Browse Source

Add files via upload

master
di0ib 4 years ago
parent
commit
486e53189f
No account linked to committer's email address

+ 136
- 0
keyboard/contra/Makefile View File

@@ -0,0 +1,136 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = contra
# Directory common source filess exist
TMK_DIR = ../../tmk_core
# Directory keyboard dependent files exist
TARGET_DIR = .
# project specific files
SRC = matrix.c \
led.c \
rgblight.c \
light_ws2812.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
SRC := keymap_contra.c $(SRC)
endif
CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk

+ 83
- 0
keyboard/contra/config.h View File

@@ -0,0 +1,83 @@
/*
Copyright 2012 Jun Wako <[email protected]>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0C00
#define DEVICE_VER 0x0001
#define MANUFACTURER CARTEL
#define PRODUCT The CONTRA Keyboard
#define DESCRIPTION A compact keyboard
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* ws2812 RGB LED */
#define ws2812_PORTREG PORTB
#define ws2812_DDRREG DDRB
#define ws2812_pin PB1
#define RGBLED_NUM 6 // Number of LEDs
#ifndef RGBLIGHT_HUE_STEP
#define RGBLIGHT_HUE_STEP 10
#endif
#ifndef RGBLIGHT_SAT_STEP
#define RGBLIGHT_SAT_STEP 17
#endif
#ifndef RGBLIGHT_VAL_STEP
#define RGBLIGHT_VAL_STEP 17
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

+ 49
- 0
keyboard/contra/keymap_common.h View File

@@ -0,0 +1,49 @@
/*
Copyright 2012,2013 Jun Wako <[email protected]>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include <stdint.h>
#include <stdbool.h>
#include "keycode.h"
#include "action.h"
#include "action_macro.h"
#include "report.h"
#include "host.h"
#include "print.h"
#include "debug.h"
#include "keymap.h"
void gnaplight_toggle(void);
void gnaplight_step(void);
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b \
) \
{ \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0a, KC_##K0b }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1a, KC_##K1b }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2a, KC_##K2b }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3a, KC_##K3b } \
}
#endif

+ 121
- 0
keyboard/contra/keymap_contra.c View File

@@ -0,0 +1,121 @@
#include "keymap_common.h"
#include "rgblight.h"
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KEYMAP(
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
FN2, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN3,
LCTL, LALT, LGUI, APP, FN1, SPC, SPC, FN0, LEFT, DOWN, UP, RGHT
),
KEYMAP(
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DELETE,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS,
TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS,
TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END
),
KEYMAP(
FN6, FN7, FN8, FN9, FN10, FN11, FN12, FN13, FN14, FN15, FN16, DELETE,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN17, FN18, FN19, FN20, FN21,
TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS,
TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END
),
KEYMAP( /* Tab */
ESC, CALC, WHOM, MAIL, MYCM, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
TRNS, FN4, FN5, FN22, FN23, FN24, FN25, FN26, FN27, TRNS, TRNS, TRNS,
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MS_L, MS_D, MS_U, MS_R
),
};
enum function_id {
RGBLED_TOGGLE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
RGBLED_STEP_MODE,
};
const action_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_MOMENTARY(1),
[1] = ACTION_LAYER_MOMENTARY(2),
[2] = ACTION_LAYER_TAP_KEY(3, KC_TAB),
[3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
[4] = ACTION_FUNCTION(RGBLED_TOGGLE),
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE),
[6] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
[7] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
[8] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
[9] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
[22] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[23] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[24] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[25] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[26] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[27] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
case RGBLED_TOGGLE:
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
}
}

+ 38
- 0
keyboard/contra/led.c View File

@@ -0,0 +1,38 @@
/*
Copyright 2012 Jun Wako <[email protected]>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include "stdint.h"
#include "led.h"
void led_set(uint8_t usb_led)
{
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// output low
DDRB |= (1<<0);
PORTB &= ~(1<<0);
DDRD |= (1<<5);
PORTD &= ~(1<<5);
} else {
// Hi-Z
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);
DDRD &= ~(1<<5);
PORTD &= ~(1<<5);
}
}

