Upload files to 'keyboard/aardvark'
This commit is contained in:
parent
1a16bb2555
commit
51a1e56e29
505
keyboard/aardvark/rgblight.c
Normal file
505
keyboard/aardvark/rgblight.c
Normal file
@ -0,0 +1,505 @@
|
||||
#include <avr/eeprom.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include "progmem.h"
|
||||
#include "timer.h"
|
||||
#include "rgblight.h"
|
||||
#include "debug.h"
|
||||
|
||||
const uint8_t DIM_CURVE[] PROGMEM = {
|
||||
0, 1, 1, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
|
||||
3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 6, 6,
|
||||
6, 6, 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, 8, 8, 8, 8,
|
||||
8, 8, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 11, 11, 11,
|
||||
11, 11, 12, 12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15,
|
||||
15, 15, 16, 16, 16, 16, 17, 17, 17, 18, 18, 18, 19, 19, 19, 20,
|
||||
20, 20, 21, 21, 22, 22, 22, 23, 23, 24, 24, 25, 25, 25, 26, 26,
|
||||
27, 27, 28, 28, 29, 29, 30, 30, 31, 32, 32, 33, 33, 34, 35, 35,
|
||||
36, 36, 37, 38, 38, 39, 40, 40, 41, 42, 43, 43, 44, 45, 46, 47,
|
||||
48, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62,
|
||||
63, 64, 65, 66, 68, 69, 70, 71, 73, 74, 75, 76, 78, 79, 81, 82,
|
||||
83, 85, 86, 88, 90, 91, 93, 94, 96, 98, 99, 101, 103, 105, 107, 109,
|
||||
110, 112, 114, 116, 118, 121, 123, 125, 127, 129, 132, 134, 136, 139, 141, 144,
|
||||
146, 149, 151, 154, 157, 159, 162, 165, 168, 171, 174, 177, 180, 183, 186, 190,
|
||||
193, 196, 200, 203, 207, 211, 214, 218, 222, 226, 230, 234, 238, 242, 248, 255,
|
||||
};
|
||||
const uint8_t RGBLED_BREATHING_TABLE[] PROGMEM = {0,0,0,0,1,1,1,2,2,3,4,5,5,6,7,9,10,11,12,14,15,17,18,20,21,23,25,27,29,31,33,35,37,40,42,44,47,49,52,54,57,59,62,65,67,70,73,76,79,82,85,88,90,93,97,100,103,106,109,112,115,118,121,124,127,131,134,137,140,143,146,149,152,155,158,162,165,167,170,173,176,179,182,185,188,190,193,196,198,201,203,206,208,211,213,215,218,220,222,224,226,228,230,232,234,235,237,238,240,241,243,244,245,246,248,249,250,250,251,252,253,253,254,254,254,255,255,255,255,255,255,255,254,254,254,253,253,252,251,250,250,249,248,246,245,244,243,241,240,238,237,235,234,232,230,228,226,224,222,220,218,215,213,211,208,206,203,201,198,196,193,190,188,185,182,179,176,173,170,167,165,162,158,155,152,149,146,143,140,137,134,131,128,124,121,118,115,112,109,106,103,100,97,93,90,88,85,82,79,76,73,70,67,65,62,59,57,54,52,49,47,44,42,40,37,35,33,31,29,27,25,23,21,20,18,17,15,14,12,11,10,9,7,6,5,5,4,3,2,2,1,1,1,0,0,0};
|
||||
const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
|
||||
const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
|
||||
const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
|
||||
const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
|
||||
const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20};
|
||||
|
||||
rgblight_config_t rgblight_config;
|
||||
rgblight_config_t inmem_config;
|
||||
struct cRGB led[RGBLED_NUM];
|
||||
uint8_t rgblight_inited = 0;
|
||||
|
||||
|
||||
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) {
|
||||
/* convert hue, saturation and brightness ( HSB/HSV ) to RGB
|
||||
The DIM_CURVE is used only on brightness/value and on saturation (inverted).
|
||||
This looks the most natural.
