefile

+ 0
- 97
converter/ps2_usb/Makefile.tmk_rev1 View File

@@ -1,97 +0,0 @@
#
# Makefile for TMK keyboard converter rev2
# https://github.com/tmk/keyboard_converter#pcb-rev1
#
# Target file name (without extension).
TARGET = ps2_usb_tmk_rev1

# Directory common source filess exist
TMK_DIR = ../../tmk_core

# Directory keyboard dependent files exist
TARGET_DIR = .

# project specific files
SRC = matrix.c \
led.c

ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_plain.c $(SRC)
endif

CONFIG_H = config_tmk_rev1.h


# MCU name
MCU = atmega32u4

# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000


#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8

# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)


# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096


# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA


# PS/2 Options
#
PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
#PS2_USE_BUSYWAIT = yes # uses primitive reference code


# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)

include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

+ 0
- 97
converter/ps2_usb/Makefile.tmk_rev2 View File

@@ -1,97 +0,0 @@
#
# Makefile for TMK keyboard converter rev2
# https://github.com/tmk/keyboard_converter#pcb-rev2
#
# Target file name (without extension).
TARGET = ps2_usb_tmk_rev2

# Directory common source filess exist
TMK_DIR = ../../tmk_core

# Directory keyboard dependent files exist
TARGET_DIR = .

# project specific files
SRC = matrix.c \
led.c

ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_plain.c $(SRC)
endif

CONFIG_H = config_tmk_rev2.h


# MCU name
MCU = atmega32u2

# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000


#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8

# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)


# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096


# Build Options
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA


# PS/2 Options
#
PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code


# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)

include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

+ 5
- 0
converter/ps2_usb/Makefile.unimap.rev1 View File

@@ -0,0 +1,5 @@
TARGET = ps2_usb_rev1_unimap
UNIMAP_ENABLE = yes
KEYMAP_SECTION_ENABLE = yes

include Makefile.rev1

+ 5
- 0
converter/ps2_usb/Makefile.unimap.rev2 View File

@@ -0,0 +1,5 @@
TARGET = ps2_usb_rev2_unimap
UNIMAP_ENABLE = yes
KEYMAP_SECTION_ENABLE = yes

include Makefile.rev2

+ 8
- 14
converter/ps2_usb/README.md View File

@@ -5,36 +5,30 @@ This firmware converts PS/2 keyboard protocol to USB.(It supports Scan Code Set

Connect Wires
-------------
In case of Teensy2.0(ATMega32U4):

1. Connect **Vcc** and **GND**.
2. Connect **Clock** and **Data** line.
- **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
- **Busywait**: **Clock** is on `PD1` and **Data** on `PD0`.
- **USART**: **Clock** is on `PD5` and **Data** on `PD2`.
3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
3. You need pull-up resistors. 1K-10K Ohm would be fine.

To change pin configuration edit **config.h** and **Makefile**.


Build Firmware
--------------
For **PJRC Teensy** just run `make`:

$ make clean
$ make

To select keymap:
For **TMK converter Rev.2**:

$ make clean
$ make KEYMAP=[plain|jis|spacefn|...]
$ make -f Makefile.rev2 clean
$ make -f Makefile.rev2 KEYMAP=plain

After that you will find HEX file `ps2_usb_lufa.hex` in current directory.
To program firmware push the button on converter and run:

$ make -f Makefile.rev2 KEYMAP=plain dfu

- For **TMK converter Rev.1** use `make -f Makefile.tmk_rev1` instead of `make` and HEX file is `ps2_usb_tmk_rev1.hex`.

- For **TMK converter Rev.2** use `make -f Makefile.tmk_rev2` instead of `make` and HEX file is `ps2_usb_tmk_rev2.hex`.
- For **TMK converter Rev.1** use `make -f Makefile.rev1` instead.
- To select keymap use `jis`, `spacefn` or your own in place of `plain`.