+ 181
- 0
keyboard/contra/light_ws2812.c View File

@@ -0,0 +1,181 @@
/*
* light weight WS2812 lib V2.0b
*
* Controls WS2811/WS2812/WS2812B RGB-LEDs
* Author: Tim ([email protected])
*
* Jan 18th, 2014 v2.0b Initial Version
* Nov 29th, 2015 v2.3 Added SK6812RGBW support
*
* License: GNU GPL v2 (see License.txt)
*/
#include "light_ws2812.h"
#include <avr/interrupt.h>
#include <avr/io.h>
#include <util/delay.h>
#include "debug.h"
// Setleds for standard RGB
void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds)
{
ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
}
void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask)
{
ws2812_DDRREG |= pinmask; // Enable DDR
ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
_delay_us(50);
}
// Setleds for SK6812RGBW
void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds)
{
ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(ws2812_pin));
_delay_us(80);
}
void ws2812_sendarray(uint8_t *data,uint16_t datlen)
{
ws2812_sendarray_mask(data,datlen,_BV(ws2812_pin));
}
/*
This routine writes an array of bytes with RGB values to the Dataout pin
using the fast 800kHz clockless WS2811/2812 protocol.
*/
// Timing in ns
#define w_zeropulse 350
#define w_onepulse 900
#define w_totalperiod 1250
// Fixed cycles used by the inner loop
#define w_fixedlow 2
#define w_fixedhigh 4
#define w_fixedtotal 8
// Insert NOPs to match the timing, if possible
#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000)
#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000)
#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000)
// w1 - nops between rising edge and falling edge - low
#define w1 (w_zerocycles-w_fixedlow)
// w2 nops between fe low and fe high
#define w2 (w_onecycles-w_fixedhigh-w1)
// w3 nops to complete loop
#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
#if w1>0
#define w1_nops w1
#else
#define w1_nops 0
#endif
// The only critical timing parameter is the minimum pulse length of the "0"
// Warn or throw error if this timing can not be met with current F_CPU settings.
#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
#if w_lowtime>550
#error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
#elif w_lowtime>450
#warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
#warning "Please consider a higher clockspeed, if possible"
#endif
#if w2>0
#define w2_nops w2
#else
#define w2_nops 0
#endif
#if w3>0
#define w3_nops w3
#else
#define w3_nops 0
#endif
#define w_nop1 "nop \n\t"
#define w_nop2 "rjmp .+0 \n\t"
#define w_nop4 w_nop2 w_nop2
#define w_nop8 w_nop4 w_nop4
#define w_nop16 w_nop8 w_nop8
void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
{
uint8_t curbyte,ctr,masklo;
uint8_t sreg_prev;
masklo =~maskhi&ws2812_PORTREG;
maskhi |= ws2812_PORTREG;
sreg_prev=SREG;
cli();
while (datlen--) {
curbyte=*data++;
asm volatile(
" ldi %0,8 \n\t"
"loop%=: \n\t"
" out %2,%3 \n\t" // '1' [01] '0' [01] - re
#if (w1_nops&1)
w_nop1
#endif
#if (w1_nops&2)
w_nop2
#endif
#if (w1_nops&4)
w_nop4
#endif
#if (w1_nops&8)
w_nop8
#endif
#if (w1_nops&16)
w_nop16
#endif
" sbrs %1,7 \n\t" // '1' [03] '0' [02]
" out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low
" lsl %1 \n\t" // '1' [04] '0' [04]
#if (w2_nops&1)
w_nop1
#endif
#if (w2_nops&2)
w_nop2
#endif
#if (w2_nops&4)
w_nop4
#endif
#if (w2_nops&8)
w_nop8
#endif
#if (w2_nops&16)
w_nop16
#endif
" out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high
#if (w3_nops&1)
w_nop1
#endif
#if (w3_nops&2)
w_nop2
#endif
#if (w3_nops&4)
w_nop4
#endif
#if (w3_nops&8)
w_nop8
#endif
#if (w3_nops&16)
w_nop16
#endif
" dec %0 \n\t" // '1' [+2] '0' [+2]
" brne loop%=\n\t" // '1' [+3] '0' [+4]
: "=&d" (ctr)
: "r" (curbyte), "I" (_SFR_IO_ADDR(ws2812_PORTREG)), "r" (maskhi), "r" (masklo)
);
}
SREG=sreg_prev;
}