|
||||
*/
|
||||
uint8_t r, g, b;
|
||||
|
||||
val = pgm_read_byte(&DIM_CURVE[val]);
|
||||
sat = 255 - pgm_read_byte(&DIM_CURVE[255 - sat]);
|
||||
|
||||
uint8_t base;
|
||||
|
||||
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
|
||||
r = val;
|
||||
g = val;
|
||||
b = val;
|
||||
} else {
|
||||
base = ((255 - sat) * val) >> 8;
|
||||
|
||||
switch (hue / 60) {
|
||||
case 0:
|
||||
r = val;
|
||||
g = (((val - base)*hue) / 60) + base;
|
||||
b = base;
|
||||
break;
|
||||
|
||||
case 1:
|
||||
r = (((val - base)*(60 - (hue % 60))) / 60) + base;
|
||||
g = val;
|
||||
b = base;
|
||||
break;
|
||||
|
||||
case 2:
|
||||
r = base;
|
||||
g = val;
|
||||
b = (((val - base)*(hue % 60)) / 60) + base;
|
||||
break;
|
||||
|
||||
case 3:
|
||||
r = base;
|
||||
g = (((val - base)*(60 - (hue % 60))) / 60) + base;
|
||||
b = val;
|
||||
break;
|
||||
|
||||
case 4:
|
||||
r = (((val - base)*(hue % 60)) / 60) + base;
|
||||
g = base;
|
||||
b = val;
|
||||
break;
|
||||
|
||||
case 5:
|
||||
r = val;
|
||||
g = base;
|
||||
b = (((val - base)*(60 - (hue % 60))) / 60) + base;
|
||||
break;
|
||||
}
|
||||
}
|
||||
setrgb(r,g,b, led1);
|
||||
}
|
||||
|
||||
void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) {
|
||||
(*led1).r = r;
|
||||
(*led1).g = g;
|
||||
(*led1).b = b;
|
||||
}
|
||||
|
||||
|
||||
uint32_t eeconfig_read_rgblight(void) {
|
||||
return eeprom_read_dword(EECONFIG_RGBLIGHT);
|
||||
}
|
||||
void eeconfig_write_rgblight(uint32_t val) {
|
||||
eeprom_write_dword(EECONFIG_RGBLIGHT, val);
|
||||
}
|
||||
void eeconfig_write_rgblight_default(void) {
|
||||
dprintf("eeconfig_write_rgblight_default\n");
|
||||
rgblight_config.enable = 1;
|
||||
rgblight_config.mode = 1;
|
||||
rgblight_config.hue = 200;
|
||||
rgblight_config.sat = 204;
|
||||
rgblight_config.val = 204;
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
}
|
||||
void eeconfig_debug_rgblight(void) {
|
||||
dprintf("rgblight_config eprom\n");
|
||||
dprintf("rgblight_config.enable = %d\n", rgblight_config.enable);
|
||||
dprintf("rghlight_config.mode = %d\n", rgblight_config.mode);
|
||||
dprintf("rgblight_config.hue = %d\n", rgblight_config.hue);
|
||||
dprintf("rgblight_config.sat = %d\n", rgblight_config.sat);
|
||||
dprintf("rgblight_config.val = %d\n", rgblight_config.val);
|
||||
}
|
||||
|
||||
void rgblight_init(void) {
|
||||
debug_enable = 1; // Debug ON!
|
||||
dprintf("rgblight_init called.\n");
|
||||
rgblight_inited = 1;
|
||||
dprintf("rgblight_init start!\n");
|
||||
if (!eeconfig_is_enabled()) {
|
||||
dprintf("rgblight_init eeconfig is not enabled.\n");
|
||||
eeconfig_init();
|
||||
eeconfig_write_rgblight_default();
|
||||
}
|
||||
rgblight_config.raw = eeconfig_read_rgblight();
|
||||
if (!rgblight_config.mode) {
|
||||
dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n");
|
||||
eeconfig_write_rgblight_default();
|
||||
rgblight_config.raw = eeconfig_read_rgblight();
|
||||
}
|
||||
eeconfig_debug_rgblight(); // display current eeprom values
|
||||
|
||||
rgblight_timer_init(); // setup the timer
|
||||
|
||||
if (rgblight_config.enable) {
|
||||
rgblight_mode(rgblight_config.mode);
|
||||
}
|
||||
}
|
||||
|
||||
void rgblight_increase(void) {
|
||||
uint8_t mode;
|
||||
if (rgblight_config.mode < RGBLIGHT_MODES) {
|
||||
mode = rgblight_config.mode + 1;
|
||||
}
|
||||
rgblight_mode(mode);
|
||||
}
|
||||
|
||||
void rgblight_decrease(void) {
|
||||
uint8_t mode;
|
||||
if (rgblight_config.mode > 1) { //mode will never < 1, if mode is less than 1, eeprom need to be initialized.