Keymap

+ 1288
- 0
converter/ps2_usb/binary/ps2_usb_rev1_unimap.hex
File diff suppressed because it is too large
View File


+ 1003
- 0
converter/ps2_usb/binary/ps2_usb_rev2_unimap.hex
File diff suppressed because it is too large
View File


converter/ps2_usb/config_tmk_rev1.h → converter/ps2_usb/config_rev1.h View File


converter/ps2_usb/config_tmk_rev2.h → converter/ps2_usb/config_rev2.h View File


+ 45
- 0
converter/ps2_usb/unimap_plain.c View File

@@ -0,0 +1,45 @@
/*
Copyright 2016 Jun Wako <[email protected]>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "unimap_trans.h"


#define AC_FN0 ACTION_LAYER_MOMENTARY(1)

#ifdef KEYMAP_SECTION_ENABLE
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
#else
const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] PROGMEM = {
#endif
UNIMAP(
F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE,
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NO, ENT, P4, P5, P6, PCMM,
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PEQL,
LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,FN0, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
),
UNIMAP(
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP, INS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,LEFT,RGHT, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,END, PGDN,DOWN, TRNS,TRNS, PGUP, TRNS,TRNS,TRNS,TRNS,
TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, HOME,PGDN,END, TRNS, TRNS,TRNS
),
};

+ 100
- 0
converter/ps2_usb/unimap_trans.h View File

@@ -0,0 +1,100 @@
/*
Copyright 2016 Jun Wako <[email protected]>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef UNIMAP_TRNAS_H
#define UNIMAP_TRNAS_H

#include <stdint.h>
#include <avr/pgmspace.h>
#include "unimap.h"