+ 73
- 0
keyboard/contra/light_ws2812.h View File

@@ -0,0 +1,73 @@
/*
* light weight WS2812 lib include
*
* Version 2.3 - Nev 29th 2015
* Author: Tim ([email protected])
*
* Please do not change this file! All configuration is handled in "ws2812_config.h"
*
* License: GNU GPL v2 (see License.txt)
+
*/
#ifndef LIGHT_WS2812_H_
#define LIGHT_WS2812_H_
#include <avr/io.h>
#include <avr/interrupt.h>
//#include "ws2812_config.h"
/*
* Structure of the LED array
*
* cRGB: RGB for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
* cRGBW: RGBW for SK6812RGBW
*/
struct cRGB { uint8_t g; uint8_t r; uint8_t b; };
struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
/* User Interface
*
* Input:
* ledarray: An array of GRB data describing the LED colors
* number_of_leds: The number of LEDs to write
* pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
*
* The functions will perform the following actions:
* - Set the data-out pin as output
* - Send out the LED data
* - Wait 50�s to reset the LEDs
*/
void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds);
void ws2812_setleds_pin (struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask);
void ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t number_of_leds);
/*
* Old interface / Internal functions
*
* The functions take a byte-array and send to the data output as WS2812 bitstream.
* The length is the number of bytes to send - three per LED.
*/
void ws2812_sendarray (uint8_t *array,uint16_t length);
void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
/*
* Internal defines
*/
#ifndef CONCAT
#define CONCAT(a, b) a ## b
#endif
#ifndef CONCAT_EXP
#define CONCAT_EXP(a, b) CONCAT(a, b)
#endif
// #define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port)
// #define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port)
#endif /* LIGHT_WS2812_H_ */

+ 215
- 0
keyboard/contra/matrix.c View File

@@ -0,0 +1,215 @@
/*
Copyright 2012 Jun Wako <[email protected]>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "rgblight.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
rgblight_init();
}
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11
* pin: F4 F5 B5 B4 E6 D7 C6 D4 D0 D1 D2 D3
*/
static void init_cols(void)
{
// Input with pull-up(DDR:0, PORT:1)
DDRB &= ~(1<<4 | 1<<5);
PORTB |= (1<<4 | 1<<5);
DDRC &= ~(1<<6);
PORTC |= (1<<6);
DDRD &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<7);
PORTD |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<7);
DDRE &= ~(1<<6);
PORTE |= (1<<6);
DDRF &= ~(1<<4 | 1<<5);
PORTF |= (1<<4 | 1<<5);
}
static matrix_row_t read_cols(void)
{
return (PINF&(1<<4) ? 0 : (1<<0)) |
(PINF&(1<<5) ? 0 : (1<<1)) |
(PINB&(1<<5) ? 0 : (1<<2)) |
(PINB&(1<<4) ? 0 : (1<<3)) |
(PINE&(1<<6) ? 0 : (1<<4)) |
(PIND&(1<<7) ? 0 : (1<<5)) |
(PINC&(1<<6) ? 0 : (1<<6)) |
(PIND&(1<<4) ? 0 : (1<<7)) |
(PIND&(1<<0) ? 0 : (1<<8)) |
(PIND&(1<<1) ? 0 : (1<<9)) |
(PIND&(1<<2) ? 0 : (1<<10)) |
(PIND&(1<<3) ? 0 : (1<<11));
}
/* Row pin configuration
* row: 0 1 2 3
* pin: F6 B3 B2 B6
*/
static void unselect_rows(void)
{
// Hi-Z(DDR:0, PORT:0) to unselect
DDRB &= ~0b01001100;
PORTB &= ~0b01001100;
DDRF &= ~0b01000000;
PORTF &= ~0b01000000;
}
static void select_row(uint8_t row)
{
// Output low(DDR:1, PORT:0) to select
switch (row) {
case 0:
DDRF |= (1<<6);
PORTF &= ~(1<<6);
break;
case 1:
DDRB |= (1<<3);
PORTB &= ~(1<<3);
break;
case 2:
DDRB |= (1<<2);
PORTB &= ~(1<<2);
break;
case 3:
DDRB |= (1<<6);
PORTB &= ~(1<<6);
break;
}
}