|
||||
mode = rgblight_config.mode-1;
|
||||
}
|
||||
rgblight_mode(mode);
|
||||
}
|
||||
|
||||
void rgblight_step(void) {
|
||||
uint8_t mode;
|
||||
mode = rgblight_config.mode + 1;
|
||||
if (mode > RGBLIGHT_MODES) {
|
||||
mode = 1;
|
||||
}
|
||||
rgblight_mode(mode);
|
||||
}
|
||||
|
||||
void rgblight_mode(uint8_t mode) {
|
||||
if (!rgblight_config.enable) {
|
||||
return;
|
||||
}
|
||||
if (mode<1) {
|
||||
rgblight_config.mode = 1;
|
||||
} else if (mode > RGBLIGHT_MODES) {
|
||||
rgblight_config.mode = RGBLIGHT_MODES;
|
||||
} else {
|
||||
rgblight_config.mode = mode;
|
||||
}
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
dprintf("rgblight mode: %u\n", rgblight_config.mode);
|
||||
if (rgblight_config.mode == 1) {
|
||||
rgblight_timer_disable();
|
||||
} else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) {
|
||||
// MODE 2-5, breathing
|
||||
// MODE 6-8, rainbow mood
|
||||
// MODE 9-14, rainbow swirl
|
||||
// MODE 15-20, snake
|
||||
// MODE 21-23, knight
|
||||
rgblight_timer_enable();
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
|
||||
void rgblight_toggle(void) {
|
||||
rgblight_config.enable ^= 1;
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
dprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable);
|
||||
if (rgblight_config.enable) {
|
||||
rgblight_mode(rgblight_config.mode);
|
||||
} else {
|
||||
rgblight_timer_disable();
|
||||
_delay_ms(50);
|
||||
rgblight_set();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
void rgblight_increase_hue(void){
|
||||
uint16_t hue;
|
||||
hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360;
|
||||
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_decrease_hue(void){
|
||||
uint16_t hue;
|
||||
if (rgblight_config.hue-RGBLIGHT_HUE_STEP <0 ) {
|
||||
hue = (rgblight_config.hue+360-RGBLIGHT_HUE_STEP) % 360;
|
||||
} else {
|
||||
hue = (rgblight_config.hue-RGBLIGHT_HUE_STEP) % 360;
|
||||
}
|
||||
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_increase_sat(void) {
|
||||
uint8_t sat;
|
||||
if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) {
|
||||
sat = 255;
|
||||
} else {
|
||||
sat = rgblight_config.sat+RGBLIGHT_SAT_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_decrease_sat(void){
|
||||
uint8_t sat;
|
||||
if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) {
|
||||
sat = 0;
|
||||
} else {
|
||||
sat = rgblight_config.sat-RGBLIGHT_SAT_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val);
|
||||
}
|
||||
void rgblight_increase_val(void){
|
||||
uint8_t val;
|
||||
if (rgblight_config.val + RGBLIGHT_VAL_STEP > 255) {
|
||||
val = 255;
|
||||
} else {
|
||||
val = rgblight_config.val+RGBLIGHT_VAL_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
|
||||
}
|
||||
void rgblight_decrease_val(void) {
|
||||
uint8_t val;
|
||||
if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) {
|
||||
val = 0;
|
||||
} else {
|
||||
val = rgblight_config.val-RGBLIGHT_VAL_STEP;
|
||||
}
|
||||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
|
||||
}
|
||||
|
||||
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val){
|
||||
inmem_config.raw = rgblight_config.raw;
|
||||
if (rgblight_config.enable) {
|
||||
struct cRGB tmp_led;
|
||||
sethsv(hue, sat, val, &tmp_led);
|
||||
inmem_config.hue = hue;
|
||||
inmem_config.sat = sat;
|
||||
inmem_config.val = val;
|
||||
// dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val);
|
||||
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
|
||||
}
|
||||
}
|
||||
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val){
|
||||
if (rgblight_config.enable) {
|
||||
if (rgblight_config.mode == 1) {
|
||||
// same static color
|
||||
rgblight_sethsv_noeeprom(hue, sat, val);
|
||||
} else {
|
||||
// all LEDs in same color
|
||||
if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
|
||||
// breathing mode, ignore the change of val, use in memory value instead
|
||||
val = rgblight_config.val;
|
||||
} else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) {
|
||||
// rainbow mood and rainbow swirl, ignore the change of hue
|
||||
hue = rgblight_config.hue;
|
||||
}
|
||||
}
|
||||
rgblight_config.hue = hue;
|
||||
rgblight_config.sat = sat;
|
||||
rgblight_config.val = val;
|
||||
eeconfig_write_rgblight(rgblight_config.raw);
|
||||
dprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
|
||||
}
|
||||
}
|
||||
|
||||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b){
|
||||
// dprintf("rgblight set rgb: %u,%u,%u\n", r,g,b);
|
||||
for (uint8_t i=0;i<RGBLED_NUM;i++) {
|
||||
led[i].r = r;
|
||||
led[i].g = g;
|
||||
led[i].b = b;
|
||||
}
|
||||
rgblight_set();
|
||||
|
||||
}
|
||||
|
||||
void rgblight_set(void) {
|
||||
if (rgblight_config.enable) {
