* http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html | * http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html | ||||
*/ | */ | ||||
// TODO: support usbasp | |||||
/* Boot Section Size in bytes | /* Boot Section Size in bytes | ||||
* Teensy halfKay 512 | * Teensy halfKay 512 | ||||
* Atmel DFU loader 4096 | * Atmel DFU loader 4096 |
# Target file name (without extension). | |||||
TARGET = hbk | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = main.c \ | |||||
keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#---------------- Programming Options -------------------------- | |||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
Makefile.lufa |
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = hbkb_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
OPT_DEFS += -DBOOT_SIZE=4096 | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
# Target file name (without extension). | |||||
TARGET = hbkb | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# keyboard dependent files | |||||
SRC = main.c \ | |||||
keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | |||||
# type "make clean" after changing this, so all files will be rebuilt | |||||
#MCU = at90usb162 # Teensy 1.0 | |||||
MCU = atmega32u4 # Teensy 2.0 | |||||
#MCU = at90usb646 # Teensy++ 1.0 | |||||
#MCU = at90usb1286 # Teensy++ 2.0 | |||||
# Processor frequency. | |||||
# Normally the first thing your program should do is set the clock prescaler, | |||||
# so your program will run at the correct speed. You should also set this | |||||
# variable to same clock speed. The _delay_ms() macro uses this, and many | |||||
# examples use this variable to calculate timings. Do not add a "UL" here. | |||||
F_CPU = 16000000 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#---------------- Programming Options -------------------------- | |||||
#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |||||
PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \ | |||||
/opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start | |||||
include $(TOP_DIR)/protocol/pjrc.mk | |||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0xBB00 | #define PRODUCT_ID 0xBB00 | ||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define DEVICE_VER 0x0100 | |||||
#define PRODUCT Happy Buckling Keyboard | #define PRODUCT Happy Buckling Keyboard | ||||
#define DESCRIPTION mod version of IBM Model M keyboard | #define DESCRIPTION mod version of IBM Model M keyboard | ||||
#---------------------------------------------------------------------------- | |||||
# On command line: | |||||
# | |||||
# make all = Make software. | |||||
# | |||||
# make clean = Clean out built project files. | |||||
# | |||||
# make coff = Convert ELF to AVR COFF. | |||||
# | |||||
# make extcoff = Convert ELF to AVR Extended COFF. | |||||
# | |||||
# make program = Download the hex file to the device. | |||||
# Please customize your programmer settings(PROGRAM_CMD) | |||||
# | |||||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||||
# (must have teensy_loader_cli installed). | |||||
# | |||||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||||
# have dfu-programmer installed). | |||||
# | |||||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||||
# have Atmel FLIP installed). | |||||
# | |||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||||
# (must have dfu-programmer installed). | |||||
# | |||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||||
# (must have Atmel FLIP installed). | |||||
# | |||||
# make debug = Start either simulavr or avarice as specified for debugging, | |||||
# with avr-gdb or avr-insight as the front end for debugging. | |||||
# | |||||
# make filename.s = Just compile filename.c into the assembler code only. | |||||
# | |||||
# make filename.i = Create a preprocessed source file for use in submitting | |||||
# bug reports to the GCC project. | |||||
# | |||||
# To rebuild project do "make clean" then "make all". | |||||
#---------------------------------------------------------------------------- | |||||
# Target file name (without extension). | |||||
TARGET = hhkb_lufa | |||||
# Directory common source filess exist | |||||
TOP_DIR = ../.. | |||||
# Directory keyboard dependent files exist | |||||
TARGET_DIR = . | |||||
# List C source files here. (C dependencies are automatically generated.) | |||||
SRC += keymap.c \ | |||||
matrix.c \ | |||||
led.c | |||||
CONFIG_H = config.h | |||||
# MCU name | |||||
MCU = at90usb1286 | |||||
#MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
#NKRO_ENABLE = yes # USB Nkey Rollover | |||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support | |||||
# Boot Section Size in bytes | |||||
# Teensy halfKay 512 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
#OPT_DEFS += -DBOOT_SIZE=4096 | |||||
# Search Path | |||||
VPATH += $(TARGET_DIR) | |||||
VPATH += $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/lufa.mk | |||||
include $(TOP_DIR)/common.mk | |||||
include $(TOP_DIR)/rules.mk |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c | led.c | ||||
CONFIG_H = config_pjrc.h | |||||
CONFIG_H = config.h | |||||
# MCU name, you MUST set this to match the board you are using | # MCU name, you MUST set this to match the board you are using | ||||
# Search Path | # Search Path | ||||
VPATH = $(TARGET_DIR) | VPATH = $(TARGET_DIR) | ||||
VPATH = $(TOP_DIR) | |||||
include $(TOP_DIR)/protocol/pjrc.mk | include $(TOP_DIR)/protocol/pjrc.mk | ||||
include $(TOP_DIR)/protocol.mk | |||||
include $(TOP_DIR)/common.mk | include $(TOP_DIR)/common.mk | ||||
include $(TOP_DIR)/rules.mk | include $(TOP_DIR)/rules.mk |
/* controller configuration */ | /* controller configuration */ | ||||
#include "controller_teensy.h" | #include "controller_teensy.h" | ||||
#define VENDOR_ID 0xFEED | #define VENDOR_ID 0xFEED | ||||
#define PRODUCT_ID 0xCAFE | |||||
#define PRODUCT_ID 0xCAFF | |||||
#define DEVICE_VER 0x0101 | #define DEVICE_VER 0x0101 | ||||
#define MANUFACTURER t.m.k. | #define MANUFACTURER t.m.k. | ||||
#define PRODUCT HHKB mod | #define PRODUCT HHKB mod | ||||
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod | #define DESCRIPTION t.m.k. keyboard firmware for HHKB mod | ||||
// key: on: 0/off: 1 | // key: on: 0/off: 1 | ||||
// prev: unknown: output previous key state(negated)? | // prev: unknown: output previous key state(negated)? | ||||
#ifdef HOST_PJRC | |||||
// Ports for Teensy | |||||
#if defined(__AVR_AT90USB1286__) | |||||
// Ports for Teensy++ | |||||
// row: PB0-2 | // row: PB0-2 | ||||
// col: PB3-5,6 | // col: PB3-5,6 | ||||
// key: PE6(pull-uped) | // key: PE6(pull-uped) | ||||
#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) | #define KEY_PREV_OFF() (PORTE &= ~(1<<7)) | ||||
#define KEY_POWER_ON() | #define KEY_POWER_ON() | ||||
#define KEY_POWER_OFF() | #define KEY_POWER_OFF() | ||||
#else | |||||
#elif defined(__AVR_ATmega328P__) | |||||
// Ports for V-USB | // Ports for V-USB | ||||
// key: PB0(pull-uped) | // key: PB0(pull-uped) | ||||
// prev: PB1 | // prev: PB1 | ||||
DDRC &= ~0x0F; \ | DDRC &= ~0x0F; \ | ||||
PORTC &= ~0x0F; \ | PORTC &= ~0x0F; \ | ||||
} while (0) | } while (0) | ||||
#else | |||||
# error "define code for matrix scan" | |||||
#endif | #endif | ||||
# Teensy halfKay 512 | # Teensy halfKay 512 | ||||
# Atmel DFU loader 4096 | # Atmel DFU loader 4096 | ||||
# LUFA bootloader 4096 | # LUFA bootloader 4096 | ||||
#ifndef BOOT_SIZE | |||||
#define BOOT_SIZE 512 | |||||
#endif | |||||
#OPT_DEFS += -DBOOT_SIZE=4096 | |||||
# Search Path | # Search Path |
TARGET_DIR = . | TARGET_DIR = . | ||||
# keyboard dependent files | # keyboard dependent files | ||||
SRC = protocol/pjrc/main.c \ | |||||
keymap.c \ | |||||
SRC = keymap.c \ | |||||
matrix.c \ | matrix.c \ | ||||
led.c | led.c | ||||
OPT_DEFS += -DHOST_PJRC | OPT_DEFS += -DHOST_PJRC | ||||
SRC += $(PJRC_DIR)/pjrc.c \ | |||||
SRC += $(PJRC_DIR)/main.c \ | |||||
$(PJRC_DIR)/pjrc.c \ | |||||
$(PJRC_DIR)/usb_keyboard.c \ | $(PJRC_DIR)/usb_keyboard.c \ | ||||
$(PJRC_DIR)/usb_debug.c \ | $(PJRC_DIR)/usb_debug.c \ | ||||
$(PJRC_DIR)/usb.c | $(PJRC_DIR)/usb.c |
dfu-programmer $(MCU) erase | dfu-programmer $(MCU) erase | ||||
dfu-programmer $(MCU) flash $(TARGET).hex | dfu-programmer $(MCU) flash $(TARGET).hex | ||||
dfu-programmer $(MCU) reset | dfu-programmer $(MCU) reset | ||||
dfu-start: | |||||
dfu-programmer $(MCU) reset | |||||
dfu-programmer $(MCU) start | |||||
flip-ee: $(TARGET).hex $(TARGET).eep | flip-ee: $(TARGET).hex $(TARGET).eep | ||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex | $(COPY) $(TARGET).eep $(TARGET)eep.hex | ||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ | .PHONY : all begin finish end sizebefore sizeafter gccversion \ | ||||
build elf hex eep lss sym coff extcoff \ | build elf hex eep lss sym coff extcoff \ | ||||
clean clean_list debug gdb-config show_path \ | clean clean_list debug gdb-config show_path \ | ||||
program teensy dfu flip dfu-ee flip-ee | |||||
program teensy dfu flip dfu-ee flip-ee dfu-start |