+ 505
- 0
keyboard/contra/rgblight.c View File

@@ -0,0 +1,505 @@
#include <avr/eeprom.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "progmem.h"
#include "timer.h"
#include "rgblight.h"
#include "debug.h"
const uint8_t DIM_CURVE[] PROGMEM = {
0, 1, 1, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4,
4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 6, 6,
6, 6, 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, 8, 8, 8, 8,
8, 8, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 11, 11, 11,
11, 11, 12, 12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15,
15, 15, 16, 16, 16, 16, 17, 17, 17, 18, 18, 18, 19, 19, 19, 20,
20, 20, 21, 21, 22, 22, 22, 23, 23, 24, 24, 25, 25, 25, 26, 26,
27, 27, 28, 28, 29, 29, 30, 30, 31, 32, 32, 33, 33, 34, 35, 35,
36, 36, 37, 38, 38, 39, 40, 40, 41, 42, 43, 43, 44, 45, 46, 47,
48, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62,
63, 64, 65, 66, 68, 69, 70, 71, 73, 74, 75, 76, 78, 79, 81, 82,
83, 85, 86, 88, 90, 91, 93, 94, 96, 98, 99, 101, 103, 105, 107, 109,
110, 112, 114, 116, 118, 121, 123, 125, 127, 129, 132, 134, 136, 139, 141, 144,
146, 149, 151, 154, 157, 159, 162, 165, 168, 171, 174, 177, 180, 183, 186, 190,
193, 196, 200, 203, 207, 211, 214, 218, 222, 226, 230, 234, 238, 242, 248, 255,
};
const uint8_t RGBLED_BREATHING_TABLE[] PROGMEM = {0,0,0,0,1,1,1,2,2,3,4,5,5,6,7,9,10,11,12,14,15,17,18,20,21,23,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,65,67,70,73,76,79,82,85,88,90,93,97,100,103,106,109,112,115,118,121,124,127,131,134,137,140,143,146,149,152,155,158,162,165,167,170,173,176,179,182,185,188,190,193,196,198,201,203,206,208,211,213,215,218,220,222,224,226,228,230,232,234,235,237,238,240,241,243,244,245,246,248,249,250,250,251,252,253,253,254,254,254,255,255,255,255,255,255,255,254,254,254,253,253,252,251,250,250,249,248,246,245,244,243,241,240,238,237,235,234,232,230,228,226,224,222,220,218,215,213,211,208,206,203,201,198,196,193,190,188,185,182,179,176,173,170,167,165,162,158,155,152,149,146,143,140,137,134,131,128,124,121,118,115,112,109,106,103,100,97,93,90,88,85,82,79,76,73,70,67,65,62,59,57,54,52,49,47,44,42,40,37,35,33,31,29,27,25,23,21,20,18,17,15,14,12,11,10,9,7,6,5,5,4,3,2,2,1,1,1,0,0,0};
const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20};
rgblight_config_t rgblight_config;
rgblight_config_t inmem_config;
struct cRGB led[RGBLED_NUM];
uint8_t rgblight_inited = 0;
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) {
/* convert hue, saturation and brightness ( HSB/HSV ) to RGB
The DIM_CURVE is used only on brightness/value and on saturation (inverted).
This looks the most natural.
*/
uint8_t r, g, b;
val = pgm_read_byte(&DIM_CURVE[val]);
sat = 255 - pgm_read_byte(&DIM_CURVE[255 - sat]);
uint8_t base;
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
r = val;
g = val;
b = val;
} else {
base = ((255 - sat) * val) >> 8;
switch (hue / 60) {
case 0:
r = val;
g = (((val - base)*hue) / 60) + base;
b = base;
break;
case 1:
r = (((val - base)*(60 - (hue % 60))) / 60) + base;
g = val;
b = base;
break;
case 2:
r = base;
g = val;
b = (((val - base)*(hue % 60)) / 60) + base;
break;
case 3:
r = base;
g = (((val - base)*(60 - (hue % 60))) / 60) + base;
b = val;
break;
case 4:
r = (((val - base)*(hue % 60)) / 60) + base;
g = base;
b = val;
break;
case 5:
r = val;
g = base;
b = (((val - base)*(60 - (hue % 60))) / 60) + base;
break;
}
}
setrgb(r,g,b, led1);
}