/* Mapping to Universal keyboard layout
*
* Universal keyboard layout
* ,-----------------------------------------------.
* |F13|F14|F15|F16|F17|F18|F19|F20|F21|F22|F23|F24|
* ,---. |-----------------------------------------------| ,-----------. ,-----------.
* |Esc| |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| |PrS|ScL|Pau| |VDn|VUp|Mut|
* `---' `-----------------------------------------------' `-----------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|JPY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -|
* |-----------------------------------------------------------| |-----------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |Del|End|PgD| | 7| 8| 9| +|
* |-----------------------------------------------------------| `-----------' |---------------|
* |CapsL | A| S| D| F| G| H| J| K| L| ;| '| #|Retn| | 4| 5| 6|KP,|
* |-----------------------------------------------------------| ,---. |---------------|
* |Shft| <| Z| X| C| V| B| N| M| ,| .| /| RO|Shift | |Up | | 1| 2| 3|KP=|
* |-----------------------------------------------------------| ,-----------. |---------------|
* |Ctl|Gui|Alt|MHEN| Space |HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| | 0 | .|Ent|
* `-----------------------------------------------------------' `-----------' `---------------'
*
* PS/2 scan codes
* http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
* ,-----------------------------------------------.
* | 08| 10| 18| 20| 28| 30| 38| 40| 48| 50| 57| 5F|
* ,---. |-----------------------------------------------| ,-----------. ,-----------.
* | 76| | 05| 06| 04| 0C| 03| 0B| 83| 0A| 01| 09| 78| 07| | FC| 7E| FE| | A1| B2| A3|
* `---' `-----------------------------------------------' `-----------' `-----------'
* ,-----------------------------------------------------------. ,-----------. ,---------------.
* | 0E| 16| 1E| 26| 25| 2E| 36| 3D| 3E| 46| 45| 4E| 55| 6A| 66| | F0| EC| FD| | 77| CA| 7C| 7B|
* |-----------------------------------------------------------| |-----------| |---------------|
* | 0D | 15| 1D| 24| 2D| 2C| 35| 3C| 43| 44| 4D| 54| 5B| 5D | | F1| E9| FA| | 6C| 75| 7D| 79|
* |-----------------------------------------------------------| `-----------' |---------------|
* | 58 | 1C| 1B| 23| 2B| 34| 33| 3B| 42| 4B| 4C| 52| --| 5A | | 6B| 73| 74| 6D|
* |-----------------------------------------------------------| ,---. |---------------|
* | 12 | 61| 1A| 22| 21| 2A| 32| 31| 3A| 41| 49| 4A| 51| 59 | | F5| | 69| 72| 7A| 0F|
* |-----------------------------------------------------------| ,-----------. |---------------|
* | 14| 9F| 11| 67 | 29 | 64 | 13 | 91| A7| AF| 94| | EB| F2| F4| | 70 | 71| DA|
* `-----------------------------------------------------------' `-----------' `---------------'
*/
const uint8_t PROGMEM unimap_trans[MATRIX_ROWS][MATRIX_COLS] = {
{ UNIMAP_NO, UNIMAP_F9, UNIMAP_NO, UNIMAP_F5, UNIMAP_F3, UNIMAP_F1, UNIMAP_F2, UNIMAP_F12 }, /* 00-07 */
{ UNIMAP_F13, UNIMAP_F10, UNIMAP_F8, UNIMAP_F6, UNIMAP_F4, UNIMAP_TAB, UNIMAP_GRV, UNIMAP_PEQL }, /* 08-0F */
{ UNIMAP_F14, UNIMAP_LALT, UNIMAP_LSHIFT,UNIMAP_KANA, UNIMAP_LCTL, UNIMAP_Q, UNIMAP_1, UNIMAP_NO }, /* 10-17 */
{ UNIMAP_F15, UNIMAP_NO, UNIMAP_Z, UNIMAP_S, UNIMAP_A, UNIMAP_W, UNIMAP_2, UNIMAP_NO }, /* 18-1F */
{ UNIMAP_F16, UNIMAP_C, UNIMAP_X, UNIMAP_D, UNIMAP_E, UNIMAP_4, UNIMAP_3, UNIMAP_NO }, /* 20-27 */
{ UNIMAP_F17, UNIMAP_SPACE, UNIMAP_V, UNIMAP_F, UNIMAP_T, UNIMAP_R, UNIMAP_5, UNIMAP_NO }, /* 28-2F */
{ UNIMAP_F18, UNIMAP_N, UNIMAP_B, UNIMAP_H, UNIMAP_G, UNIMAP_Y, UNIMAP_6, UNIMAP_NO }, /* 30-37 */
{ UNIMAP_F19, UNIMAP_NO, UNIMAP_M, UNIMAP_J, UNIMAP_U, UNIMAP_7, UNIMAP_8, UNIMAP_NO }, /* 38-3F */
{ UNIMAP_F20, UNIMAP_COMMA, UNIMAP_K, UNIMAP_I, UNIMAP_O, UNIMAP_0, UNIMAP_9, UNIMAP_NO }, /* 40-47 */
{ UNIMAP_F21, UNIMAP_DOT, UNIMAP_SLASH, UNIMAP_L, UNIMAP_SCOLON,UNIMAP_P, UNIMAP_MINUS, UNIMAP_NO }, /* 48-4F */
{ UNIMAP_F22, UNIMAP_RO, UNIMAP_QUOTE, UNIMAP_NO, UNIMAP_LBRC, UNIMAP_EQUAL, UNIMAP_NO, UNIMAP_F23 }, /* 50-57 */
{ UNIMAP_CAPS, UNIMAP_RSHIFT,UNIMAP_ENTER, UNIMAP_RBRC, UNIMAP_NO, UNIMAP_BSLASH,UNIMAP_NO, UNIMAP_F24 }, /* 58-5F */
{ UNIMAP_NO, UNIMAP_NUBS, UNIMAP_NO, UNIMAP_NO, UNIMAP_HENK, UNIMAP_NO, UNIMAP_BSPACE,UNIMAP_MHEN }, /* 60-67 */
{ UNIMAP_NO, UNIMAP_P1, UNIMAP_JYEN, UNIMAP_P4, UNIMAP_P7, UNIMAP_PCMM, UNIMAP_NO, UNIMAP_NO }, /* 68-6F */
{ UNIMAP_P0, UNIMAP_PDOT, UNIMAP_P2, UNIMAP_P5, UNIMAP_P6, UNIMAP_P8, UNIMAP_ESC, UNIMAP_NLCK }, /* 70-77 */
{ UNIMAP_F11, UNIMAP_PPLS, UNIMAP_P3, UNIMAP_PMNS, UNIMAP_PAST, UNIMAP_P9, UNIMAP_SLCK, UNIMAP_NO }, /* 78-7F */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_F7, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 80-87 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 88-8F */
{ UNIMAP_NO, UNIMAP_RALT, UNIMAP_NO, UNIMAP_NO, UNIMAP_RCTRL, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 90-97 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_LGUI }, /* 98-9F */
{ UNIMAP_NO, UNIMAP_VOLD, UNIMAP_NO, UNIMAP_MUTE, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_RGUI }, /* A0-A7 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_APP }, /* A8-AF */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_VOLU, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* B0-B7 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* B8-BF */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* C0-C7 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_PSLS, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* C8-CF */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* D0-D7 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_PENT, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* D8-DF */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* E0-E7 */
{ UNIMAP_NO, UNIMAP_END, UNIMAP_NO, UNIMAP_LEFT, UNIMAP_HOME, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* E8-EF */
{ UNIMAP_INS, UNIMAP_DEL, UNIMAP_DOWN, UNIMAP_NO, UNIMAP_RIGHT, UNIMAP_UP, UNIMAP_NO, UNIMAP_NO }, /* F0-F7 */
{ UNIMAP_NO, UNIMAP_NO, UNIMAP_PGDOWN,UNIMAP_NO, UNIMAP_PSCR, UNIMAP_PGUP, UNIMAP_PAUSE, UNIMAP_NO }, /* F8-FF */
};