|
||||
ws2812_setleds(led, RGBLED_NUM);
|
||||
} else {
|
||||
for (uint8_t i=0;i<RGBLED_NUM;i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
}
|
||||
ws2812_setleds(led, RGBLED_NUM);
|
||||
}
|
||||
}
|
||||
|
||||
// Animation timer -- AVR Timer1
|
||||
void rgblight_timer_init(void) {
|
||||
static uint8_t rgblight_timer_is_init = 0;
|
||||
if (rgblight_timer_is_init) {
|
||||
return;
|
||||
}
|
||||
rgblight_timer_is_init = 1;
|
||||
/* Timer 1 setup */
|
||||
TCCR1B = _BV(WGM12) //CTC mode OCR1A as TOP
|
||||
| _BV(CS12); //Clock selelct: clk/1
|
||||
/* Set TOP value */
|
||||
uint8_t sreg = SREG;
|
||||
cli();
|
||||
OCR1AH = (RGBLED_TIMER_TOP>>8)&0xff;
|
||||
OCR1AL = RGBLED_TIMER_TOP&0xff;
|
||||
SREG = sreg;
|
||||
}
|
||||
void rgblight_timer_enable(void) {
|
||||
TIMSK1 |= _BV(OCIE1A);
|
||||
dprintf("TIMER1 enabled.\n");
|
||||
}
|
||||
void rgblight_timer_disable(void) {
|
||||
TIMSK1 &= ~_BV(OCIE1A);
|
||||
dprintf("TIMER1 disabled.\n");
|
||||
}
|
||||
void rgblight_timer_toggle(void) {
|
||||
TIMSK1 ^= _BV(OCIE1A);
|
||||
dprintf("TIMER1 toggled.\n");
|
||||
}
|
||||
|
||||
ISR(TIMER1_COMPA_vect) {
|
||||
// Mode = 1, static light, do nothing here
|
||||
if (rgblight_config.mode>=2 && rgblight_config.mode<=5) {
|
||||
// mode = 2 to 5, breathing mode
|
||||
rgblight_effect_breathing(rgblight_config.mode-2);
|
||||
|
||||
} else if (rgblight_config.mode>=6 && rgblight_config.mode<=8) {
|
||||
rgblight_effect_rainbow_mood(rgblight_config.mode-6);
|
||||
} else if (rgblight_config.mode>=9 && rgblight_config.mode<=14) {
|
||||
rgblight_effect_rainbow_swirl(rgblight_config.mode-9);
|
||||
} else if (rgblight_config.mode>=15 && rgblight_config.mode<=20) {
|
||||
rgblight_effect_snake(rgblight_config.mode-15);
|
||||
} else if (rgblight_config.mode>=21 && rgblight_config.mode<=23) {
|
||||
rgblight_effect_knight(rgblight_config.mode-21);
|
||||
}
|
||||
}
|
||||
|
||||
// effects
|
||||
void rgblight_effect_breathing(uint8_t interval) {
|
||||
static uint8_t pos = 0;
|
||||
static uint16_t last_timer = 0;
|
||||
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) return;
|
||||
last_timer = timer_read();
|
||||
|
||||
rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, pgm_read_byte(&RGBLED_BREATHING_TABLE[pos]));
|
||||
pos = (pos+1) % 256;
|
||||
}
|
||||
|
||||
void rgblight_effect_rainbow_mood(uint8_t interval) {
|
||||
static uint16_t current_hue=0;
|
||||
static uint16_t last_timer = 0;
|
||||
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) return;
|
||||
last_timer = timer_read();
|
||||
rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val);
|
||||
current_hue = (current_hue+1) % 360;
|
||||
}
|
||||
|
||||
void rgblight_effect_rainbow_swirl(uint8_t interval) {
|
||||
static uint16_t current_hue=0;
|
||||
static uint16_t last_timer = 0;
|
||||
uint16_t hue;
|
||||
uint8_t i;
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval/2])) return;
|
||||
last_timer = timer_read();
|
||||
for (i=0; i<RGBLED_NUM; i++) {
|
||||
hue = (360/RGBLED_NUM*i+current_hue)%360;
|
||||
sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]);
|
||||
}
|
||||
rgblight_set();
|
||||
|
||||
if (interval % 2) {
|
||||
current_hue = (current_hue+1) % 360;
|
||||
} else {
|
||||
if (current_hue -1 < 0) {
|
||||
current_hue = 359;
|
||||
} else {
|
||||
current_hue = current_hue - 1;
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
void rgblight_effect_snake(uint8_t interval) {
|
||||
static uint8_t pos=0;
|
||||
static uint16_t last_timer = 0;
|
||||
uint8_t i,j;
|
||||
int8_t k;
|
||||
int8_t increament = 1;
|
||||
if (interval%2) increament = -1;
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval/2])) return;
|
||||
last_timer = timer_read();
|
||||
for (i=0;i<RGBLED_NUM;i++) {
|
||||
led[i].r=0;
|
||||
led[i].g=0;
|
||||
led[i].b=0;
|
||||
for (j=0;j<RGBLIGHT_EFFECT_SNAKE_LENGTH;j++) {
|
||||
k = pos+j*increament;
|
||||
if (k<0) k = k+RGBLED_NUM;
|
||||
if (i==k) {
|
||||
sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
rgblight_set();
|
||||
if (increament == 1) {
|
||||
if (pos - 1 < 0) {
|
||||
pos = 13;
|
||||
} else {
|
||||
pos -= 1;
|
||||
}
|
||||
} else {
|
||||
pos = (pos+1)%RGBLED_NUM;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void rgblight_effect_knight(uint8_t interval) {
|
||||
static int8_t pos=0;
|
||||
static uint16_t last_timer = 0;
|
||||
uint8_t i,j,cur;
|
||||
int8_t k;
|
||||
struct cRGB preled[RGBLED_NUM];
|
||||
static int8_t increament = -1;
|
||||
if (timer_elapsed(last_timer)<pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) return;
|
||||
last_timer = timer_read();
|
||||
for (i=0;i<RGBLED_NUM;i++) {
|
||||
preled[i].r=0;
|
||||
preled[i].g=0;
|
||||
