From 12f6e9ffa76f685f7256bf1421f918f90c93add1 Mon Sep 17 00:00:00 2001 From: tmk Date: Sat, 28 Apr 2012 01:57:36 +0900 Subject: [PATCH 1/6] Added M0110A support contributed by skagon@github. - README is written with markdown notation. - m0110.c can handles Arrow keys and Calc keys of M0110A. - EXTRAFLAGS and EXTRALDFLAGS are added in rules.mk to give flags on make command line. --- m0110.c | 81 ++++++++++++++++++++-- m0110.h | 38 ++++++++--- m0110_usb/README | 55 --------------- m0110_usb/README.md | 141 ++++++++++++++++++++++++++++++++++++++ m0110_usb/config.h | 5 +- m0110_usb/keymap.c | 160 +++++++++++++++++++++++++++++--------------- m0110_usb/matrix.c | 3 + rules.mk | 9 ++- 8 files changed, 359 insertions(+), 133 deletions(-) delete mode 100644 m0110_usb/README create mode 100644 m0110_usb/README.md diff --git a/m0110.c b/m0110.c index 522c3ec0..68ce2d1c 100644 --- a/m0110.c +++ b/m0110.c @@ -34,6 +34,7 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* M0110A Support was contributed by skagon@github */ #include #include @@ -43,6 +44,8 @@ POSSIBILITY OF SUCH DAMAGE. #include "debug.h" +static inline uint8_t inquiry(void); +static inline uint8_t instant(void); static inline void clock_lo(void); static inline void clock_hi(void); static inline bool clock_in(void); @@ -106,6 +109,23 @@ KEY EVENT: Moreover, the numpad keys =, /, * and + are preceded by shift-down 0x71 on press and shift-up 0xF1 on release. So, the data transferred by nupmad 5 is "79 2F" whereas for numpad + it's "71 79 0D". +ARROW KEYS: + Arrow keys and Pad+,*,/,=(Calc keys) share same byte sequence and its preceding byte + 0x71 and 0xF1 means press and release event of SHIFT. These cause very confusing situation. + It is difficult or impossible to tell Calc key from Arrow key with SHIFT in some cases. + + Raw key events: + press release + ---------------- ---------------- + Left: 0x79, 0x0D 0x79, 0x8D + Right: 0x79, 0x05 0x79, 0x85 + Up: 0x79, 0x1B 0x79, 0x9B + Down: 0x79, 0x11 0x79, 0x91 + Pad+: 0x71, 0x79, 0x0D 0xF1, 0x79, 0x8D + Pad*: 0x71, 0x79, 0x05 0xF1, 0x79, 0x85 + Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B + Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91 + SCAN CODE: m0111_recv_key() function returns follwing scan codes instead of raw key events. Scan codes are 1 byte long and bit7 is set when key is released. @@ -275,16 +295,63 @@ ERROR: uint8_t m0110_recv_key(void) { - uint8_t key; - m0110_send(M0110_INQUIRY); - key = m0110_recv(); - if (key == 0xFF || key == M0110_NULL) - return M0110_NULL; - else - return M0110_RAW2SCAN(key); + static uint8_t keybuf = 0x00; + uint8_t key, key2, key3; + + if (keybuf) { + key = keybuf; + keybuf = 0x00; + return key; + } + key = instant(); // Use INSTANT for better response. Should be INQUIRY ? + switch (key) { + case M0110_KEYPAD: + // Pad/Arrow keys + return (M0110_RAW2SCAN(instant()) | M0110_KEYPAD_OFFSET); + break; + case M0110_SHIFT_MAKE: + case M0110_SHIFT_BREAK: + key2 = instant(); + if (key2 == M0110_KEYPAD) { + key3 = instant(); + switch (key3) { + case M0110_ARROW_UP: + case M0110_ARROW_DOWN: + case M0110_ARROW_LEFT: + case M0110_ARROW_RIGHT: + // Calc keys + return (M0110_RAW2SCAN(key3) | M0110_CALC_OFFSET); + default: + // Shift + Pad/Arrow keys + keybuf = M0110_RAW2SCAN(key3); + return (M0110_RAW2SCAN(key) | M0110_KEYPAD_OFFSET); + } + } else { + // Shift + other keys + keybuf = M0110_RAW2SCAN(key2); + return M0110_RAW2SCAN(key); + } + break; + default: + // other keys + return M0110_RAW2SCAN(key); + break; + } } +static inline uint8_t inquiry(void) +{ + m0110_send(M0110_INQUIRY); + return m0110_recv(); +} + +static inline uint8_t instant(void) +{ + m0110_send(M0110_INSTANT); + return m0110_recv(); +} + static inline void clock_lo() { M0110_CLOCK_PORT &= ~(1<>1)) +#define M0110_RAW2SCAN(key) ( \ + (key == M0110_NULL) ? M0110_NULL : ( \ + (key == M0110_ERROR) ? M0110_ERROR : ( \ + ((key&0x80) | ((key&0x7F)>>1)) \ + ) \ + ) \ +) extern uint8_t m0110_error; @@ -80,5 +96,7 @@ void m0110_init(void); uint8_t m0110_send(uint8_t data); uint8_t m0110_recv(void); uint8_t m0110_recv_key(void); +uint8_t m0110_inquiry(void); +uint8_t m0110_instant(void); #endif diff --git a/m0110_usb/README b/m0110_usb/README deleted file mode 100644 index 6ef98757..00000000 --- a/m0110_usb/README +++ /dev/null @@ -1,55 +0,0 @@ -M0110 to USB keyboard converter -=============================== -This firmware converts the protocol of Apple Macintosh keyboard M0110 into USB. - - -Connection ----------- -You need 4P4C plug and cable to connect Teensy into M0110. -Teensy port F0 is assigned for CLOCK line and F1 for DATA by default, you can change pin configuration with editing config.h.. - -Plug: - http://en.wikipedia.org/wiki/Modular_connector#4P4C - -Pinout: - http://www.kbdbabel.org/conn/kbd_connector_macplus.png - 1(Black): GND - 2(Red): CLOCK - 3(Green): DATA - 4(Yellow): +5V - - - -Build Frimware --------------- -Optionally edit Makefile and config.h for build options, pin configuration or MCU. - -$ cd m0110_usb -$ make -and program your Teensy with loader. - - - -Keymap ------- -You can change a keymap by editing code of keymap.c like following. -How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h. - -This is a default keymap for M0110. -,---------------------------------------------------------. -| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa| -|---------------------------------------------------------| -|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| -|---------------------------------------------------------| -|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| -|---------------------------------------------------------| -|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | -`---------------------------------------------------------' - |Opt|Alt | Space |Alt |Opt| - `-----------------------------------------------' - - -Notes ------ - -EOF diff --git a/m0110_usb/README.md b/m0110_usb/README.md new file mode 100644 index 00000000..a948af91 --- /dev/null +++ b/m0110_usb/README.md @@ -0,0 +1,141 @@ +M0110/M0110A to USB keyboard converter +====================================== +This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB. +Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though, +you can use other board with USB AVR like `ATmega32U4` and `AT90USB`. + +![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg) + +M0110A support was contributed by [skagon@github](https://github.com/skagon). + + + +Connection +---------- +You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard. +Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default, +you can change pin configuration with editing *config.h*. + +You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection +while Macintosh keyboard cable is *straight*. + +[![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg) + +In this pic: + +1. `GND`(Black) +2. `CLOCK`(Red) +3. `DATA`(Green) +4. `+5V`(Yellow) + +Not that wire colors may vary in your cable. + + +### Pinout +- +- + +![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) + + +### Pull-up Registor +You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular +when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose. +In some cases MCU can't read signal from keyboard correctly without pull-up resistors. + + + +Building Frimware +----------------- +To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows. +You can edit *Makefile* and *config.h* to change compile options and pin configuration. + + $ git clone ... (or download source) + $ cd m0110_usb + $ make + +and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html). + + + +Keymap +------ +You can change keymaps by editing *keymap.c*. + +### M0110 +#### *Default* + ,---------------------------------------------------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| + |---------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |---------------------------------------------------------| + |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| + |---------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | + `---------------------------------------------------------' + |Ctr|Alt | Space |Gui |Ctr| + `-----------------------------------------------' + You can register Esc by hitting(press&release) Fn0 quickly. + +#### *HHKB/WASD cursor Layer(Fn0)* + ,---------------------------------------------------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| + |---------------------------------------------------------| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \| + |---------------------------------------------------------| + |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| + |---------------------------------------------------------| + |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shift | + `---------------------------------------------------------' + |Ctr|Alt | Space |Gui |Ctr| + `-----------------------------------------------' + +### M0110A +#### *Default* + ,---------------------------------------------------------. ,---------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *| + |---------------------------------------------------------| |---------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + |-----------------------------------------------------' | |---------------| + |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + |---------------------------------------------------------| |---------------| + |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + |---------------------------------------------------------| |-----------|Ent| + |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| | + `---------------------------------------------------------' `---------------' +#### *HHKB/WASD cursor Layer(Fn0)* + ,---------------------------------------------------------. ,---------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + |---------------------------------------------------------| |---------------| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + |-----------------------------------------------------' | |---------------| + |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + |---------------------------------------------------------| |---------------| + |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| | + |---------------------------------------------------------| |-----------|Ent| + |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| | + `---------------------------------------------------------' `---------------' + + + +Debug +----- +You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. + +The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help. +These function is totally undocumented, tentative, inconsistent and buggy. + + + +Arrow Keys +---------- +Dedicated arrow keys of the M0110A are transmitting the same scancodes as the keypad but also, +its [=], [/], [*] and [+] keys (hereafter referred to as "calc" keys) are not assigned new +scancodes but, instead, transmit a sequence of scancodes which emulates the [Shift] key press, +followed by the same scancode sequence of the arrow keys! +The problem with that approach is that, while in most cases it's easy to distinguish between +a user-generated [Shift] key event (press or release) followed by an arrow or a calc key and +a simulated [Shift] key event generated upon a calc key event, when the user is typing fairly +fast, it is possible that the two events become indistinguishable, and produce undesired results +-- nothing major, though, just one or two stray characters or cursor movements; it will NOT +format your drives, kill your cat or make your wife run away with the pizza boy. diff --git a/m0110_usb/config.h b/m0110_usb/config.h index c12e0738..de20d7c8 100644 --- a/m0110_usb/config.h +++ b/m0110_usb/config.h @@ -30,7 +30,7 @@ along with this program. If not, see . /* matrix size */ -#define MATRIX_ROWS 8 +#define MATRIX_ROWS 14 #define MATRIX_COLS 8 /* Locking Caps Lock support */ @@ -38,8 +38,7 @@ along with this program. If not, see . /* key combination for command */ #define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \ + keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) \ ) diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c index bbb699a9..8c509a59 100644 --- a/m0110_usb/keymap.c +++ b/m0110_usb/keymap.c @@ -14,10 +14,8 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ +/* M0110A Support was contributed by skagon@github */ -/* - * Keymap for ADB keyboard - */ #include #include #include @@ -31,16 +29,12 @@ along with this program. If not, see . #define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) -// Convert physical keyboard layout to matrix array. -// This is a macro to define keymap easily in keyboard layout form. -// TODO: layout for M0110A -/* M0110 */ #define KEYMAP( \ - K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, \ - K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, \ - K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, \ - K3A,K37, K31, K34 \ + K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ + K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \ + K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \ + K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \ + K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \ ) { \ { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ { KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \ @@ -49,7 +43,13 @@ along with this program. If not, see . { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \ { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \ { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO, KB_NO, KB_##K37 }, \ - { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO } \ + { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_##K41, KB_##K42, KB_NO, KB_NO, KB_NO, KB_##K46, KB_##K47 }, \ + { KB_##K48, KB_NO, KB_NO, KB_NO, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ + { KB_NO, KB_NO, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \ + { KB_##K58, KB_##K59, KB_NO, KB_##K5B, KB_##K5C, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_##K62, KB_NO, KB_NO, KB_NO, KB_##K66, KB_NO }, \ + { KB_##K68, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K6D, KB_NO, KB_NO }, \ } @@ -68,9 +68,14 @@ static const uint8_t PROGMEM fn_layer[] = { // Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. // See layer.c for details. static const uint8_t PROGMEM fn_keycode[] = { - KB_SCOLON, // Fn0 - KB_SLASH, // Fn1 + KB_ESC, // Fn0 +#ifdef HASU + KB_SCOLON, // Fn1 + KB_SLASH, // Fn2 +#else + KB_NO, // Fn1 KB_NO, // Fn2 +#endif KB_NO, // Fn3 KB_NO, // Fn4 KB_NO, // Fn5 @@ -79,52 +84,97 @@ static const uint8_t PROGMEM fn_keycode[] = { }; static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // LShift and RShift are logically same one button. - // LOption and ROption are logically same one button. - /* Default Layer: plain keymap - * ,---------------------------------------------------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa| - * |---------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |---------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L|Fn0| '|Return| - * |---------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,|Fn1| Shift| - * `---------------------------------------------------------' - * |Fn2|Alt | Space |Gui |Fn2| - * `-----------------------------------------------' + /* + * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset + * of the M0110 keyboard, with only one exception: the right Alt key(Enter in M0110) does not exist + * on the M0110A, but since it generates a unique scan code which is not used for some other key in + * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost) + * identical to the combination of the M0110 along with the M0120 keypad. The only difference + * (which is causing some problems as you will read below) is that the M0110+M0120 don't have + * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which + * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has + * substituted the [comma] key with the [=] key, however its scancode is the same. + * + * Default: + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Ctrl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + * You can register Esc by hitting(press&release) Fn0 quickly. + * + * HHKB/WASD cursor Layer(Fn0): + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + * + * NOTE: Key between Space and \ in above diagram is M0110 Enter(assigned to Gui). + * NOTE: LShift and RShift are logically same key. (M0110, M0110A) + * NOTE: LOption and ROption are logically same key. (M0110) */ +#ifdef HASU KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, - LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, - FN2, LALT, SPC, LGUI - ), - // vi mousekeys - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, - CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, - LCTL,VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, - NO, LALT, BTN1, LGUI - ), - // vi cusorkeys - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, - CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, NO, - LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, - LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1, - NO, LALT, SPC, LGUI + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, ESC, PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, UP, P1, P2, P3, PENT, + FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT ), // HHKB & WASD KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, - LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, - LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, - FN2, LALT, SPC, LGUI + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, + FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT ), + // vi mousekeys + KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS, + NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT, + LCTL,LALT, BTN1, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + ), + // vi cusorkeys + KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS, + NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + ), +#else + KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + ), + // HHKB & WASD + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, + FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + ), +#endif }; diff --git a/m0110_usb/matrix.c b/m0110_usb/matrix.c index f045920c..11303ee0 100644 --- a/m0110_usb/matrix.c +++ b/m0110_usb/matrix.c @@ -93,6 +93,9 @@ uint8_t matrix_scan(void) #endif if (key == M0110_NULL) { return 0; + } else if (key == M0110_ERROR) { + // TODO: error recovery or reinit + return 0; } else { #ifdef MATRIX_HAS_LOCKING_CAPS if (host_keyboard_leds() & (1< Date: Sat, 28 Apr 2012 02:24:11 +0900 Subject: [PATCH 2/6] Workaround for Mac HID SET_IDLE behaviour. --- pjrc/usb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/pjrc/usb.c b/pjrc/usb.c index 2b69b6a7..89087218 100644 --- a/pjrc/usb.c +++ b/pjrc/usb.c @@ -626,7 +626,7 @@ void usb_remote_wakeup(void) // ISR(USB_GEN_vect) { - uint8_t intbits, t, i; + uint8_t intbits, t; static uint8_t div4=0; intbits = UDINT; @@ -667,13 +667,16 @@ ISR(USB_GEN_vect) usb_keyboard_idle_count++; if (usb_keyboard_idle_count == usb_keyboard_idle_config) { usb_keyboard_idle_count = 0; + /* TODO: fix keyboard_report inconsistency */ +/* To avoid Mac SET_IDLE behaviour. UEDATX = keyboard_report_prev->mods; UEDATX = 0; uint8_t keys = usb_keyboard_protocol ? KBD_REPORT_KEYS : 6; - for (i=0; ikeys[i]; } UEINTX = 0x3A; +*/ } } } From d553289e7edfdf17dfe4fb9cf45a3b23ea2e03df