#endif


+ 10
- 10
tmk_core/protocol.mk View File

@@ -1,59 +1,59 @@
PROTOCOL_DIR = protocol


ifdef PS2_MOUSE_ENABLE
ifeq (yes,$(strip $(PS2_MOUSE_ENABLE)))
SRC += $(PROTOCOL_DIR)/ps2_mouse.c
OPT_DEFS += -DPS2_MOUSE_ENABLE
OPT_DEFS += -DMOUSE_ENABLE
endif

ifdef PS2_USE_BUSYWAIT
ifeq (yes,$(strip $(PS2_USE_BUSYWAIT)))
SRC += protocol/ps2_busywait.c
SRC += protocol/ps2_io_avr.c
OPT_DEFS += -DPS2_USE_BUSYWAIT
endif

ifdef PS2_USE_INT
ifeq (yes,$(strip $(PS2_USE_INT)))
SRC += protocol/ps2_interrupt.c
SRC += protocol/ps2_io_avr.c
OPT_DEFS += -DPS2_USE_INT
endif

ifdef PS2_USE_USART
ifeq (yes,$(strip $(PS2_USE_USART)))
SRC += protocol/ps2_usart.c
SRC += protocol/ps2_io_avr.c
OPT_DEFS += -DPS2_USE_USART
endif


ifdef XT_USE_INT
ifeq (yes,$(strip $(XT_USE_INT)))
SRC += protocol/xt_interrupt.c
SRC += protocol/xt_io_avr.c
OPT_DEFS += -DXT_USE_INT
endif


ifdef SERIAL_MOUSE_MICROSOFT_ENABLE
ifeq (yes,$(strip $(SERIAL_MOUSE_MICROSOFT_ENABLE)))
SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \
-DMOUSE_ENABLE
endif

ifdef SERIAL_MOUSE_MOUSESYSTEMS_ENABLE
ifeq (yes,$(strip $(SERIAL_MOUSE_MOUSESYSTEMS_ENABLE)))
SRC += $(PROTOCOL_DIR)/serial_mouse_mousesystems.c
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MOUSESYSTEMS \
-DMOUSE_ENABLE
endif

ifdef SERIAL_MOUSE_USE_SOFT
ifeq (yes,$(strip $(SERIAL_MOUSE_USE_SOFT)))
SRC += $(PROTOCOL_DIR)/serial_soft.c
endif

ifdef SERIAL_MOUSE_USE_UART
ifeq (yes,$(strip $(SERIAL_MOUSE_USE_UART)))
SRC += $(PROTOCOL_DIR)/serial_uart.c
endif

ifdef ADB_MOUSE_ENABLE
ifeq (yes,$(strip $(ADB_MOUSE_ENABLE)))
OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE
endif


Write Preview
Loading…
Cancel
Save