preled[i].b=0;
|
||||
for (j=0;j<RGBLIGHT_EFFECT_KNIGHT_LENGTH;j++) {
|
||||
k = pos+j*increament;
|
||||
if (k<0) k = 0;
|
||||
if (k>=RGBLED_NUM) k=RGBLED_NUM-1;
|
||||
if (i==k) {
|
||||
sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
if (RGBLIGHT_EFFECT_KNIGHT_OFFSET) {
|
||||
for (i=0;i<RGBLED_NUM;i++) {
|
||||
cur = (i+RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM;
|
||||
led[i].r = preled[cur].r;
|
||||
led[i].g = preled[cur].g;
|
||||
led[i].b = preled[cur].b;
|
||||
}
|
||||
}
|
||||
rgblight_set();
|
||||
if (increament == 1) {
|
||||
if (pos - 1 < 0 - RGBLIGHT_EFFECT_KNIGHT_LENGTH) {
|
||||
pos = 0- RGBLIGHT_EFFECT_KNIGHT_LENGTH;
|
||||
increament = -1;
|
||||
} else {
|
||||
pos -= 1;
|
||||
}
|
||||
} else {
|
||||
if (pos+1>RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH) {
|
||||
pos = RGBLED_NUM+RGBLIGHT_EFFECT_KNIGHT_LENGTH-1;
|
||||
increament = 1;
|
||||
} else {
|
||||
pos += 1;
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
87
keyboard/aardvark/rgblight.h
Normal file
87
keyboard/aardvark/rgblight.h
Normal file
@ -0,0 +1,87 @@
|
||||
#ifndef RGBLIGHT_H
|
||||
#define RGBLIGHT_H
|
||||
|
||||
#ifndef RGBLIGHT_MODES
|
||||
#define RGBLIGHT_MODES 23
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH
|
||||
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 7
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 7
|
||||
#endif
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 11
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH
|
||||
#define RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH 4
|
||||
#endif
|
||||
|
||||
#ifndef RGBLIGHT_HUE_STEP
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#endif
|
||||
#ifndef RGBLIGHT_SAT_STEP
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#endif
|
||||
#ifndef RGBLIGHT_VAL_STEP
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
#endif
|
||||
|
||||
#define RGBLED_TIMER_TOP F_CPU/(256*64)
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
#include "light_ws2812.h"
|
||||
|
||||
typedef union {
|
||||
uint32_t raw;
|
||||
struct {
|
||||
bool enable :1;
|
||||
uint8_t mode :6;
|
||||
uint16_t hue :9;
|
||||
uint8_t sat :8;
|
||||
uint8_t val :8;
|
||||
};
|
||||
} rgblight_config_t;
|
||||
|
||||
void rgblight_init(void);
|
||||
void rgblight_increase(void);
|
||||
void rgblight_decrease(void);
|
||||
void rgblight_toggle(void);
|
||||
void rgblight_step(void);
|
||||
void rgblight_mode(uint8_t mode);
|
||||
void rgblight_set(void);
|
||||
void rgblight_increase_hue(void);
|
||||
void rgblight_decrease_hue(void);
|
||||
void rgblight_increase_sat(void);
|
||||
void rgblight_decrease_sat(void);
|
||||
void rgblight_increase_val(void);
|
||||
void rgblight_decrease_val(void);
|
||||
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
|
||||
|
||||
#define EECONFIG_RGBLIGHT (uint8_t *)7
|
||||
uint32_t eeconfig_read_rgblight(void);
|
||||
void eeconfig_write_rgblight(uint32_t val);
|
||||
void eeconfig_write_rgblight_default(void);
|
||||
void eeconfig_debug_rgblight(void);
|
||||
|
||||
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1);
|
||||
void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1);
|
||||
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
|
||||
void rgblight_timer_init(void);
|
||||
void rgblight_timer_enable(void);
|
||||
void rgblight_timer_disable(void);
|
||||
void rgblight_timer_toggle(void);
|
||||
void rgblight_effect_breathing(uint8_t interval);
|
||||
void rgblight_effect_rainbow_mood(uint8_t interval);
|
||||
void rgblight_effect_rainbow_swirl(uint8_t interval);
|
||||
void rgblight_effect_snake(uint8_t interval);
|
||||
void rgblight_effect_knight(uint8_t interval);
|
||||
|
||||
#endif
|
||||
378
keyboard/aardvark/usbconfig.h
Normal file
378
keyboard/aardvark/usbconfig.h
Normal file
@ -0,0 +1,378 @@
|
||||
/* Name: usbconfig.h
|
||||
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
||||
* Author: Christian Starkjohann
|
||||
* Creation Date: 2005-04-01
|
||||
* Tabsize: 4
|
||||
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
|
||||
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
||||
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
|
||||
*/
|
||||
|
||||
#ifndef __usbconfig_h_included__
|
||||
#define __usbconfig_h_included__
|
||||
|
||||
|
||||
/*
|
||||
General Description:
|
||||
This file is an example configuration (with inline documentation) for the USB
|
||||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
|
||||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
|
||||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
|
||||
other hardware interrupt, as long as it is the highest level interrupt, see
|
||||
section at the end of this file).