Mon Sep 17 00:00:00 2001 From: tmk Date: Sun, 29 Apr 2012 03:09:40 +0900 Subject: [PATCH 3/6] Ignore release flag when comparing key event. --- m0110.c | 7 +++---- m0110.h | 3 +-- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/m0110.c b/m0110.c index 68ce2d1c..20b4860a 100644 --- a/m0110.c +++ b/m0110.c @@ -304,17 +304,16 @@ uint8_t m0110_recv_key(void) return key; } key = instant(); // Use INSTANT for better response. Should be INQUIRY ? - switch (key) { + switch (key & 0x7F) { case M0110_KEYPAD: // Pad/Arrow keys return (M0110_RAW2SCAN(instant()) | M0110_KEYPAD_OFFSET); break; - case M0110_SHIFT_MAKE: - case M0110_SHIFT_BREAK: + case M0110_SHIFT: key2 = instant(); if (key2 == M0110_KEYPAD) { key3 = instant(); - switch (key3) { + switch (key3 & 0x7F) { case M0110_ARROW_UP: case M0110_ARROW_DOWN: case M0110_ARROW_LEFT: diff --git a/m0110.h b/m0110.h index 39da4ad6..7d2ffa83 100644 --- a/m0110.h +++ b/m0110.h @@ -65,8 +65,7 @@ POSSIBILITY OF SUCH DAMAGE. #define M0110_KEYPAD 0x79 #define M0110_TEST_ACK 0x7D #define M0110_TEST_NAK 0x77 -#define M0110_SHIFT_MAKE 0x71 -#define M0110_SHIFT_BREAK 0xF1 +#define M0110_SHIFT 0x71 #define M0110_ARROW_UP 0x1B #define M0110_ARROW_DOWN 0x11 #define M0110_ARROW_LEFT 0x0D From f5f48c2a240b43e1773c3787b8fca8859f128cf7 Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 15 May 2012 03:41:07 +0900 Subject: [PATCH 4/6] Fix bug on RAW2SCAN. Add work around for M0110A. - Bug fix: Macro RAW2SCAN doesn't work and converted into static inline function. - Add Exceptional handling for M0110A arrow keys and calc keys. - Fix keymap. --- m0110.c | 457 ++++++++++++++++++++------------------- m0110.h | 9 - m0110_usb/doc/m0110.jpg | Bin m0110_usb/doc/teensy.jpg | Bin m0110_usb/keymap.c | 90 ++++---- m0110_usb/matrix.c | 28 ++- rules.mk | 2 +- 7 files changed, 307 insertions(+), 279 deletions(-) mode change 100755 => 100644 m0110_usb/doc/m0110.jpg mode change 100755 => 100644 m0110_usb/doc/teensy.jpg diff --git a/m0110.c b/m0110.c index 20b4860a..638897ae 100644 --- a/m0110.c +++ b/m0110.c @@ -44,6 +44,7 @@ POSSIBILITY OF SUCH DAMAGE. #include "debug.h" +static inline uint8_t raw2scan(uint8_t raw); static inline uint8_t inquiry(void); static inline uint8_t instant(void); static inline void clock_lo(void); @@ -60,6 +61,241 @@ static inline void idle(void); static inline void request(void); +#define WAIT_US(stat, us, err) do { \ + if (!wait_##stat(us)) { \ + m0110_error = err; \ + goto ERROR; \ + } \ +} while (0) + +#define WAIT_MS(stat, ms, err) do { \ + uint16_t _ms = ms; \ + while (_ms) { \ + if (wait_##stat(1000)) { \ + break; \ + } \ + _ms--; \ + } \ + if (_ms == 0) { \ + m0110_error = err; \ + goto ERROR; \ + } \ +} while (0) + + +uint8_t m0110_error = 0; + + +void m0110_init(void) +{ + uint8_t data; + idle(); + _delay_ms(1000); + + // Model Number + // M0110 : 0x09 00001001 : model number 4 (100) + // M0110A: 0x0B 00001011 : model number 5 (101) + // M0110 & M0120: ??? + m0110_send(M0110_MODEL); + data = m0110_recv(); + print("m0110_init model: "); phex(data); print("\n"); + + m0110_send(M0110_TEST); + data = m0110_recv(); + print("m0110_init test: "); phex(data); print("\n"); +} + +uint8_t m0110_send(uint8_t data) +{ + m0110_error = 0; + + request(); + WAIT_MS(clock_lo, 250, 1); // keyboard may block long time + for (uint8_t bit = 0x80; bit; bit >>= 1) { + WAIT_US(clock_lo, 250, 3); + if (data&bit) { + data_hi(); + } else { + data_lo(); + } + WAIT_US(clock_hi, 200, 4); + } + _delay_us(100); // hold last bit for 80us + idle(); + return 1; +ERROR: + print("m0110_send err: "); phex(m0110_error); print("\n"); + _delay_ms(500); + idle(); + return 0; +} + +uint8_t m0110_recv(void) +{ + uint8_t data = 0; + m0110_error = 0; + + WAIT_MS(clock_lo, 250, 1); // keyboard may block long time + for (uint8_t i = 0; i < 8; i++) { + data <<= 1; + WAIT_US(clock_lo, 200, 2); + WAIT_US(clock_hi, 200, 3); + if (data_in()) { + data |= 1; + } + } + idle(); + return data; +ERROR: + print("m0110_recv err: "); phex(m0110_error); print("\n"); + _delay_ms(500); + idle(); + return 0xFF; +} + +uint8_t m0110_recv_key(void) +{ + static uint8_t keybuf = 0x00; + uint8_t key, key2, key3; + + if (keybuf) { + key = keybuf; + keybuf = 0x00; + return key; + } + key = instant(); // Use INSTANT for better response. Should be INQUIRY ? + switch (key & 0x7F) { + case M0110_KEYPAD: + // Pad/Arrow keys + return (raw2scan(instant()) | M0110_KEYPAD_OFFSET); + break; + case M0110_SHIFT: + key2 = instant(); + if (key2 == M0110_KEYPAD) { + key3 = instant(); + switch (key3 & 0x7F) { + case M0110_ARROW_UP: + case M0110_ARROW_DOWN: + case M0110_ARROW_LEFT: + case M0110_ARROW_RIGHT: + // Calc keys + return (raw2scan(key3) | M0110_CALC_OFFSET); + default: + // Shift + Pad/Arrow keys + keybuf = raw2scan(key3); + return (raw2scan(key) | M0110_KEYPAD_OFFSET); + } + } else { + // Shift + other keys + keybuf = raw2scan(key2); + return raw2scan(key); + } + break; + default: + // other keys + return raw2scan(key); + break; + } +} + + +static inline uint8_t raw2scan(uint8_t raw) { + return (raw == M0110_NULL) ? M0110_NULL : ( + (raw == M0110_ERROR) ? M0110_ERROR : ( + ((raw&0x80) | ((raw&0x7F)>>1)) + ) + ); +} + +static inline uint8_t inquiry(void) +{ + m0110_send(M0110_INQUIRY); + return m0110_recv(); +} + +static inline uint8_t instant(void) +{ + m0110_send(M0110_INSTANT); + //return m0110_recv(); + uint8_t data = m0110_recv(); + if (data != 0x7B) { + print("data: "); phex(data); print("\n"); + } + return data; +} + +static inline void clock_lo() +{ + M0110_CLOCK_PORT &= ~(1<>= 1) { - WAIT_US(clock_lo, 250, 3); - if (data&bit) { - data_hi(); - } else { - data_lo(); - } - WAIT_US(clock_hi, 200, 4); - } - _delay_us(100); // hold last bit for 80us - idle(); - return 1; -ERROR: - print("m0110_send err: "); phex(m0110_error); print("\n"); - _delay_ms(500); - idle(); - return 0; -} - -uint8_t m0110_recv(void) -{ - uint8_t data = 0; - m0110_error = 0; - - WAIT_MS(clock_lo, 250, 1); // keyboard may block long time - for (uint8_t i = 0; i < 8; i++) { - data <<= 1; - WAIT_US(clock_lo, 200, 2); - WAIT_US(clock_hi, 200, 3); - if (data_in()) { - data |= 1; - } - } - idle(); - return data; -ERROR: - print("m0110_recv err: "); phex(m0110_error); print("\n"); - _delay_ms(500); - idle(); - return 0xFF; -} - -uint8_t m0110_recv_key(void) -{ - static uint8_t keybuf = 0x00; - uint8_t key, key2, key3; - - if (keybuf) { - key = keybuf; - keybuf = 0x00; - return key; - } - key = instant(); // Use INSTANT for better response. Should be INQUIRY ? - switch (key & 0x7F) { - case