Add support for HHKB JP

keyboard/hhkb_rn42/MEMO.txt

@@ -12,6 +12,7 @@ Improving:
 - Battry voltage display by command; like full(solid), medium(blink), low(flash)
 - move rn42 to protocol directory when it becomes reusable stack
 - LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
+- keyboard LED update
 
 Testing:
 - Factroy reset doesn't work; need to **test again** 10K pull-up is too high?

keyboard/hhkb_rn42/Makefile

@@ -53,12 +53,6 @@ SRC +=	keymap_common.c \
 	matrix.c \
 	led.c
 
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_hasu.c $(SRC)
-endif
-
 CONFIG_H = config.h
 
 
@@ -124,6 +118,26 @@ CONSOLE_ENABLE = yes		# Console for debug
 COMMAND_ENABLE = yes    	# Commands for debug and configuration
 #NKRO_ENABLE = yes		# USB Nkey Rollover
 #KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
+#HHKB_JP = yes			# HHKB JP support
+
+
+ifdef HHKB_JP
+    OPT_DEFS += -DHHKB_JP
+endif
+
+
+#
+# Keymap file
+#
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    ifdef HHKB_JP
+    	SRC := keymap_jp.c $(SRC)
+    else
+	SRC := keymap_hasu.c $(SRC)
+    endif
+endif
 
 
 # Search Path

keyboard/hhkb_rn42/config.h

@@ -28,7 +28,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 /* matrix size */
-#define MATRIX_ROWS 8
+#ifdef HHKB_JP
+#   define MATRIX_ROWS 16
+#else
+#   define MATRIX_ROWS 8
+#endif
 #define MATRIX_COLS 8
 
 

keyboard/hhkb_rn42/keymap_common.h

@@ -54,4 +54,31 @@ extern const uint16_t fn_actions[];
     { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO    } \
 }
 
+
+#define KEYMAP_JP( \
+    K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \
+    K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \
+    K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \
+    K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \
+    K04, K34, K64, K24, K14,      K74,      K94, K84, KB4, KE4, KF4, KD4, KC4 \
+) \
+{ \
+    { KC_NO,    KC_NO,    KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K32, KC_NO,    KC_##K34, KC_NO,    KC_NO,    KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K52, KC_##K53, KC_NO,    KC_##K55, KC_##K56, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##KA2, KC_##KA3, KC_NO,    KC_##KA5, KC_##KA6, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##KC2, KC_NO,    KC_##KC4, KC_##KC5, KC_##KC6, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO    }  \
+}
+
 #endif

keyboard/hhkb_rn42/matrix.c

@@ -20,20 +20,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <stdint.h>
 #include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
 #include <util/delay.h>
 #include "print.h"
 #include "debug.h"
 #include "util.h"
 #include "timer.h"
 #include "matrix.h"
-
+#include "hhkb_avr.h"
-
-// Timer resolution check
-#if (1000000/TIMER_RAW_FREQ > 20)
-#   error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
-#endif
 
 
 // matrix state buffer(1:on, 0:off)
@@ -43,122 +36,6 @@ static matrix_row_t _matrix0[MATRIX_ROWS];
 static matrix_row_t _matrix1[MATRIX_ROWS];
 