|
||||
*/
|
||||
|
||||
/* ---------------------------- Hardware Config ---------------------------- */
|
||||
|
||||
#define USB_CFG_IOPORTNAME D
|
||||
/* This is the port where the USB bus is connected. When you configure it to
|
||||
* "B", the registers PORTB, PINB and DDRB will be used.
|
||||
*/
|
||||
#define USB_CFG_DMINUS_BIT 4
|
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||
* This may be any bit in the port.
|
||||
*/
|
||||
#define USB_CFG_DPLUS_BIT 2
|
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||
* This may be any bit in the port. Please note that D+ must also be connected
|
||||
* to interrupt pin INT0! [You can also use other interrupts, see section
|
||||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as
|
||||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the
|
||||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
|
||||
* markers every millisecond.]
|
||||
*/
|
||||
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
|
||||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
|
||||
* require no crystal, they tolerate +/- 1% deviation from the nominal
|
||||
* frequency. All other rates require a precision of 2000 ppm and thus a
|
||||
* crystal!
|
||||
* Since F_CPU should be defined to your actual clock rate anyway, you should
|
||||
* not need to modify this setting.
|
||||
*/
|
||||
#define USB_CFG_CHECK_CRC 0
|
||||
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
|
||||
* currently only available for 18 MHz crystal clock. You must choose
|
||||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
|
||||
*/
|
||||
|
||||
/* ----------------------- Optional Hardware Config ------------------------ */
|
||||
|
||||
/* #define USB_CFG_PULLUP_IOPORTNAME D */
|
||||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||
* V+, you can connect and disconnect the device from firmware by calling
|
||||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
|
||||
* This constant defines the port on which the pullup resistor is connected.
|
||||
*/
|
||||
/* #define USB_CFG_PULLUP_BIT 4 */
|
||||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||
* above) where the 1.5k pullup resistor is connected. See description
|
||||
* above for details.
|
||||
*/
|
||||
|
||||
/* --------------------------- Functional Range ---------------------------- */
|
||||
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
|
||||
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
|
||||
* number).
|
||||
*/
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
|
||||
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
|
||||
* configured below) and a catch-all default interrupt-in endpoint as above.
|
||||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
|
||||
*/
|
||||
#define USB_CFG_EP3_NUMBER 3
|
||||
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||
* endpoint number (except 0) with this macro. Default if undefined is 3.
|
||||
*/
|
||||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
|
||||
/* The above macro defines the startup condition for data toggling on the
|
||||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
|
||||
* Since the token is toggled BEFORE sending any data, the first packet is
|
||||
* sent with the oposite value of this configuration!
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_HALT 0
|
||||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
|
||||
* it is required by the standard. We have made it a config option because it
|
||||
* bloats the code considerably.
|
||||
*/
|
||||
#define USB_CFG_SUPPRESS_INTR_CODE 0
|
||||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||
* want to send any data over them. If this macro is defined to 1, functions
|
||||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
|
||||
* you need the interrupt-in endpoints in order to comply to an interface
|
||||
* (e.g. HID), but never want to send any data. This option saves a couple
|
||||
* of bytes in flash memory and the transmit buffers in RAM.
|
||||
*/
|
||||
#define USB_CFG_INTR_POLL_INTERVAL 10
|
||||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
|
||||
* interval. The value is in milliseconds and must not be less than 10 ms for
|
||||
* low speed devices.
|
||||
*/
|
||||
#define USB_CFG_IS_SELF_POWERED 0
|
||||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||
* device is powered from the USB bus.
|
||||
*/
|
||||
#define USB_CFG_MAX_BUS_POWER 500
|
||||
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||
* The value is in milliamperes. [It will be divided by two since USB
|
||||
* communicates power requirements in units of 2 mA.]
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_WRITE 1
|
||||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||
* transfers. Set it to 0 if you don't need it and want to save a couple of
|
||||
* bytes.
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_READ 0
|
||||
/* Set this to 1 if you need to send control replies which are generated
|
||||
* "on the fly" when usbFunctionRead() is called. If you only want to send
|
||||
* data from a static buffer, set it to 0 and return the data from
|
||||
* usbFunctionSetup(). This saves a couple of bytes.