M0110_KEYPAD: - // Pad/Arrow keys - return (M0110_RAW2SCAN(instant()) | M0110_KEYPAD_OFFSET); - break; - case M0110_SHIFT: - key2 = instant(); - if (key2 == M0110_KEYPAD) { - key3 = instant(); - switch (key3 & 0x7F) { - case M0110_ARROW_UP: - case M0110_ARROW_DOWN: - case M0110_ARROW_LEFT: - case M0110_ARROW_RIGHT: - // Calc keys - return (M0110_RAW2SCAN(key3) | M0110_CALC_OFFSET); - default: - // Shift + Pad/Arrow keys - keybuf = M0110_RAW2SCAN(key3); - return (M0110_RAW2SCAN(key) | M0110_KEYPAD_OFFSET); - } - } else { - // Shift + other keys - keybuf = M0110_RAW2SCAN(key2); - return M0110_RAW2SCAN(key); - } - break; - default: - // other keys - return M0110_RAW2SCAN(key); - break; - } -} - - -static inline uint8_t inquiry(void) -{ - m0110_send(M0110_INQUIRY); - return m0110_recv(); -} - -static inline uint8_t instant(void) -{ - m0110_send(M0110_INSTANT); - return m0110_recv(); -} - -static inline void clock_lo() -{ - M0110_CLOCK_PORT &= ~(1<>1)) \ - ) \ - ) \ -) - extern uint8_t m0110_error; diff --git a/m0110_usb/doc/m0110.jpg b/m0110_usb/doc/m0110.jpg old mode 100755 new mode 100644 diff --git a/m0110_usb/doc/teensy.jpg b/m0110_usb/doc/teensy.jpg old mode 100755 new mode 100644 diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c index 8c509a59..c6b7cbd3 100644 --- a/m0110_usb/keymap.c +++ b/m0110_usb/keymap.c @@ -58,7 +58,7 @@ static const uint8_t PROGMEM fn_layer[] = { 1, // Fn0 2, // Fn1 3, // Fn2 - 0, // Fn3 + 1, // Fn3 0, // Fn4 0, // Fn5 0, // Fn6 @@ -68,15 +68,17 @@ static const uint8_t PROGMEM fn_layer[] = { // Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. // See layer.c for details. static const uint8_t PROGMEM fn_keycode[] = { +#ifndef HASU KB_ESC, // Fn0 -#ifdef HASU - KB_SCOLON, // Fn1 - KB_SLASH, // Fn2 -#else KB_NO, // Fn1 KB_NO, // Fn2 -#endif KB_NO, // Fn3 +#else + KB_NO, // Fn0 + KB_SCOLON, // Fn1 + KB_SLASH, // Fn2 + KB_UP, // Fn3 +#endif KB_NO, // Fn4 KB_NO, // Fn5 KB_NO, // Fn6 @@ -107,7 +109,6 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |---------------------------------------------------------| |-----------|Ent| * |Ctrl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| | * `---------------------------------------------------------' `---------------' - * You can register Esc by hitting(press&release) Fn0 quickly. * * HHKB/WASD cursor Layer(Fn0): * ,---------------------------------------------------------. ,---------------. @@ -122,49 +123,18 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | 0| .| | * `---------------------------------------------------------' `---------------' * - * NOTE: Key between Space and \ in above diagram is M0110 Enter(assigned to Gui). + * NOTE: You can register Esc by hitting(press&release) Fn0 quickly. + * NOTE: Gui between Space and \ is Enter on M0110 not exists on M0110A. * NOTE: LShift and RShift are logically same key. (M0110, M0110A) * NOTE: LOption and ROption are logically same key. (M0110) */ -#ifdef HASU - KEYMAP( - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, ESC, PEQL,PSLS,PAST, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, - LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, UP, P1, P2, P3, PENT, - FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT - ), - // HHKB & WASD - KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, - LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, - LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, - FN0, LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT - ), - // vi mousekeys - KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, - CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS, - NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS, - LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT, - LCTL,LALT, BTN1, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT - ), - // vi cusorkeys - KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, - CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS, - NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, - LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT, - LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT - ), -#else +#ifndef HASU KEYMAP( GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,PEQL,PSLS,PAST, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, - LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT ), // HHKB & WASD KEYMAP( @@ -172,7 +142,41 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, - LCTL,LALT, SPC, LGUI,BSLS,LEFT,DOWN,RGHT, P0, PDOT + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), +#else + // hasu's keymap + // To enable use this 'make' option: make EXTRAFLAGS=-DHASU + KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, ESC, PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, FN3, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + // HHKB & WASD + KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, FN3, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + // vi mousekeys + KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS, + NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT, + LCTL,LALT, BTN1, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + // vi cusorkeys + KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS, + NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT ), #endif }; diff --git a/m0110_usb/matrix.c b/m0110_usb/matrix.c index 11303ee0..b28045b9 100644 --- a/m0110_usb/matrix.c +++ b/m0110_usb/matrix.c @@ -32,10 +32,15 @@ along with this program. If not, see . #define CAPS 0x39 -#define CAPS_UP (CAPS | 0x80) +#define CAPS_BREAK (CAPS | 0x80) #define ROW(key) ((key)>>3&0x0F) #define COL(key) ((key)&0x07) +#define ARROW_UP_BREAK (0x4D | 0x80) +#define ARROW_DOWN_BREAK (0x48 | 0x80) +#define ARROW_LEFT_BREAK (0x46 | 0x80) +#define ARROW_RIGHT_BREAK (0x42 | 0x80) + static bool is_modified = false; @@ -88,14 +93,27 @@ uint8_t matrix_scan(void) // Send Caps key up event if (matrix_is_on(ROW(CAPS), COL(CAPS))) { is_modified = true; - register_key(CAPS_UP); + register_key(CAPS_BREAK); } #endif if (key == M0110_NULL) { return 0; } else if (key == M0110_ERROR) { - // TODO: error recovery or reinit return 0; + } else if (key == ARROW_UP_BREAK || + key == ARROW_DOWN_BREAK || + key == ARROW_LEFT_BREAK || + key == ARROW_RIGHT_BREAK) { + // WORK AROUND: exceptional handling for M0110A + // Unregister both Arrow key and coressponding Calc key when receive Arrow key break. + // + // Shift + Calc keys(=/*+): + // Send no Shift break(0xF1) when release Calc keys. Can't be desinguished from Arrow