 
-// Matrix I/O ports
-//
-// row:     HC4051[A,B,C]  selects scan row0-7
-// col:     LS145[A,B,C,D] selects scan col0-7 and enable(D)
-// key:     on: 0/off: 1
-// prev:    unknown: output previous key state(negated)?
-
-#if defined(__AVR_AT90USB1286__)
-// Ports for Teensy++
-// row:     PB0-2
-// col:     PB3-5,6
-// key:     PE6(pull-uped)
-// prev:    PE7
-#define KEY_INIT()              do {    \
-    DDRB |= 0x7F;                       \
-    DDRE |=  (1<<7);                    \
-    DDRE &= ~(1<<6);                    \
-    PORTE |= (1<<6);                    \
-} while (0)
-#define KEY_SELECT(ROW, COL)    (PORTB = (PORTB & 0xC0) |       \
-                                         (((COL) & 0x07)<<3) |  \
-                                         ((ROW) & 0x07))
-#define KEY_ENABLE()            (PORTB &= ~(1<<6))
-#define KEY_UNABLE()            (PORTB |=  (1<<6))
-#define KEY_STATE()             (PINE & (1<<6))
-#define KEY_PREV_ON()           (PORTE |=  (1<<7))
-#define KEY_PREV_OFF()          (PORTE &= ~(1<<7))
-#define KEY_POWER_ON()
-#define KEY_POWER_OFF()
-
-#elif defined(__AVR_ATmega32U4__)
-// Ports for my designed Alt Controller PCB
-// row:     PB0-2
-// col:     PB3-5,6
-// key:     PD7(pull-uped)
-// prev:    PB7
-// power:   PD4(L:off/H:on)
-#define KEY_INIT()              do {    \
-    DDRB  = 0xFF;                       \
-    PORTB = 0x00;                       \
-    DDRD  &= ~0x80;                     \
-    PORTD |= 0x80;                      \
-    /* keyswitch board power on */      \
-    DDRD  |=  (1<<4);                   \
-    PORTD |=  (1<<4);                   \
-    KEY_UNABLE();                       \
-    KEY_PREV_OFF();                     \
-} while (0)
-#define KEY_SELECT(ROW, COL)    (PORTB = (PORTB & 0xC0) |       \
-                                         (((COL) & 0x07)<<3) |  \
-                                         ((ROW) & 0x07))
-#define KEY_ENABLE()            (PORTB &= ~(1<<6))
-#define KEY_UNABLE()            (PORTB |=  (1<<6))
-#define KEY_STATE()             (PIND & (1<<7))
-#define KEY_PREV_ON()           (PORTB |=  (1<<7))
-#define KEY_PREV_OFF()          (PORTB &= ~(1<<7))
-#define KEY_POWER_ON()
-#define KEY_POWER_OFF()
-/*
-#define KEY_POWER_ON()          do {    \
-    KEY_INIT();                         \
-    PORTD |=  (1<<4);                   \
-    _delay_ms(1);                       \
-} while (0)
-#define KEY_POWER_OFF()         do {    \
-    PORTD &= ~(1<<4);                   \
-    DDRB  &= ~0xFF;                     \
-    PORTB &= ~0xFF;                     \
-    DDRB  &= ~0x80;                     \
-    PORTB &= ~0x80;                     \
-} while (0)
-*/
-
-
-#elif defined(__AVR_ATmega328P__)
-// Ports for V-USB
-// key:     PB0(pull-uped)
-// prev:    PB1
-// row:     PB2-4
-// col:     PC0-2,3
-// power:   PB5(Low:on/Hi-z:off)
-#define KEY_INIT()              do {    \
-    DDRB  |= 0x3E;                      \
-    DDRB  &= ~(1<<0);                   \
-    PORTB |= 1<<0;                      \
-    DDRC  |= 0x0F;                      \
-    KEY_UNABLE();                       \
-    KEY_PREV_OFF();                     \
-} while (0)
-#define KEY_SELECT(ROW, COL)    do {    \
-    PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
-    PORTC = (PORTC & 0xF8) | ((COL) & 0x07);    \
-} while (0)
-#define KEY_ENABLE()            (PORTC &= ~(1<<3))
-#define KEY_UNABLE()            (PORTC |=  (1<<3))
-#define KEY_STATE()             (PINB & (1<<0))
-#define KEY_PREV_ON()           (PORTB |=  (1<<1))
-#define KEY_PREV_OFF()          (PORTB &= ~(1<<1))
-// Power supply switching
-#define KEY_POWER_ON()          do {    \
-    KEY_INIT();                         \
-    PORTB &= ~(1<<5);                   \
-    _delay_ms(1);                       \
-} while (0)
-#define KEY_POWER_OFF()         do {    \
-    DDRB  &= ~0x3F;                     \
-    PORTB &= ~0x3F;                     \
-    DDRC  &= ~0x0F;                     \
-    PORTC &= ~0x0F;                     \
-} while (0)
-
-#else
-#   error "define code for matrix scan"
-#endif
-
-
 inline
 uint8_t matrix_rows(void)
 {
@@ -199,13 +76,13 @@ uint8_t matrix_scan(void)
     for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
         for (uint8_t col = 0; col < MATRIX_COLS; col++) {
             KEY_SELECT(row, col);
-            _delay_us(40);
+            _delay_us(5);
 
             // Not sure this is needed. This just emulates HHKB controller's behaviour.
             if (matrix_prev[row] & (1<<col)) {
                 KEY_PREV_ON();
             }
-            _delay_us(7);
+            _delay_us(10);
 
             // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
             // If V-USB interrupts in this section we could lose 40us or so
@@ -241,11 +118,13 @@ uint8_t matrix_scan(void)
                 matrix[row] = matrix_prev[row];
             }
 
+            _delay_us(5);
             KEY_PREV_OFF();
             KEY_UNABLE();
+
             // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
             // This takes 25us or more to make sure KEY_STATE returns to idle state.
-            _delay_us(150);
+            _delay_us(75);
         }
     }
     KEY_POWER_OFF();