void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) {
(*led1).r = r;
(*led1).g = g;
(*led1).b = b;
}
uint32_t eeconfig_read_rgblight(void) {
return eeprom_read_dword(EECONFIG_RGBLIGHT);
}
void eeconfig_write_rgblight(uint32_t val) {
eeprom_write_dword(EECONFIG_RGBLIGHT, val);
}
void eeconfig_write_rgblight_default(void) {
dprintf("eeconfig_write_rgblight_default\n");
rgblight_config.enable = 1;
rgblight_config.mode = 1;
rgblight_config.hue = 200;
rgblight_config.sat = 204;
rgblight_config.val = 204;
eeconfig_write_rgblight(rgblight_config.raw);
}
void eeconfig_debug_rgblight(void) {
dprintf("rgblight_config eprom\n");
dprintf("rgblight_config.enable = %d\n", rgblight_config.enable);
dprintf("rghlight_config.mode = %d\n", rgblight_config.mode);
dprintf("rgblight_config.hue = %d\n", rgblight_config.hue);
dprintf("rgblight_config.sat = %d\n", rgblight_config.sat);
dprintf("rgblight_config.val = %d\n", rgblight_config.val);
}
void rgblight_init(void) {
debug_enable = 1; // Debug ON!
dprintf("rgblight_init called.\n");
rgblight_inited = 1;
dprintf("rgblight_init start!\n");
if (!eeconfig_is_enabled()) {
dprintf("rgblight_init eeconfig is not enabled.\n");
eeconfig_init();
eeconfig_write_rgblight_default();
}
rgblight_config.raw = eeconfig_read_rgblight();
if (!rgblight_config.mode) {
dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n");
eeconfig_write_rgblight_default();
rgblight_config.raw = eeconfig_read_rgblight();
}
eeconfig_debug_rgblight(); // display current eeprom values
rgblight_timer_init(); // setup the timer
if (rgblight_config.enable) {
rgblight_mode(rgblight_config.mode);
}
}
void rgblight_increase(void) {
uint8_t mode;
if (rgblight_config.mode < RGBLIGHT_MODES) {
mode = rgblight_config.mode + 1;
}
rgblight_mode(mode);
}
void rgblight_decrease(void) {
uint8_t mode;
if (rgblight_config.mode > 1) { //mode will never < 1, if mode is less than 1, eeprom need to be initialized.
mode = rgblight_config.mode-1;
}
rgblight_mode(mode);
}
void rgblight_step(void) {
uint8_t mode;
mode = rgblight_config.mode + 1;
if (mode > RGBLIGHT_MODES) {
mode = 1;
}
rgblight_mode(mode);
}
void rgblight_mode(uint8_t mode) {
if (!rgblight_config.enable) {
return;
}
if (mode<1) {
rgblight_config.mode = 1;
} else if (mode > RGBLIGHT_MODES) {
rgblight_config.mode = RGBLIGHT_MODES;
} else {
rgblight_config.mode = mode;
}
eeconfig_write_rgblight(rgblight_config.raw);
dprintf("rgblight mode: %u\n", rgblight_config.mode);
if (rgblight_config.mode == 1) {
rgblight_timer_disable();
} else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) {
// MODE 2-5, breathing
// MODE 6-8, rainbow mood
// MODE 9-14, rainbow swirl
// MODE 15-20, snake
// MODE 21-23, knight
rgblight_timer_enable();
}
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
}
void rgblight_toggle(void) {
rgblight_config.enable ^= 1;
eeconfig_write_rgblight(rgblight_config.raw);
dprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable);
if (rgblight_config.enable) {
rgblight_mode(rgblight_config.mode);
} else {
rgblight_timer_disable();
_delay_ms(50);
rgblight_set();
}
}
void rgblight_increase_hue(void){
uint16_t hue;
hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360;
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
}
void rgblight_decrease_hue(void){
uint16_t hue;
if (rgblight_config.hue-RGBLIGHT_HUE_STEP <0 ) {
hue = (rgblight_config.hue+360-RGBLIGHT_HUE_STEP) % 360;
} else {