keys. + // (press: 0x71, 0x79, 0xXX release: 0x79, 0xXX) + // See m0110.c for key events and scan codes. + is_modified = true; + register_key(key); + register_key(key|M0110_CALC_OFFSET); } else { #ifdef MATRIX_HAS_LOCKING_CAPS if (host_keyboard_leds() & (1< Date: Thu, 17 May 2012 11:27:25 +0900 Subject: [PATCH 5/6] Fix M0110A keymap. --- m0110_usb/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c index c6b7cbd3..31399c34 100644 --- a/m0110_usb/keymap.c +++ b/m0110_usb/keymap.c @@ -152,7 +152,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS, LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, FN3, P1, P2, P3, PENT, - LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, LGUI, PDOT ), // HHKB & WASD KEYMAP( From 805ce3c1309421df6166b085b70f53c494f9946b Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 22 May 2012 00:14:02 +0900 Subject: [PATCH 6/6] Fix key stuck bug of M0110A support. - rewrite special key handling in m0110.c - add mouse keys to keymap --- m0110.c | 229 +++++++++++++++++++++++++++++++++++--------- m0110.h | 2 +- m0110_usb/README.md | 27 ++---- m0110_usb/config.h | 2 +- m0110_usb/keymap.c | 39 ++++---- m0110_usb/matrix.c | 49 +--------- 6 files changed, 213 insertions(+), 135 deletions(-) diff --git a/m0110.c b/m0110.c index 638897ae..a669c85a 100644 --- a/m0110.c +++ b/m0110.c @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun WAKO +Copyright 2011,2012 Jun WAKO This software is licensed with a Modified BSD License. All of this is supposed to be Free Software, Open Source, DFSG-free, @@ -82,6 +82,9 @@ static inline void request(void); } \ } while (0) +#define KEY(raw) ((raw) & 0x7f) +#define IS_BREAK(raw) (((raw) & 0x80) == 0x80) + uint8_t m0110_error = 0; @@ -92,10 +95,6 @@ void m0110_init(void) idle(); _delay_ms(1000); - // Model Number - // M0110 : 0x09 00001001 : model number 4 (100) - // M0110A: 0x0B 00001011 : model number 5 (101) - // M0110 & M0120: ??? m0110_send(M0110_MODEL); data = m0110_recv(); print("m0110_init model: "); phex(data); print("\n"); @@ -153,47 +152,151 @@ ERROR: return 0xFF; } +/* +Handling for exceptional case of key combinations for M0110A + +Shift and Calc/Arrow key could be operated simultaneously: + + Case Shift Arrow Events Interpret + ------------------------------------------------------------------- + 1 Down Down 71, 79, DD Calc(d)*a *b + 2 Down Up 71, 79, UU Arrow&Calc(u)*a + 3 Up Down F1, 79, DD Shift(u) *c + 4 Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a + + Case Shift Calc Events Interpret + ------------------------------------------------------------------- + 5(1) Down Down 71, 71, 79, DD Shift(d) and Cacl(d) + 6(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a + 7(1) Up Down F1, 71, 79, DD Shift(u) and Calc(d) + 8(4) Up Up F1, F1, 79, UU Shift(ux2) and Arrow&Calc(u)*a + +During Calc key is hold: + Case Shift Arrow Events Interpret + ------------------------------------------------------------------- + A(3) ---- Down F1, 79, DD Shift(u) *c + B ---- Up 79, UU Arrow&Calc(u)*a + C Down ---- F1, 71 Shift(u) and Shift(d) + D Up ---- F1 Shift(u) + E Hold Down 79, DD Normal + F Hold Up 79, UU Arrow&Calc(u)*a + G(1) Down Down F1, 71, 79, DD Shift(u)*b and Calc(d)*a + H(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a + I(3) Up Down F1, F1, 79, DD Shift(ux2) *c + J(4) Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a + + Case Shift Calc Events Interpret + ------------------------------------------------------------------- + K(1) ---- Down 71, 79, DD Calc(d)*a + L(4) ---- Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a + M(1) Hold Down 71, 79, DD Calc(d)*a + N Hold Up 79, UU Arrow&Calc(u)*a + + Where DD/UU indicates part of Keypad Down/Up event. + *a: Impossible to distinguish btween Arrow and Calc event. + *b: Shift(d) event is ignored. + *c: Arrow/Calc(d) event is ignored. +*/ uint8_t m0110_recv_key(void) { static uint8_t keybuf = 0x00; - uint8_t key, key2, key3; + static uint8_t keybuf2 = 0x00; + static uint8_t rawbuf = 0x00; + uint8_t raw, raw2, raw3; if (keybuf) { - key = keybuf; + raw = keybuf; keybuf = 0x00; - return key; + return raw; } - key = instant(); // Use INSTANT for better response. Should be INQUIRY ? - switch (key & 0x7F) { + if (keybuf2) { + raw = keybuf2; + keybuf2 = 0x00; + return raw; + } + + if (rawbuf) { + raw = rawbuf; + rawbuf = 0x00; + } else { + raw = instant(); // Use INSTANT for better response. Should be INQUIRY ? + } + switch (KEY(raw)) { case M0110_KEYPAD: - // Pad/Arrow keys - return (raw2scan(instant()) | M0110_KEYPAD_OFFSET); + raw2 = instant(); + switch (KEY(raw2)) { + case M0110_ARROW_UP: + case M0110_ARROW_DOWN: + case M0110_ARROW_LEFT: + case M0110_ARROW_RIGHT: + if (IS_BREAK(raw2)) { + // Case B,F,N: + keybuf = (raw2scan(raw2) | M0110_CALC_OFFSET); // Calc(u) + return (raw2scan(raw2) | M0110_KEYPAD_OFFSET); // Arrow(u) + } + break; + } + // Keypad or Arrow + return (raw2scan(raw2) | M0110_KEYPAD_OFFSET); break; case M0110_SHIFT: - key2 = instant(); - if (key2 == M0110_KEYPAD) { - key3 = instant(); - switch (key3 & 0x7F) { - case M0110_ARROW_UP: - case M0110_ARROW_DOWN: - case M0110_ARROW_LEFT: - case M0110_ARROW_RIGHT: - // Calc keys - return (raw2scan(key3) | M0110_CALC_OFFSET); - default: - // Shift + Pad/Arrow keys - keybuf = raw2scan(key3); - return (raw2scan(key) | M0110_KEYPAD_OFFSET); - } - } else { - // Shift + other keys - keybuf = raw2scan(key2); - return raw2scan(key); + raw2 = instant(); + switch (KEY(raw2)) { + case M0110_SHIFT: + // Case: 5-8,C,G,H + rawbuf = raw2; + return raw2scan(raw); // Shift(d/u) + break; + case M0110_KEYPAD: + // Shift + Arrow, Calc, or etc. + raw3 = instant(); + switch (KEY(raw3)) { + case M0110_ARROW_UP: + case M0110_ARROW_DOWN: + case M0110_ARROW_LEFT: + case M0110_ARROW_RIGHT: + if (IS_BREAK(raw)) { + if (IS_BREAK(raw3)) { + // Case 4: + print("(4)\n"); + keybuf2 = raw2scan(raw); // Shift(u) + keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u) + return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u) + } else { + // Case 3: + print("(3)\n"); + return (raw2scan(raw)); // Shift(u) + } + } else { + if (IS_BREAK(raw3)) { + // Case 2: + print("(2)\n"); + keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u) + return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u) + } else { + // Case 1: + print("(1)\n"); + return (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(d) + } + } + break; + default: + // Shift + Keypad + keybuf = (raw2scan(raw3) | M0110_KEYPAD_OFFSET); + return raw2scan(raw); // Shift(d/u) + break; + } + break; + default: + // Shift + Normal keys + keybuf = raw2scan(raw2); + return raw2scan(raw); // Shift(d/u) + break; } break; default: - // other keys - return raw2scan(key); + // Normal keys + return raw2scan(raw); break; } } @@ -216,10 +319,9 @@ static inline uint8_t inquiry(void) static inline uint8_t instant(void) { m0110_send(M0110_INSTANT); - //return m0110_recv(); uint8_t data = m0110_recv(); - if (data != 0x7B) { - print("data: "); phex(data); print("\n"); + if (data != M0110_NULL) { + phex(data); print(" "); } return data; } @@ -326,7 +428,7 @@ CLOCK is always from KEYBOARD. DATA are sent with MSB first. Protocol -------- COMMAND: - Inquiry 0x10 get key event + Inquiry 0x10 get key event with block Instant 0x12 get key event Model 0x14 get model number(M0110 responds with 0x09) bit 7 1 if another device connected(used when keypad exists?) @@ -341,14 +443,13 @@ KEY EVENT: bit 0 always 1 To get scan code use this: ((bits&(1<<7)) | ((bits&0x7F))>>1). - Note: On the M0110A, the numpad keys and the arrow keys are preceded by 0x79. - Moreover, the numpad keys =, /, * and + are preceded by shift-down 0x71 on press and shift-up 0xF1 on release. - So, the data transferred by nupmad 5 is "79 2F" whereas for numpad + it's "71 79 0D". + Note: On the M0110A, Keypad keys and Arrow keys are preceded by 0x79. + Moreover, some Keypad keys(=, /, * and +) are preceded by 0x71 on press and 0xF1 on release. ARROW KEYS: - Arrow keys and Pad+,*,/,=(Calc keys) share same byte sequence and its preceding byte - 0x71 and 0xF1 means press and release event of SHIFT. These cause very confusing situation. - It is difficult or impossible to tell Calc key from Arrow key with SHIFT in some cases. + Arrow keys and Calc keys(+,*,/,= on keypad) share same byte sequence and preceding byte of + Calc keys(0x71 and 0xF1) means press and release event of SHIFT. This causes a very confusing situation, + it is difficult or impossible to tell Calc key from Arrow key plus SHIFT in some cases. Raw key events: press release @@ -362,9 +463,45 @@ ARROW KEYS: Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91 -SCAN CODE: - m0111_recv_key() function returns follwing scan codes instead of raw key events. - Scan codes are 1 byte long and bit7 is set when key is released. + +RAW CODE: + M0110A + ,---------------------------------------------------------. ,---------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| + |---------------------------------------------------------| |---------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + |-----------------------------------------------------' | |---------------| + |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + |---------------------------------------------------------| |---------------| + |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + |---------------------------------------------------------' |-----------|Ent| + |Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + `---------------------------------------------------------' `---------------' + ,---------------------------------------------------------. ,---------------. + | 65| 25| 27| 29| 2B| 2F| 2D| 35| 39| 33| 3B| 37| 31| 67| |+0F|*11|*1B|*05| + |---------------------------------------------------------| |---------------| + | 61| 19| 1B| 1D| 1F| 23| 21| 41| 45| 3F| 47| 43| 3D| | |+33|+37|+39|+1D| + |-----------------------------------------------------' | |---------------| + | 73| 01| 03| 05| 07| 0B| 09| 4D| 51| 4B| 53| 4F| 49| |+2D|+2F|+31|*0D| + |---------------------------------------------------------| |---------------| + | 71| 0D| 0F| 11| 13| 17| 5B| 5D| 27| 5F| 59| 71|+1B| |+27|+29|+2B| | + |---------------------------------------------------------' |-----------|+19| + | 75| 6F| 63 | 55|+0D|+05|+11| | +25|+03| | + `---------------------------------------------------------' `---------------' + + 0x79, 0xDD / 0xF1, 0xUU + * 0x71, 0x79,DD / 0xF1, 0x79, 0xUU + + +MODEL NUMBER: + M0110: 0x09 00001001 : model number 4 (100) + M0110A: 0x0B 00001011 : model number 5 (101) + M0110 & M0120: ??? + + +Scan Code +--------- + m0110_recv_key() function returns following scan codes instead of raw key events. + Scan codes are 1 byte long and MSB(bit7) is set when key is released. M0110 ,---------------------------------------------------------. diff --git a/m0110.h b/m0110.h index 792a562b..2b95ed34 100644 --- a/m0110.h +++ b/m0110.h @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun WAKO +Copyright 2011,2012 Jun WAKO This software is licensed with a Modified BSD License. All of this is supposed to be Free Software, Open Source, DFSG-free, diff --git a/m0110_usb/README.md b/m0110_usb/README.md index a948af91..92b58f68 100644 --- a/m0110_usb/README.md +++ b/m0110_usb/README.md @@ -105,15 +105,15 @@ You can change keymaps by editing *keymap.c*. `---------------------------------------------------------' `---------------' #### *HHKB/WASD cursor Layer(Fn0)* ,---------------------------------------------------------. ,---------------. - |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2| |---------------------------------------------------------| |---------------| - |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | |MwD|McU|MwU|MwU| |-----------------------------------------------------' | |---------------| - |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD| |---------------------------------------------------------| |---------------| - |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| | - |---------------------------------------------------------| |-----------|Ent| - |Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| | + |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR| | + |---------------------------------------------------------| |-----------|Mb2| + |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | Mb1|Mb3| | `---------------------------------------------------------' `---------------' @@ -124,18 +124,3 @@ You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help. These function is totally undocumented, tentative, inconsistent and buggy. - - - -Arrow Keys ----------- -Dedicated arrow keys of the M0110A are transmitting the same scancodes as the keypad but also, -its [=], [/], [*] and [+] keys (hereafter referred to as "calc" keys) are not assigned new -scancodes but, instead, transmit a sequence of scancodes which emulates the [Shift] key press, -followed by the same scancode sequence of the arrow keys! -The problem with that approach is that, while in most cases it's easy to distinguish