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
|
||||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||
* You must implement the function usbFunctionWriteOut() which receives all
|
||||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
|
||||
* can be found in 'usbRxToken'.
|
||||
*/
|
||||
#define USB_CFG_HAVE_FLOWCONTROL 0
|
||||
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
|
||||
* usbdrv.h.
|
||||
*/
|
||||
#define USB_CFG_DRIVER_FLASH_PAGE 0
|
||||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||
* where the driver's constants (descriptors) are located. Or in other words:
|
||||
* Define this to 1 for boot loaders on the ATMega128.
|
||||
*/
|
||||
#define USB_CFG_LONG_TRANSFERS 0
|
||||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||
* in a single control-in or control-out transfer. Note that the capability
|
||||
* for long transfers increases the driver size.
|
||||
*/
|
||||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
|
||||
/* This macro is a hook if you want to do unconventional things. If it is
|
||||
* defined, it's inserted at the beginning of received message processing.
|
||||
* If you eat the received message and don't want default processing to
|
||||
* proceed, do a return after doing your things. One possible application
|
||||
* (besides debugging) is to flash a status LED on each packet.
|
||||
*/
|
||||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
|
||||
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||
* one parameter which distinguishes between the start of RESET state and its
|
||||
* end.
|
||||
*/
|
||||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
|
||||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||
* received.
|
||||
*/
|
||||
#define USB_COUNT_SOF 0
|
||||
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||
* counts SOF packets. This feature requires that the hardware interrupt is
|
||||
* connected to D- instead of D+.
|
||||
*/
|
||||
/* #ifdef __ASSEMBLER__
|
||||
* macro myAssemblerMacro
|
||||
* in YL, TCNT0
|
||||
* sts timer0Snapshot, YL
|
||||
* endm
|
||||
* #endif
|
||||
* #define USB_SOF_HOOK myAssemblerMacro
|
||||
* This macro (if defined) is executed in the assembler module when a
|
||||
* Start Of Frame condition is detected. It is recommended to define it to
|
||||
* the name of an assembler macro which is defined here as well so that more
|
||||
* than one assembler instruction can be used. The macro may use the register
|
||||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
|
||||
* immediately after an SOF pulse may be lost and must be retried by the host.
|
||||
* What can you do with this hook? Since the SOF signal occurs exactly every
|
||||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
|
||||
* designs running on the internal RC oscillator.
|
||||
* Please note that Start Of Frame detection works only if D- is wired to the
|
||||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
|
||||
*/
|
||||
#define USB_CFG_CHECK_DATA_TOGGLING 0
|
||||
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||
* sent by the host. Duplicates occur only as a consequence of communication
|
||||
* errors, when the host does not receive an ACK. Please note that you need to
|
||||
* implement the filtering yourself in usbFunctionWriteOut() and
|
||||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
|
||||
* for each control- and out-endpoint to check for duplicate packets.
|
||||
*/
|
||||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
|
||||
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
|
||||
*/
|
||||
#define USB_USE_FAST_CRC 0
|
||||
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||
* faster, the other is smaller. This CRC routine is only used for transmitted
|
||||
* messages where timing is not critical. The faster routine needs 31 cycles
|
||||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
|
||||
* may be worth the 32 bytes bigger code size if you transmit lots of data and
|
||||
* run the AVR close to its limit.
|
||||
*/
|
||||
|
||||
/* -------------------------- Device Description --------------------------- */
|
||||
|
||||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
|
||||
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
|
||||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
|
||||
* *** IMPORTANT NOTE ***
|
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||
* the implications!
|
||||
*/
|
||||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
|
||||
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||
* scope of the vendor ID. If you have registered your own VID with usb.org
|
||||
* or if you have licensed a PID from somebody else, define it here. Otherwise
|
||||
* you may use one of obdev's free shared VID/PID pairs. See the file
|
||||
* USB-IDs-for-free.txt for details!
|
||||
* *** IMPORTANT NOTE ***
|
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||
* the implications!
|
||||
*/
|
||||
#define USB_CFG_DEVICE_VERSION 0x00, 0x01
|
||||
/* Version number of the device: Minor number first, then major number.
|
||||
*/
|
||||
#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.'
|
||||
#define USB_CFG_VENDOR_NAME_LEN 6
|
||||
/* These two values define the vendor name returned by the USB device. The name
|
||||
* must be given as a list of characters under single quotes. The characters
|
||||
* are interpreted as Unicode (UTF-16) entities.
|
||||
* If you don't want a vendor name string, undefine these macros.
|
||||
* ALWAYS define a vendor name containing your Internet domain name if you use
|
||||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
|
||||
* details.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_NAME 'a', 'a', 'r', 'd', 'v', 'a', 'r', 'k', ' ', 'V', '-', 'U', 'S', 'B', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd'
|
||||
#define USB_CFG_DEVICE_NAME_LEN 23
|
||||
/* Same as above for the device name. If you don't want a device name, undefine
|
||||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
|
||||
* you use a shared VID/PID.
|
||||
*/
|
||||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
|
||||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
|
||||
/* Same as above for the serial number. If you don't want a serial number,
|
||||
* undefine the macros.
|
||||
* It may be useful to provide the serial number through other means than at
|
||||
* compile time. See the section about descriptor properties below for how
|
||||
* to fine tune control over USB descriptors such as the string descriptor
|
||||
* for the serial number.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_CLASS 0
|
||||
#define USB_CFG_DEVICE_SUBCLASS 0
|
||||
/* See USB specification if you want to conform to an existing device class.