hue = (rgblight_config.hue-RGBLIGHT_HUE_STEP) % 360;
}
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
}
void rgblight_increase_sat(void) {
uint8_t sat;
if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) {
sat = 255;
} else {
sat = rgblight_config.sat+RGBLIGHT_SAT_STEP;
}
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
}
void rgblight_decrease_sat(void){
uint8_t sat;
if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) {
sat = 0;
} else {
sat = rgblight_config.sat-RGBLIGHT_SAT_STEP;
}
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
}
void rgblight_increase_val(void){
uint8_t val;
if (rgblight_config.val + RGBLIGHT_VAL_STEP > 255) {
val = 255;
} else {
val = rgblight_config.val+RGBLIGHT_VAL_STEP;
}
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
}
void rgblight_decrease_val(void) {
uint8_t val;
if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) {
val = 0;
} else {
val = rgblight_config.val-RGBLIGHT_VAL_STEP;
}
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
}
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val){
inmem_config.raw = rgblight_config.raw;
if (rgblight_config.enable) {
struct cRGB tmp_led;
sethsv(hue, sat, val, &tmp_led);
inmem_config.hue = hue;
inmem_config.sat = sat;
inmem_config.val = val;
// dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val);
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
}
}
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val){
if (rgblight_config.enable) {
if (rgblight_config.mode == 1) {
// same static color
rgblight_sethsv_noeeprom(hue, sat, val);
} else {
// all LEDs in same color
if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
// breathing mode, ignore the change of val, use in memory value instead
val = rgblight_config.val;
} else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) {
// rainbow mood and rainbow swirl, ignore the change of hue
hue = rgblight_config.hue;
}
}
rgblight_config.hue = hue;
rgblight_config.sat = sat;
rgblight_config.val = val;
eeconfig_write_rgblight(rgblight_config.raw);
dprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
}
}
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b){
// dprintf("rgblight set rgb: %u,%u,%u\n", r,g,b);
for (uint8_t i=0;i<RGBLED_NUM;i++) {
led[i].r = r;
led[i].g = g;
led[i].b = b;
}
rgblight_set();
}
void rgblight_set(void) {
if (rgblight_config.enable) {
ws2812_setleds(led, RGBLED_NUM);
} else {
for (uint8_t i=0;i<RGBLED_NUM;i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
ws2812_setleds(led, RGBLED_NUM);
}
}
// Animation timer -- AVR Timer3
void rgblight_timer_init(void) {
static uint8_t rgblight_timer_is_init = 0;
if (rgblight_timer_is_init) {
return;
}
rgblight_timer_is_init = 1;
/* Timer 3 setup */
TCCR3B = _BV(WGM32) //CTC mode OCR3A as TOP
| _BV(CS30); //Clock selelct: clk/1
/* Set TOP value */
uint8_t sreg = SREG;
cli();
OCR3AH = (RGBLED_TIMER_TOP>>8)&0xff;
OCR3AL = RGBLED_TIMER_TOP&0xff;
SREG = sreg;
}
void rgblight_timer_enable(void) {
TIMSK3 |= _BV(OCIE3A);
dprintf("TIMER3 enabled.\n");
}
void rgblight_timer_disable(void) {
TIMSK3 &= ~_BV(OCIE3A);
dprintf("TIMER3 disabled.\n");
}
void rgblight_timer_toggle(void) {
TIMSK3 ^= _BV(OCIE3A);
dprintf("TIMER3 toggled.\n");
}
ISR(TIMER3_COMPA_vect) {
// Mode = 1, static light, do nothing here
if (rgblight_config.mode>=2 && rgblight_config.mode<=5) {
// mode = 2 to 5, breathing mode
rgblight_effect_breathing(rgblight_config.mode-2);