between -a user-generated [Shift] key event (press or release) followed by an arrow or a calc key and -a simulated [Shift] key event generated upon a calc key event, when the user is typing fairly -fast, it is possible that the two events become indistinguishable, and produce undesired results --- nothing major, though, just one or two stray characters or cursor movements; it will NOT -format your drives, kill your cat or make your wife run away with the pizza boy. diff --git a/m0110_usb/config.h b/m0110_usb/config.h index de20d7c8..4563d6da 100644 --- a/m0110_usb/config.h +++ b/m0110_usb/config.h @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun Wako +Copyright 2011,2012 Jun Wako This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/m0110_usb/keymap.c b/m0110_usb/keymap.c index 31399c34..939010c6 100644 --- a/m0110_usb/keymap.c +++ b/m0110_usb/keymap.c @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun Wako +Copyright 2011,2012 Jun Wako This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -88,7 +88,7 @@ static const uint8_t PROGMEM fn_keycode[] = { static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset - * of the M0110 keyboard, with only one exception: the right Alt key(Enter in M0110) does not exist + * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist * on the M0110A, but since it generates a unique scan code which is not used for some other key in * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost) * identical to the combination of the M0110 along with the M0120 keypad. The only difference @@ -110,18 +110,19 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| | * `---------------------------------------------------------' `---------------' * - * HHKB/WASD cursor Layer(Fn0): + * HHKB/WASD/Mouse Layer(Fn0): * ,---------------------------------------------------------. ,---------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2| * |---------------------------------------------------------| |---------------| - * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | |MwD|McU|MwU|MwU| * |-----------------------------------------------------' | |---------------| - * |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + * |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD| * |---------------------------------------------------------| |---------------| - * |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | 0| .| | + * |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR| | + * |---------------------------------------------------------| |-----------|Mb2| + * |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | Mb1|Mb3| | * `---------------------------------------------------------' `---------------' + * Mb: Mouse Button / Mc: Mouse Cursor / Mw: Mouse Wheel * * NOTE: You can register Esc by hitting(press&release) Fn0 quickly. * NOTE: Gui between Space and \ is Enter on M0110 not exists on M0110A. @@ -130,7 +131,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ #ifndef HASU KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,PEQL,PSLS,PAST, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,EQL, PSLS,PAST, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, @@ -138,17 +139,17 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), // HHKB & WASD KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, - FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, - LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, P1, P2, P3, PENT, - LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,BTN1,BTN3,BTN2, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, WH_D,MS_U,WH_U,WH_U, + FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, MS_L,MS_D,MS_R,WH_D, + LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, WH_L,MS_D,WH_R,BTN2, + LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, BTN1, BTN3 ), #else // hasu's keymap // To enable use this 'make' option: make EXTRAFLAGS=-DHASU KEYMAP( - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, ESC, PEQL,PSLS,PAST, + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,EQL, PSLS,PAST, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS, LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, FN3, P1, P2, P3, PENT, @@ -156,7 +157,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), // HHKB & WASD KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS, LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, FN3, P1, P2, P3, PENT, @@ -164,7 +165,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), // vi mousekeys KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS, NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS, LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT, @@ -172,7 +173,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), // vi cusorkeys KEYMAP( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,PEQL,PSLS,PAST, + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS, NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT, diff --git a/m0110_usb/matrix.c b/m0110_usb/matrix.c index b28045b9..1ca6894c 100644 --- a/m0110_usb/matrix.c +++ b/m0110_usb/matrix.c @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun Wako +Copyright 2011,2012 Jun Wako This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,11 +36,6 @@ along with this program. If not, see . #define ROW(key) ((key)>>3&0x0F) #define COL(key) ((key)&0x07) -#define ARROW_UP_BREAK (0x4D | 0x80) -#define ARROW_DOWN_BREAK (0x48 | 0x80) -#define ARROW_LEFT_BREAK (0x46 | 0x80) -#define ARROW_RIGHT_BREAK (0x42 | 0x80) - static bool is_modified = false; @@ -48,9 +43,6 @@ static bool is_modified = false; static uint8_t *matrix; static uint8_t _matrix0[MATRIX_ROWS]; -#ifdef MATRIX_HAS_GHOST -static bool matrix_has_ghost_in_row(uint8_t row); -#endif static void register_key(uint8_t key); @@ -100,20 +92,6 @@ uint8_t matrix_scan(void) return 0; } else if (key == M0110_ERROR) { return 0; - } else if (key == ARROW_UP_BREAK || - key == ARROW_DOWN_BREAK || - key == ARROW_LEFT_BREAK || - key == ARROW_RIGHT_BREAK) { - // WORK AROUND: exceptional handling for M0110A - // Unregister both Arrow key and coressponding Calc key when receive Arrow key break. - // - // Shift + Calc keys(=/*+): - // Send no Shift break(0xF1) when release Calc keys. Can't be desinguished from Arrow keys. - // (press: 0x71, 0x79, 0xXX release: 0x79, 0xXX) - // See m0110.c for key events and scan codes. - is_modified = true; - register_key(key); - register_key(key|M0110_CALC_OFFSET); } else { #ifdef MATRIX_HAS_LOCKING_CAPS if (host_keyboard_leds() & (1<