|
||||
* Class 0xff is "vendor specific".
|
||||
*/
|
||||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */
|
||||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
|
||||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
|
||||
/* See USB specification if you want to conform to an existing device class or
|
||||
* protocol. The following classes must be set at interface level:
|
||||
* HID class is 3, no subclass and protocol required (but may be useful!)
|
||||
* CDC class is 2, use subclass 2 and protocol 1 for ACM
|
||||
*/
|
||||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
|
||||
/* Define this to the length of the HID report descriptor, if you implement
|
||||
* an HID device. Otherwise don't define it or define it to 0.
|
||||
* If you use this define, you must add a PROGMEM character array named
|
||||
* "usbHidReportDescriptor" to your code which contains the report descriptor.
|
||||
* Don't forget to keep the array and this define in sync!
|
||||
*/
|
||||
|
||||
/* #define USB_PUBLIC static */
|
||||
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||
* This technique saves a couple of bytes in flash memory.
|
||||
*/
|
||||
|
||||
/* ------------------- Fine Control over USB Descriptors ------------------- */
|
||||
/* If you don't want to use the driver's default USB descriptors, you can
|
||||
* provide our own. These can be provided as (1) fixed length static data in
|
||||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at
|
||||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
|
||||
* information about this function.
|
||||
* Descriptor handling is configured through the descriptor's properties. If
|
||||
* no properties are defined or if they are 0, the default descriptor is used.
|
||||
* Possible properties are:
|
||||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
|
||||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
|
||||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
|
||||
* you want RAM pointers.
|
||||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
|
||||
* in static memory is in RAM, not in flash memory.
|
||||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
|
||||
* the driver must know the descriptor's length. The descriptor itself is
|
||||
* found at the address of a well known identifier (see below).
|
||||
* List of static descriptor names (must be declared PROGMEM if in flash):
|
||||
* char usbDescriptorDevice[];
|
||||
* char usbDescriptorConfiguration[];
|
||||
* char usbDescriptorHidReport[];
|
||||
* char usbDescriptorString0[];
|
||||
* int usbDescriptorStringVendor[];
|
||||
* int usbDescriptorStringDevice[];
|
||||
* int usbDescriptorStringSerialNumber[];
|
||||
* Other descriptors can't be provided statically, they must be provided
|
||||
* dynamically at runtime.
|
||||
*
|
||||
* Descriptor properties are or-ed or added together, e.g.:
|
||||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
|
||||
*
|
||||
* The following descriptors are defined:
|
||||
* USB_CFG_DESCR_PROPS_DEVICE
|
||||
* USB_CFG_DESCR_PROPS_CONFIGURATION
|
||||
* USB_CFG_DESCR_PROPS_STRINGS
|
||||
* USB_CFG_DESCR_PROPS_STRING_0
|
||||
* USB_CFG_DESCR_PROPS_STRING_VENDOR
|
||||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT
|
||||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
|
||||
* USB_CFG_DESCR_PROPS_HID
|
||||
* USB_CFG_DESCR_PROPS_HID_REPORT
|
||||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
|
||||
*
|
||||
* Note about string descriptors: String descriptors are not just strings, they
|
||||
* are Unicode strings prefixed with a 2 byte header. Example:
|
||||
* int serialNumberDescriptor[] = {
|
||||
* USB_STRING_DESCRIPTOR_HEADER(6),
|
||||
* 'S', 'e', 'r', 'i', 'a', 'l'
|
||||
* };
|
||||
*/
|
||||
|
||||
#define USB_CFG_DESCR_PROPS_DEVICE 0
|
||||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
|
||||
#define USB_CFG_DESCR_PROPS_STRINGS 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_0 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
|
||||
//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
|
||||
#define USB_CFG_DESCR_PROPS_HID 0
|
||||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
|
||||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
|
||||
|
||||
/* ----------------------- Optional MCU Description ------------------------ */
|
||||
|
||||
/* The following configurations have working defaults in usbdrv.h. You
|
||||
* usually don't need to set them explicitly. Only if you want to run
|
||||
* the driver on a device which is not yet supported or with a compiler
|
||||
* which is not fully supported (such as IAR C) or if you use a differnt
|
||||
* interrupt than INT0, you may have to define some of these.
|
||||
*/
|
||||
/* #define USB_INTR_CFG MCUCR */
|
||||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
|
||||
/* #define USB_INTR_CFG_CLR 0 */
|
||||
/* #define USB_INTR_ENABLE GIMSK */
|
||||
/* #define USB_INTR_ENABLE_BIT INT0 */
|
||||
/* #define USB_INTR_PENDING GIFR */
|
||||
/* #define USB_INTR_PENDING_BIT INTF0 */
|
||||
/* #define USB_INTR_VECTOR INT0_vect */
|
||||
|
||||
#endif /* __usbconfig_h_included__ */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user