} else if (rgblight_config.mode>=6 && rgblight_config.mode<=8) {
rgblight_effect_rainbow_mood(rgblight_config.mode-6);
} else if (rgblight_config.mode>=9 && rgblight_config.mode<=14) {
rgblight_effect_rainbow_swirl(rgblight_config.mode-9);
} else if (rgblight_config.mode>=15 && rgblight_config.mode<=20) {
rgblight_effect_snake(rgblight_config.mode-15);
} else if (rgblight_config.mode>=21 && rgblight_config.mode<=23) {
rgblight_effect_knight(rgblight_config.mode-21);
}
}
// effects
void rgblight_effect_breathing(uint8_t interval) {
static uint8_t pos = 0;
static uint16_t last_timer = 0;
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) return;
last_timer = timer_read();
rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, pgm_read_byte(&RGBLED_BREATHING_TABLE[pos]));
pos = (pos+1) % 256;
}
void rgblight_effect_rainbow_mood(uint8_t interval) {
static uint16_t current_hue=0;
static uint16_t last_timer = 0;
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) return;
last_timer = timer_read();
rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val);
current_hue = (current_hue+1) % 360;
}
void rgblight_effect_rainbow_swirl(uint8_t interval) {
static uint16_t current_hue=0;
static uint16_t last_timer = 0;
uint16_t hue;
uint8_t i;
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval/2])) return;
last_timer = timer_read();
for (i=0; i<RGBLED_NUM; i++) {
hue = (360/RGBLED_NUM*i+current_hue)%360;
sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]);
}
rgblight_set();
if (interval % 2) {
current_hue = (current_hue+1) % 360;
} else {
if (current_hue -1 < 0) {
current_hue = 359;
} else {
current_hue = current_hue - 1;
}
}
}
void rgblight_effect_snake(uint8_t interval) {
static uint8_t pos=0;
static uint16_t last_timer = 0;
uint8_t i,j;
int8_t k;
int8_t increament = 1;
if (interval%2) increament = -1;
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval/2])) return;
last_timer = timer_read();
for (i=0;i<RGBLED_NUM;i++) {
led[i].r=0;
led[i].g=0;
led[i].b=0;
for (j=0;j<RGBLIGHT_EFFECT_SNAKE_LENGTH;j++) {
k = pos+j*increament;
if (k<0) k = k+RGBLED_NUM;
if (i==k) {
sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]);
}
}
}
rgblight_set();
if (increament == 1) {
if (pos - 1 < 0) {
pos = 13;
} else {
pos -= 1;
}
} else {
pos = (pos+1)%RGBLED_NUM;
}
}
void rgblight_effect_knight(uint8_t interval) {
static int8_t pos=0;
static uint16_t last_timer = 0;
uint8_t i,j,cur;
int8_t k;
struct cRGB preled[RGBLED_NUM];
static int8_t increament = -1;
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) return;
last_timer = timer_read();
for (i=0;i<RGBLED_NUM;i++) {
preled[i].r=0;
preled[i].g=0;
preled[i].b=0;
for (j=0;j<RGBLIGHT_EFFECT_KNIGHT_LENGTH;j++) {
k = pos+j*increament;
if (k<0) k = 0;
if (k>=RGBLED_NUM) k=RGBLED_NUM-1;
if (i==k) {
sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]);
}
}
}
if (RGBLIGHT_EFFECT_KNIGHT_OFFSET) {
for (i=0;i<RGBLED_NUM;i++) {
cur = (i+RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM;
led[i].r = preled[cur].r;
led[i].g = preled[cur].g;
led[i].b = preled[cur].b;
}
}
rgblight_set();
if (increament == 1) {
if (pos - 1 < 0 - RGBLIGHT_EFFECT_KNIGHT_LENGTH) {
pos = 0- RGBLIGHT_EFFECT_KNIGHT_LENGTH;
increament = -1;
} else {
pos -= 1;
}
} else {
if (pos+1>RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH) {
pos = RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH-1;
increament = 1;
} else {
pos += 1;
}
}
}

+ 87
- 0
keyboard/contra/rgblight.h View File

@@ -0,0 +1,87 @@
#ifndef RGBLIGHT_H
#define RGBLIGHT_H
#ifndef RGBLIGHT_MODES
#define RGBLIGHT_MODES 23
#endif
#ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 7
#endif
#ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 7
#endif
#ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 11
#endif
#ifndef RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH
#define RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH 4
#endif
#ifndef RGBLIGHT_HUE_STEP
#define RGBLIGHT_HUE_STEP 10
#endif
#ifndef RGBLIGHT_SAT_STEP
#define RGBLIGHT_SAT_STEP 17
#endif
#ifndef RGBLIGHT_VAL_STEP
#define RGBLIGHT_VAL_STEP 17
#endif
#define RGBLED_TIMER_TOP F_CPU/(256*64)
#include <stdint.h>
#include <stdbool.h>
#include "eeconfig.h"
#include "light_ws2812.h"
typedef union {
uint32_t raw;
struct {
bool enable :1;
uint8_t mode :6;
uint16_t hue :9;
uint8_t sat :8;
uint8_t val :8;
};
} rgblight_config_t;
void rgblight_init(void);
void rgblight_increase(void);
void rgblight_decrease(void);
void rgblight_toggle(void);
void rgblight_step(void);
void rgblight_mode(uint8_t mode);
void rgblight_set(void);
void rgblight_increase_hue(void);
void rgblight_decrease_hue(void);
void rgblight_increase_sat(void);
void rgblight_decrease_sat(void);
void rgblight_increase_val(void);
void rgblight_decrease_val(void);
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
#define EECONFIG_RGBLIGHT (uint8_t *)7
uint32_t eeconfig_read_rgblight(void);
void eeconfig_write_rgblight(uint32_t val);
void eeconfig_write_rgblight_default(void);
void eeconfig_debug_rgblight(void);
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1);
void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1);
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
void rgblight_timer_init(void);
void rgblight_timer_enable(void);
void rgblight_timer_disable(void);
void rgblight_timer_toggle(void);
void rgblight_effect_breathing(uint8_t interval);
void rgblight_effect_rainbow_mood(uint8_t interval);
void rgblight_effect_rainbow_swirl(uint8_t interval);
void rgblight_effect_snake(uint8_t interval);
void rgblight_effect_knight(uint8_t interval);
#endif

Loading…
Cancel
Save